Reparation Parquet

[Varinia Swicegood]

Leparquet est l'me vivante d'une maison, mais comme tous les revtements intrieurs, le parquet subit l'usure du temps et des nombreux passages : rayure, humidit, fort passage, mauvais entretien, choc et impact divers... voila les diffrents endommagements qui abment votre parquet. Il est alors parfois ncessaire de rparer ou de changer certaines lamelles.

Une fois la lamelle de parquet retire dlicatement sans abmer les lamelles voisine, les lambourdes sur lesquelles sont cloues les lames de parquet sont localises. Les interstices sont nettoys et surtout nous effectuons un contrle scrupuleux des diffrents lments : lambourdes, clous, interstice, lamelles.

Grace nos nombreuses connaissances dans le mtier et la rcupration d'ancienne lamelle de parquets nous avons un stock consquent d'anciennes lamelles qui pourraient convenir avec votre parquet (caractristiques les mmes spcificits).

Afin d'obtenir une rparation solide et esthtique, nos quipes remplacent les lamelles dans le strict respect du style du parquet. Des dcoupes prcises sont ici essentielles afin de respecter les dimensions exactes.

La dernire tape consiste raccorder la teinte et protger (vitrification ou huile) la lamelle. Ce travail est primordial pour que la lamelle de parquet change puisse se fondre dans le restant de la pice.

Une fois le remplacement effectu, il est recommand de respecter les temps de schage. Avant de partir, notre technicien vous fournira tous les renseignements et astuces pour que votre parquet soit correctement entretenu. Et bien sr : toutes nos rparations sont garanties !

To replace the damaged section of parquet, use a matching prefinished tile; if you can't get prefinished tile, finish the new tile to match before installing it. Use the whole tile or one piece of the unit, as required; replace as small an area as possible.

First, remove the damaged piece of wood. If the entire tile or unit is damaged, make a row of large holes across the block, against the grain, with a drill or a brace and bit. Drill completely through the damaged block, but not into the subfloor under it. Then, with a sharp chisel and a hammer, carefully split the block and pry up the pieces. Make sure you don't damage the surrounding pieces of wood.

Most parquet tile is held together with tongue-and-groove joints. At the grooved sides, carefully pull the pieces of the block out over the adjoining tongues. If the grooved sides stick, use the chisel to cut through only the top side of the groove; be careful not to damage the tongues of the abutting pieces. At the tongued sides of the tile, carefully pull out the tongue that held the damaged block to the next tile. If the tongue piece sticks, cut it off with the chisel and then carefully pry out the cut piece.

If only one piece of a parquet tile or unit is damaged, remove only that piece. With a sharp chisel and a hammer, very carefully split the damaged piece and pry out the splinters. If the pieces of the unit are held together by a wire spline, hold the damaged piece of wood with needle-nosed pliers; cut the spline with wire cutters to free the damaged piece.

After removing the damaged piece of wood, prepare the gap for the replacement piece. Scrape the subfloor to remove any remaining adhesive; make sure all parts of the old piece of wood have been removed. If you cut a wire spline to remove the old piece, trim the cut ends flush and tap them lightly with a hammer to flatten the sharp points of the wire.

To replace the damaged wood, use a whole matching tile or one piece of a matching unit. If you're using a whole tile, match the tongued and grooved edges to the surrounding tiles. With a sharp chisel and a hammer, carefully cut off the protruding bottom edges of the grooved sides; the new tile will fit on top of the abutting tongues instead of locking around them. Test the tile for fit to make sure you've cut enough.

If you're using one piece of a matching unit, carefully take the unit apart to remove the desired piece of wood; if necessary, cut the wire spline that holds the piece into the unit. Trim the cut ends of the spline flush, and tap them lightly with a hammer to flatten them. Test the piece of wood for fit in the gap. If the piece is too tight in the opening, sand the edges of the replacement piece lightly with medium-grit sandpaper. Be careful not to damage the finish on the wood.

To complete the repair, glue the new block of wood into position. If you're replacing a whole tile, use floor tile adhesive; apply the adhesive to the subfloor in the opening with a notched spreader. On the grooved sides of the tile, apply a thin coat of carpenters' glue to the bottom edge of the top groove. Carefully set the new tile into place, tongued sides first, to lock into the grooves of the abutting tiles; set the grooved sides firmly down over the abutting tongues.

When the tile is correctly positioned, set a block of scrap wood over it and tap it firmly down with a hammer to bond and level it. The edges of the new tile should be flush with the surface of the surrounding tiles. Quickly remove any excess adhesive with a damp cloth.

If you're replacing one strip or one piece of a unit, use epoxy cement to bond it into place. Mix the epoxy as directed by the manufacturer, and apply the epoxy to the back and to the edges of the replacement piece. Set the piece into place in the opening and tap it into place with a wood block and a hammer to bond and level it. Quickly remove any excess epoxy with a damp cloth.

To make sure the new piece of parquet bonds firmly, cover it with a piece of scrap wood and weight it for the entire curing time of the adhesive or epoxy, as directed by the manufacturer. Let the adhesive or epoxy dry completely before removing the weight. Finally, if the finish on the new piece of wood doesn't blend in with the surrounding floor, polish or wax the entire floor.

Un parquet fendu, fissur ou fortement endommag doit tre rpar. Rnover un parquet donne une seconde vie au revtement de sol en traitant toute sa surface. Rparer un parquet peut se traduire par le remplacement de certains lments du plancher seulement comme une lame dfectueuse, une rayure, etc.

Le travail de rnovation et rparation du parquet bois consiste galement boucher les trous et les fissures qui se sont forms dans les lattes avec de la pte bois base de rsine. Cette solution est moins radicale que le remplacement des lames. Un passage de ponceuse est ensuite ncessaire pour galiser la surface de la latte.

Pour rparer un parquet massif en toute scurit, passez par une entreprise spcialise. Avant de procder la rparation de parquet et du remplacement des lames abimes, il est important de renforcer les lames qui auraient pu bouger ou se dcoller. Les clous qui dpassent doivent tre enfoncs, les lames qui dpassent doivent galement tre visses correctement.

Rparer parquet flottant consiste liminer toutes les bosses et gonflements qui sont frquents surtout aprs un dgt des eaux. La rparation consiste liminer les rayures et remplacer les lames dfectueuses. Aprs avoir t rpar par un parqueteur, le parquet flottant retrouve une parfaite planit.

La Maison Carpentier ralise le cirage, le huilage et la vitrification de votre parquet, aprs le travail rparation Elle ralise les oprations de vitrification sur demande. Faites votre demande de devis en ligne auprs de votre parqueteur pour obtenir les tarifs rnovation parquet bois.

Hardwood Parky floors are not only elegant and authentic, they also require very little maintenance due to their protective layer. This makes your parquet super strong against scratches and dirt. In addition, every Parky plank also has a water-resistant surface. Do you want your fantastic wooden floor to remain stylish for years to come? Follow these easy tips from our floor experts.

By cleaning your floor weekly, you prevent dust and dirt from piling up. This can be easily done with a vacuum cleaner or dust cloth. Do you also like to mop your parquet? You can, because every Parky plank has a water-resistant surface.

Do you know our Parky Wood Floor Cleaner? The specially developed formula removes dirt and protects the wood. You simply dilute the cleaner with water. Apply the cleaner with a wrung mop. Rinse out the dirty mop and wring it out in a second bucket with clean water. Mop again with the wrung clean mop. You can find the Parky Wood Floor Cleaner at our distributors.

Scratch? You can repair it in a jiffy with the Parky Repair Pens. Depending on the color of your floor, there are boxes available with one or two pens. After the repair, dirt can no longer penetrate the scratch.

Interventions auprs des professionnels

Nous ralisons galement des prestations auprs des professionnels : rgies locatives, syndics, propritaires de commerces, restaurants, salles de thtre, de sport, de danse, collectivits, hpitaux, etc. N'hsitez pas nous contacter afin de pouvoir tudier et chiffrer votre projet, en pose et/ou en rnovation de tous types de parquet.

Certaines rparations importantes exigent de faire appel un expert en parquet. Les spcialistes disposent de tous les appareils ncessaires et connaissent la palette de solutions possibles pour offrir une seconde jeunesse votre parquet.

Un parquet en bois apporte charme et authenticit un intrieur. Grce l'innovation technologique, l'entretien des parquets est facile. Que faire en cas de rayure de parquet, de trou ou d'impact ? Des solutions pour le traitement du parquet existent. Parquet cir, parquet huil, parquet vitrifi, la rnovation sans ponceuse est possible. Suivez nos conseils.

3a8082e126