APC pico itx boards - hard and software

Hi. It can run on 9V, basic, vga and only that. For running Full scale hardware, pen's wifi and

Hello Steve, can you give User & Pass login SSH, please? Thanks quarta-feira, 17 de Junho de 2015

An update on the progress to get wifi working: lsusb shows my wireless card: Bus 001 Device 002: ID

Pada Senin, 15 Juni 2015 03.46.06 UTC+7, Steve Zingman menulis: OK, Let's try this again... <

username: root, password: apricot Op donderdag 6 juni 2013 14:19:19 UTC+2 schreef pahowells: Thanks,

Hi, i went with R4 but LXDE instead of XFCE and problem is solved. Should i upgrade to R5 with MATE -

As stated, no hdmi on latest R5 image. I reall ybattle to get the R5 image to work properly. I

Hi, Just to let you know that I spent a lot of time on it too without any luck. I'm thinking that

Thanks, yes, I ended up figuring out how to activate USB boot with your other script via adb. I'm

Thank you :-) On Wednesday, 4 December 2013 13:39:46 UTC+2, victormee wrote: You need a resistor

Hi, Just to inform : Due to the lack of activity but spam on the wiki I set up, I'll close it.

Folks, I found the root cause. If I stop u-boot before the APC logo been displayed the system will

Folks, After trying some combinations the above worked for me: display-timings { native-mode = <

Panda, I generated the uzImage.bin with the right dtb file path, so this is not the problem root

Hi, I already saw it, and we should give this a try. To be honest, I wrote this in my TODO list a

For now, Nobody wrote this driver, so no. I already ask Tony Prisk, but it will be done when it will

Thanks for the info. Abraços, -- *dS Diego Sueiro Administrador do Portal Embarcados www.embarcados.

i have two 7850 : one with raspbian R3 on sdcard with mpd/alsa to play music in my garden, with

Hi community. I have some good news which are not as news as that. libhybris : https://github.com/

I think nothing has changed there. same shite like before, Spamposts and so on.

I think this article is worth reading: == Old and new limare code, and management overhead... == http

Many thanks.