Gold Medal Models 1 700

[Kenya Ahyet]

SHIPSETSGold Medal Models line of BRASS ETCHED detail sets are the best on the market.

If not 100% pleased you can always return for a complete refund.Web form for Mail in or Fax orders.

$9.00 LP-700/350-1DINTERNATIONAL FLAG DECALS (1/700 & 1/350 SCALE)Ensigns and jacks for US, Canada, UK, Australia, Germany, France, Japan, and USSR from 1933 to 1990 in four sizes each, and merchant house flags for ten lines (Cunard, United States Lines, etc.) in two sizes each. All flags in "windblown" format. Also includes Canadian Maple Leaf funnel insignia in two sizes. Over 200 flags in all. 1/350 and 1/700 ensigns measure five scale feet tall by eight scale feet long.One sheetDISCONTINUED 1/600 scaleLP-600-1NAVAL SHIPRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. **Fits All Airfix 1/600 kits and Revell 1/570 kits.$20.50LP-600-2MERCHANT SHIPRailing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. Fits all 1/600 and 1/570 ocean liner kits by Airfix and Revell.$20.50LP-600-3KING GEORGE VRailing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details. **Fits all Airfix 1/600 kits of WW2 British warships.$20.50LP-600-4BISMARCKRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails.**Fits all Airfix 1/600 WW2 German warship kits.$20.501/500 scaleLP-500-1YAMATORailing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. **Fits Nichimo 1/500 kit.DISCONTINUEDLP-500-2IJN BATTLESHIPRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, searchlight towers for several battleship classes, aircraft catapults and recovery cranes, radar, Ise **Fits all Nichimo kits of Imperial Japanese Navy battleships except Yamato and Musashi.$29.50LP-500-3IJN CRUISER / DESTROYERRailing in several styles, including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery cranes, boat cranes, aircraft propellers, turret antenna masts, torpedo loading gantries, searchlight towers, cranes and flight deck girders for seaplane tender Chitose. **Fits all Nichimo kits of Imperial Japanese Navy Cruisers and Destroyers$29.50LP-500-4IJN AIRCRAFT CARRIERRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety netting, girders and antennas, funnel and mast braces, radars, aircraft propellers **Fits all Nichimo kits of Imperial Japanese Navy Aircraft Carriers$29.50LP-500-5NAVAL SHIPRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. Fits all 1/450 through 1/500 kits Also fits classic Revell kits of Haven and Hope as well as Monogram's Columbus and Chicago. Specific parts for Haven/Hope include helicopter deck netting, deck supports, crane boom rigging, etc. Specific parts for Monogram's Columbus and Chicago include SPS-43 radar, helicopter deck netting, etc.DISCONTINUEDLP-540-6REVELL MIDWAY / FORRESTAL / ESSEX (equips one model)Railing in several styles, vertical and inclined ladders, elevator details, flight deck safety nets and antennas, radars, island and mast details, watertight doors, ship's screws, aircraft propellers. Fits classic Revell kits of post-war Midway, Forrestal. and Essex-class aircraft carriers.$69.00 1/400 scaleLP-400-1NAVAL SHIPRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. ****Fits all Heller 1/400 kits. Also fits classic Revell kits of Hawaiian Pilot, Doctor Lykes, Burleigh, Pine Island, Norton Sound, J. L. Hanna, Mission Capistrano, Randall, and Montrose. Specific parts for Pine Island include crane booms, PBM propellers, 20mm Oerlikon guns, SK-2 radar, etc.$69.00LP-400-2WATERTIGHT DOORSAn assortment of standard size watertight doors for bulkheads plus assorted hatches in several styles for decks, draped fire hoses on racks, and life rings. **Fits all 1/400 and 1/450 models$7.00LP-429-3REVELL ARIZONA Railing in several styles, vertical and inclined ladders, aircraft catapults, aircraft recovery crane, boat crane details, aircraft propellers and struts, mast yardarms, boat details, watertight doors, gun shields, gun tub and bulkhead details. Parts for 1936 and 1941 versions. Fits classic Revell kit of Arizona. Can also be used to build Pennsylvania.$44.00LP-480-4REVELL YORKTOWN / HORNET / ENTERPRISE (equips one model)Railing in several styles, vertical and inclined ladders, elevator pit safety rails, radars, mast and island details, boat details, watertight doors, ship's screws, aircraft propellers. Fits classic Revell kits of World War Two Yorktown, Hornet and Enterprise aircraft carriers.$69.00LP-400-5WORLD WAR TWO GERMAN WARSHIPRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails. (NOTE: Watertight doors, and bulkhead details included in the 1/350 version only.) *Fits all 1/700 waterline kits of WW2 German warships.$69.00LP-400-6EXTRA LADDERS Provides extra sections of vertical ladders in two styles, and extra sections of inclined ladders in three styles. NOTE: 1/700 version also includes ten accommodation ladders in five sizes.) **Fits all 1/350 and 1/400 models.$7.00LP-450-7MERCHANT SHIPProvides railing in several ocean liner styles, stairs in three sizes, ratlines, two styles of wireless antenna spreaders, two types of docking bridge supports, cargo crane details, ship's wheel, life rings, and simulated pulley rigging. Fits ocean liner and merchant ship kits in 1/450, 1/400, and nearby scales.$45.00LP-450-8IJN CARRIER AKAGI Provides railing in several styles including "drooped chain" and solid bar, inclined ladders in three sizes, vertical ladders, mast details, deck edge antennas, flight deck support girders, flight deck safety nets, two flight deck windbreaks, two boat monorail extensions, aircraft propellers and landing gear, four D.F. antennas, island yardarms and mast braces, conning station windows, four flight deck searchlight doors, and over 100 relief-etched crew figures including replicas of Admirals Nagumo and Yamamoto. Fits Hasegawa plastic kit of IJN Aircraft Carrier Akagi in 1/450 scale.$69.00 LP-400-9Queen Mary 2This large new set provides dedicated pre-sized and pre-shaped railing sections for the entire ship in all the correct styles and with assorted relief-etched detailing etched into the rails integrally where needed; special handrails for swimming pools and jacuzzis; special guardrails for spare propeller blades; dedicated handrails for all stairways including stairwell railings; vertical ladder; life rings; inflatable lifeboat gantries in two styles; handwheels for inflatable lifeboat cranes; pool patio lights; cafe rails; cafe furniture (chairs and tables); tennis court net and four racquets; basketball backboard and hoop assemblies; shuffleboard sticks for optional shuffleboard decals supplied in Revell kit; 3-D relief-etched clocks in several styles and two sizes; over 300 pieces of deck furniture in several styles; CCTV cameras; 3-D relief-etched figure of Captain Ron W. Warwick; detailed painting instructions for all parts. Fits Revell/Germany's 1/400 scale kit of Queen Mary $69.00LP-400-10WARD/FOUR PIPERPresized and pre-shaped railings (includes built-in camber for athwartships rails to match Mirage kit decks) for 90% of the ship's decks including optional sizes for different applications; optional simulated canvas-covered railing for upper decks and platforms; vertical and inclined ladders matched in size to the kit's dimensions; detailed searchlight platform tower; see-through bottoms & paddles for life rafts; rudders for ship's boats; detailed manropes for boat davits; depth charge racks; choice of two styles of see-through bridge window frames; ship's helms; detailed replacement yardarms for both masts; D.F. antennas; replacement grilles for funnel caps; watertight doors in open & closed positions; life rings; cable reels for custom work; replacement gunshield for No. 1 4-inch gun mount on Ward; gunsights, handwheels, armor shields, & shoulder rests for 20mm Oerlikon cannon; figure of Ward's captain LCDR William W. Outerbridge. $17.50 Decals LP350-1DNAVAL SHIP DECALS (1/350 - 1/400 SCALE) Shaded hull numbers (5/16", 7/32", and 1/8" tall in 1/350 scale; 5/32", 7/64" and 1/16" tall in 1/700 scale), unshaded hull numbers (1/16" tall in 1/350 scale; 1/32" tall in 1/700 scale), Roman and Arabic numeral draft marks, catapult aircraft insignia, warning stripes, auxiliary ship hull markings, Plimsoll marks, various carrier flight deck stripes, hangar door stripes, "E" efficiency markings in white and red. Two sheets eachDISCONTINUED 1/350 scaleLP-350-1MODERN NEW JERSEY (Parts for 1982 and 1968 versions)Railing in several styles including pre-shaped railing sections for upswept bow, vertical and inclined ladders, flight deck safety netting, aircraft crane, SPS-6, SPS-10, and SPS-49 radars, helicopter refuelling stations, SH-60 helicopter rotors, UnRep gear details, bridge window frames, life raft backs, funnel cap grilles, various ECM and mast details, Stokes litters, watertight doors and assorted bulkhead details. Fits Tamiya or Revell modernized USS New Jersey.$69.00LP-350-2ENTERPRISE CVAN65Railing in several styles including specialized rails for mast yardarms and aircraft elevators, vertical and inclined ladders, accommodation ladders, pre-shaped flight deck safety netting, aircraft refuelling hose reels, island safety cage ladders, perforated mast yardarms, SPS-10, SPS-48, and SPS-49 radars, SatCom and RDF antennas, watertight doors, bicycles, and Stokes litters.Fits Tamiya nuclear-powered aircraft carrier Enterprise (CVN-65).(SEE ALSO: LP-350-2A 1/350 Enterprise Elevators)$69.00LP-350-2AENTERPRISE ELEVATOR PLATFORMSPerforated elevator platforms to replace the four solid plastic platforms included in Tamiya kit of CVN-65 USS Enterprise in 1/350 scale. Etched in heavy sheet brass with full see-through gridwork, reinforcing strips, tie-down rings, and even the extended plating on Elevator No. 2 as seen in prototype reference photos. Sheet styrene can be used for side plating on underside by using the kit's elevators as guides, or the plastic side plating may be carefully cut away from the Tamiya elevators and transferred to the etched brass versions if desired. These four etched platforms are exact matches for the plastic parts to ensure a precise fit. Instructions are etched into the edge of the brass sheet. Fits Tamiya nuclear-powered aircraft carrier Enterprise (CVN-65).$41.50LP-350-3MERCHANT SHIP (Titanic / Lusitania)Railing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. Fits Entex/Minicraft Titanic and Entex/Gunze/Revell Lusitania. Also see sheet LP-350-15 for further detail parts for these models.$69.00LP-350-4WORLD WAR TWO BATTLESHIP MISSOURI (UPGRADED!)Railing in several styles including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery crane, cable reels, 20mm gun armor shields, funnel cap grilles, Mk. 37 director radars, SK, SK-2, Mk. 3, Mk. 27, and SG radars, ECM antennas, yardarms, bridge window frames, aircraft propellers, watertight doors, and assorted bulkhead details. **Fits Tamiya or Revell Missouri. Includes surrender table & chairs.$69.00LP-350-4AGOLD PLUS MISSOURI FINE DETAILSRecommended for experienced modelers only. Provides armor shields (with forming template), pre-shaped gunsights, & pre-sized safety railing for 40mm Quadruple Bofors anti-aircraft gun mounts, pre-shaped and highly detailed ready ammunition racks for all twenty 40mm Quad Bofors gun tubs; safety railing for No. 2 16" gun turret with drilling jig; vertical and inclined ladders; four sets of accommodation ladders with rigging and bridles; detailed boat cradles; gunsights and access doors for 5" 38 cal. gunhouses; SC-2, SR, and SP radars for other ships of the Iowa-class; perforated access platforms for aft searchlight tubs; perforated platforms with matching railing for funnel caps; highly detailed relief-etched deck hatches and watertight doors in several styles; a full set of older style armor shields for 20mm Oerlikon guns as carried on Iowa; leadsman's platforms; capstan brakewheels; assorted handwheels in several sizes and styles, windshield wipers for bridge windows; detailed relief-etched armored windows and doors for conning tower; 3-D relief-etched covers for all 20mm ready ammunition lockers; pre-shaped conical railing for aft topmast platform; perforated platforms and pinrails for flagbags; highly detailed 3-D relief-etched oxygen and acetylene compressed gas bottles in racks for detailing bulkheads; and extra bulkhead mounted cranes. Complements GMM No. 350-4 WW2 Missouri ship set. (NOTE: This set be used with the older 350-4 WW2 Missouri set as well as the new (2003) and improved version.) Fits Tamiya WW2 battleship Missouri.$69.00LP-350-5YAMATO/MUSASHIRailing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. ***Fits Tamiya 1/350 kit (SEE ALSO: 350-5A Gold PLUS Yamato/Musashi Fine Details)$69.00LP-350-5AGOLD PLUS YAMATO/MUSASHI FINE DETAILSProvides the following fittings: two see-through grilles for the sides of the aft main deck, assorted see-through ventilator grilles for the superstructure, 34 support structures for overhanging decks (1/350 version only - not required in 1/200 version), 3-D relief-etched aircraft trolley track rails and turntables with drilling jig, 32 25mm gun bases, 30 assorted watertight doors, assorted deck hatches, two hawsepipes with covers (1/200 version provides covers only), three strips of bridge window frames, six life buoys with two release racks, four correctly detailed searchlight bases, 15 detailed inclined ladders in four sizes, ten leadsman's and sounding platforms in two styles, two foghorn platforms, a full set of 25mm ammunition box covers, 24 boat oars, six small antennas (1/350 version only), two Type 21 "GO" radar braces, and a Musashi-specific crane kingpost (1/350 version only), 46 mm gun brackets and blast bag baskets (1/200 version only.) Complements GMM No. 350-5 Yamato/Musashi shipset or No. 200-1 Yamato shipset. 1/350 scale version fits Tamiya WW2 battleships Yamato or Musashi; 1/200 scale version fits Nichimo Yamato kit.$38.00LP-350-6BISMARCK/TIRPITZRailing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails. (NOTE: Watertight doors, and bulkhead details included in the 1/350 version only.) *Fits all 1/700 waterline kits of WW2 German warships.$69.00LP-350-7KING GEORGE V/PRINCE OF WALESRailing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details. ***Fits Tamiya 1/350 King George V and Prince of Wales. $69.00LP-350-8NAVAL FIGURES (Set of 100)100 figures, assorted poses, relief etched in brass. **Fits all 1/400 and 1/350 naval ship models.$7.00LP-350-9EXTRA LADDERS Provides extra sections of vertical ladders in two styles, and extra sections of inclined ladders in three styles. NOTE: 1/700 version also includes ten accommodation ladders in five sizes.) **Fits all 1/350 and 1/400 models.$7.00LP-350-1040mm (25) & 20mm (60) GUN DETAILSGunsights, railing, shields, and other details for equipping twenty-five40mm quad Bofors and sixty 20mm Oerlikon anti-aircraft guns. Fits Tamiya Missouri, King George V, and Prince of Wales, plus others.$12.00LP-350-11WATERTIGHT DOORS (172 doors, hatches, fire hose racks, & life rings)An assortment of standard size watertight doors for bulkheads plus assorted hatches in several styles for decks, draped fire hoses on racks, and life rings. ***Fits all 1/350 models.$7.00LP-350-12MODERN USN WARSHIP (Spruance, Ticonderoga, & other classes)Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety nets, SH-60 helicopter rotors, yardarm footrails and anemometers, screws for Spruance and Ticonderoga-class ships (1/350 version only), SPS-6, SPS-10, SPS-12, SPS-29, SPS-40, SPS-49, and OPS-14B radars, masts and platforms for FF-1052 and FFG-7 class ships. **Fits DMLRevell Spruance and Ticonderoga kits (no FF or FFG masts or JMSDF OPS-14B radar)$69.00LP-350-13EMDEN/DRESDENRailing in several styles, vertical and inclined ladders, accommodation ladders and davits, ratlines, boat details, ship's wheels, compass platform, mast platform supports, anchor chainFits Revell Emden and Dresden kits$44.00LP-350-14WORLD WAR 2 FLETCHER-CLASS DESTROYERRailing in several styles, with and without netting, including pre-shaped sections for bridge roof and upswept main deck. Vertical and inclined ladders, depth charges tracks and stowage racks, K-gun loading racks in single-row and double-row styles, gun details, life raft racks, propeller guards, funnel cap grilles, boat details, mast and yardarm details, Mk. 12, Mk. 22, SC, SC-2, and SG radars, ECM antennas, Stokes litters, watertight doors, capstan brake wheels and assorted control wheels. Fits Tamiya Fletcher. Includes parts for round and square bridge versions.$44.00LP-350-15Gold PLUS TITANIC/LUSITANIA DETAIL SET (Deck chairs, benches, girders, etc.)Replacement X-frame bracing for eight cargo crane booms, crane boom supports (when cranes are stowed), wireless antenna spreaders with integral rigging fittings, docking bridge support girders, ship's wheel, replacement support legs for Titanic's compass tower, lifeboat safety ropes, and 52 fold-to-shape deck lounge chairs. We have recently doubled the size of the 1/350 set, added deck benches, and several other fittings, so it's much more comprehensive than before, specifically with the 'Titanic' in mind. Note that as a result of the much larger sheet, this now retails at a higher price.Supplements GMM No. 350-3. Specific parts for both Titanic and Lusitania kits in 1/350 scale. Illustrated instructions.$32.00LP-350-16OCEAN LINER FIGURES )Set of 218 passengers, crew, orchestra)Ocean Liner Figures: contains over 200 figures relief-etched in 3-D in .013" thick brass for extra depth and detail. Features adult and child passengers, crew figures, and four member of ship's orchestra (three violinists and one cellist) complete with instruments. Also includes figure of Titanic Captain E. J. Smith with beard and overcoat. 3-D features include early 20th Century clothing styles including hats, coats, and ties. Fits 1/350 scale Titanic and Lusitania kits. Painting required. Illustrated instructions.$19.50LP-300-17REVELL USCG CAMPBELL / EASTWIND (AND USN BURTON ISLAND) - Equips both Models Railing in several styles, vertical and inclined ladders, radars, helicopter rotors, helicopter deck safety nets, mast details, depth charge tracks, K-gun loading racks, gun details, crane booms. Fits classic Revell kits of USCG Campbell, Taney, Eastwind (also US Navy Burton Island).$69.00LP-350-18EXTRA USN RAILING (5,000 scale feet in five styles)5,000 scale feet of U.S. Navy style railing including 1, 2, and 3-bar types. Also includes simulated canvas-covered 2-bar rails and pre-curved 3-bar railing for upswept forward decks.$38.00LP-350-19TITANIC LIFEBOAT DAVITS (Set of 20 plus spare parts)Provides replacement davit assemblies (with spares) in 3-D relief-etched .010" brass for Minicraft's 1/350 scale Titanic kit. Can be assembled either in stowed or deployed positions. Fits Minicraft 1/350 scale Titanic kit. Painting required. Illustrated instructions.$37.50LP-350-20KONIG-CLASS DREADNOUGHT WARSHIPOver 4,000 scale feet of railing in four styles including "drooped chain" type for the main decks, solid-type rails for upper decks, and simulated canvas-covered rails for bridge and searchlight platforms; vertical ladders, inclined ladders with perforated sides and correct handrail configurations; funnel cap grilles, skylight covers in eight styles, hatch covers in two styles, watertight doors (open and closed), yardarm footropes, safety rails and hooks for boat derricks, simulated stud-link anchor chains and chain stoppers, rudders, screws, oars, & stern rails for ship's boats, capstan handwheels & brakewheel, screens and covers for bulkhead vents in five styles, torpedo tube doors in two styles, armored doors for main turrets, conning tower, & aft fire control tower, cable reel, simulated rigging for boat davits & small cranes, paddles & see-through bottoms for life rafts, perforated girders for boat cradles, accommodation ladders with perforated platforms, bow crests & stern nameplates for all four ships in the class, bridge details (helm, engine telegraph, & binnacle.) Illustrated instructions include information on backdating the ICM kit to pre-Jutland configuration. Extensive 3-D relief etching throughout. Fits ICM/Ukraine's Konig and Grosser Kurfurst WW1 dreadnought kits.$69.00LP-350-21USS HORNET CV8Railing, ladders, cranes, catwalk and bridge wing supports, leadsman's platforms, CXAM and SC air search radars, Mk. 4 fire control radars, 20mm Oerlikon machine gun details, detailed yardarms, boat rudders and railings, funnel cap grilles, chocks in two styles, three-level ladder structure for island's aft end, life raft paddles, life rings, "horseshoe" life buoys with racks, cable reels, retractable flight deck and elevator safety rails, 1MC speaker faces, watertight doors, B-25 aircraft propellers, ship's screws, conversion parts for pilot house and primary flight control station, relief-etched figure of Lt.Col. James H. Doolittle. Fits Trumpeter kit of WW2 U.S.S. Hornet aircraft carrier.(SEE ALSO: 350-21A 1/350 Gold PLUS Hornet Fine Details and LP-350-26 1/350 WW2 U.S. Navy Aircraft Details)$69.00LP-350-21AGOLD PLUS HORNET FINE DETAILSProvides the following details: See-through perforated catwalks for surrounding funnel and flight deck, arresting gear sheaves, boat chocks, more. Complements GMM No. 350-21 USS Hornet shipset. Fits Trumpeter WW2 carrier Hornet.$69.00LP-350-22USS ESSEX CV9Railing (including custom fitted rails for bow and stern and specialized rails for numerous other areas such as elevators & hangar openings); twelve vertical ladders; 28 inclined ladders (including 16 short ladders for flight deck access); one boat rudder with pulpit & cradles; main and secondary yardarm; search and fire control radars (SK, SK-2, SC-2, SP, SM-1, SG, two Mk. 12 with IFF, and two Mk. 22); assorted smaller antennas (TDY, TDY-1, YE beacon, and two types of ECM antennas); two hooks for cranes; two funnel cap grilles; 28 watertight doors; two mast platform supports; five platforms and two latticework tower masts for all variations of radar installations; one whistle platform; one BM antenna platform; four cable reels; 52 carrier-style floater net baskets; five deck-edge radio antenna masts with protective screens for second and fifth antenna masts; two ventilator grilles; one LSO platform with one catwalk, two choices of windscreens, & safety net; deck-edge elevator girders & nets; three leadsman's platforms; two simulated stud-link anchor chains; and one figure of Admiral Raymond A. Spruance. Fits Trumpeter kits of WW2 U.S.S. Essex-class aircraft carriers. (SEE ALSO: 350-22A 1/350 Gold PLUS Essex Fine Details and LP-350-26 1/350 WW2 U.S. Navy Aircraft Details)$69.00LP-350-22AGOLD PLUS ESSEX FINE DETAILSProvides see-through perforated flight deck catwalks and sub-flight deck gallery catwalks with fold-up handrails; arresting gear sheaves; flight deck barrier supports; 18 sets of fold-to-shape 40mm Quad Bofors armor shields with folding template, gunsights, & choice of early or late styles of guardrails; 60 sets of 20mm Oerlikon anti-aircraft gun armor shields, handwheels, shoulder rests & gunsights; four sets of 5" 38 cal. open gun mount guardrails; two accommodation ladders; choice of early or late styles of tripod mast braces with platforms and integral railings; four styles of fold-to-shape reproducers (loudspeakers) with support brackets; bridge platform wind deflectors; one forward LSO platform with windscreen & safety nets. Complements GMM No. 350-22 Essex ship set. Fits Trumpeter WW2 carrier Essex.$69.00LP-350-23ASSORTED CABLE REELS (USN, IJN, RN, & KM styles)A set of 48 cable reels in twelve styles, four reels of each style. Includes USN, IJN, RN, and KM designs. Relief-etched in 3-D for extra detail. Brass. Can be used with all 1/350 scale model ship kits.$10.00 LP-350-24WW2 USN FLOATER NET BASKETS (70 large, 30 small)A set of 100 floater net baskets as used on World War Two U.S. Navy warships. Includes 70 large baskets and 30 small. Relief- etched in 3-D for extra detail; includes optional support brackets (two for each basket plus spares.) Brass. Can be used with all 1/350 scale WW2 USN model ship kits. $10.00LP-350-25USS ARIZONA/PENNSYLVANIA BB39/BB38Equips Banner's new 1/350 scale plastic kit of the battleship USS ARIZONA. Includes precision-etched "drooped chain" rails pre-sized for the main deck, several styles of railing for all upper decks, catapults, cranes, boat and aircraft details, watertight doors, hatches, 3-D relief-etched window frames for fighting tops, vertical and inclined ladders, accommodation ladders with simulated canvas covering on the rails, range clocks with raised numbers and pointers, and 3-D relief-etched splinter shields for the open 5" gun mounts. Allows the modeler to build the kit as a 1930's version or as the ship appeared at Pearl Harbor in 1941. Also includes fold-to-shape gunshields and detailed radars for converting this kit to sistership Pennsylvania as she appeared in late 1941 through early 1942. 3-D relief etched in brass for extra detail. Can be used with all 1/350 scale 1930's - 1941 USS ARIZONA model ship kits. $69.00LP-350-26WW2 USN AIRCRAFT DETAILSPropellers, landing gear, and tailhooks for WW2 USN carrier-based aircraft of the following types: F4F (x 9), SBD (x 10), F6F (x 10), TBF (x 10), TBD (x 10), F4U (x 10 - includes ten 3-blade and ten 4-blade propellers), SB2C (x 10). Relief-etched for extra detail. Fits Trumpeter kits of WW2 U.S. Navy carrier-based aircraft. Can be adapted to other models as needed.$26.00 LP-350-27Sovremenny (1/350)GMM's new Sovremenny set is unique in that it supplies both early and late mainmasts as well as highly accurate replicas of all three air search radars carried by various ships of this class: The Top Steer, Top Plate, and Plate Steer radars. Also included are Palm Frond radars (three plus one spare), a complete foremast platform and yardarm assembly, numerous perforated platforms, deployed and folded helicopter rotors, details for the ship's boats, and a wide assortment of ECM and direction finding antennas.

Also included is a full set of custom-fitted main deck railing with the correct number and placement of stanchions plus openings for chocks; specialized railing sections for other areas of the ship; two accommodation ladders; a full set of watertight doors in two styles; correct four-blade screws for replacing the incorrect five-blade plastic screws supplied in the kit; flagstaff and jackstaff; inclined and vertical ladders; helicopter deck safety nets; and a pre-shaped helicopter deck landing net. A precision drilling jig is also supplied to assist in the locating of the raised rail that anchors the outer edges of the landing net.

This set will allow a modeler to configure the Trumpeter kit into any version of the Russian Sovremenny destroyer class. It also features extensive 3-D relief etching in .005" brass for extra detail as well as extra fine railin