Traffic not displaying with newest version of Avare

[meyer x]

I had been running avare on two identical Samsung Galaxy Tab A tablets. When I updated to the version of Avare on one tablet, no traffic displayed. When I downloaded version 10.0.7, traffic was correctly displayed. I am using the Stratux ADS-B receiver.

[Don Forwood]

I’m jumping in the middle of a thread and I just joined this form and have not totally figured out how to navigate it. But I too have been having zero luck figuring out what I need to do to regain my traffic information on my note 8 cell phone with the avatar application. Any help would be greatly appreciated and I will try to find info in the links hear that might include data that I haven’t tried yet.

[Don Forwood]

I neglected to say that I am using Uavionics echoUAT on my Rans S-6

[Jeffrey Ross]

Don,

there was a previous discussion about this and it should be fixed soon.

The application to enable receiving of ADS-B in data was merged into the main program however the setting to enable receiving data was not set to be "sticky" stay enabled when the program is restarted.

For right now you need to go to the IO tab (found along the bottom) and for most if not all ADS-B in devices that use Wi-Fi set the page to look like this, everything this page will remain set *EXCEPT* the check box for listen, you will need to enable this every time until it is fixed.  (see below).   Do not press "Save" as all this does is write a copy of the ADS-B data to flash which can be used for debugging.

Jeff

--
You received this message because you are subscribed to the Google Groups "Apps4Av Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to apps4av-foru...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/apps4av-forum/9edc4766-4a0b-4e69-88af-8e5c8177ea41n%40googlegroups.com.

[azch...@juno.com]

I think a lot of folks don't realize that you have to "swipe" the strip of tabs at the bottom to the left in order to see the IO tab.  It took me a while to figure that out.   (-:

 

Thanks for all your hard work!

 

Rick

Tucson

To view this discussion on the web visit https://groups.google.com/d/msgid/apps4av-forum/f4b3b50f-b8dc-1d7b-bbce-2d1ab70bf04d%40bubble.org.