Makerspace Door Lock

[Shane Grey]

We've put a new door handle on the main entrance door and connected the electric latch to the controller with the keypad.  

So when you put the code in, there should be a click at the latch, and you will be able to open the door by pulling the handle.  Sometimes it sticks and you might have to push and then pull.

To exit, just turn the handle like a normal door.  No more buttons or bars to press. 

Please leave the handle locked at all times other than during Open Make on Thursdays.  And check it upon leaving to be sure it is latched and locked.

Thank you,

Shane

[James Langner]

Shane, i can't find where i jotted down the door code.  could you refresh me on that.  thanks, jim.  i don't go there much.  it's just nice to stay connected to the wood shop when and if i have a need.  i'm 71, retired and spent most of my life in the woodworking profession.  thanks

--
You received this message because you are subscribed to the Google Groups "appletonmakerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to appletonmakersp...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Shane Grey]

3466. Push handle then pull

[Jamie Schrauth]

Thanks for the code ; )

Jamie Schrauth

[Shane Grey]

Well that was careless of me...

Please hold while I put together locations and instructions for disabling the security cameras!

If you are a member reading this, look for a new key code coming soon.  :-(

Shane

[Pete Prodoehl]

What should I do if I am not a member but now have the door code? ;)


Pete

[Shane Grey]

Please only use it on Thursday nights between 7pm and 9pm.

[Shane Grey]

The door code has been changed.  

The new code is 1337.

Kidding.  

Please check for an email from me for the new code.

Shane

[David Wieneke]

If you don't know the secret answer, don't use the T.A.R.D.I.S.