Acer One A0751H-52Bk - High Res Graphics & Wifi Prob - @Devs What Info Can I Provide ?
256 views
Skip to first unread message
letscommunicate.co.uk
Feb 26, 2011, 9:09:38 AM2/26/11
to Android-x86
Hi all.... this is a model slightly before the ones that are shipping
now with Android on board so I thought I should be OK.... it appears
not.
So far off the current live disk only VESA for the display will work
( the others hang just before the GUI ) and wifi most defo does not
work ( although I'll play more as I'm aware it wont work at the same
time as the ethernet ).
When I do enable it in the menu it says error.
So my question to the devs is what infomation do you need to support
this box ? Pretty sure its out there some where as the later models
are supported nativley ?
Also OT on my desktop Atom machine ( a 945 dual core ) I have found
that it runs nice except for cetain menu types like the power off
dialogues.... I tested it on this Acer too and its the same....
Terran
now with Android on board so I thought I should be OK.... it appears
not.
So far off the current live disk only VESA for the display will work
( the others hang just before the GUI ) and wifi most defo does not
work ( although I'll play more as I'm aware it wont work at the same
time as the ethernet ).
When I do enable it in the menu it says error.
So my question to the devs is what infomation do you need to support
this box ? Pretty sure its out there some where as the later models
are supported nativley ?
Also OT on my desktop Atom machine ( a 945 dual core ) I have found
that it runs nice except for cetain menu types like the power off
dialogues.... I tested it on this Acer too and its the same....
Terran
Arobase40
Feb 26, 2011, 9:41:30 AM2/26/11
to Android-x86
May be you can give a try to my first beta which was built for the
Acer Aspire series, even if it was not built nor optimized for the
Atom based Netbooks. Here :
http://groups.google.com/group/android-x86/browse_thread/thread/94c3abfd688def97
At least you can tell me if the display is correct or not. WiFi and
Ethernet may not work, as the chipsets should be differents.
Then send me the most informations you can provide, if you have some
little background with linux : lshal, dmesg, lshw, ...
Use a (Live) Ubuntu version if you can...
On 26 fév, 15:09, "letscommunicate.co.uk"
Acer Aspire series, even if it was not built nor optimized for the
Atom based Netbooks. Here :
http://groups.google.com/group/android-x86/browse_thread/thread/94c3abfd688def97
At least you can tell me if the display is correct or not. WiFi and
Ethernet may not work, as the chipsets should be differents.
Then send me the most informations you can provide, if you have some
little background with linux : lshal, dmesg, lshw, ...
Use a (Live) Ubuntu version if you can...
On 26 fév, 15:09, "letscommunicate.co.uk"
letscommunicate.co.uk
Feb 26, 2011, 9:49:54 AM2/26/11
to Android-x86
Thanks... I'll give that a go later..... I have a littel unix so
should be OK grabbing that report too ( I hope ;) _)
T
On Feb 26, 2:41 pm, Arobase40 <arobas...@gmail.com> wrote:
> May be you can give a try to my first beta which was built for the
> Acer Aspire series, even if it was not built nor optimized for the
> Atom based Netbooks. Here :
>
> http://groups.google.com/group/android-x86/browse_thread/thread/94c3a...
should be OK grabbing that report too ( I hope ;) _)
T
On Feb 26, 2:41 pm, Arobase40 <arobas...@gmail.com> wrote:
> May be you can give a try to my first beta which was built for the
> Acer Aspire series, even if it was not built nor optimized for the
> Atom based Netbooks. Here :
>
letscommunicate.co.uk
Feb 26, 2011, 3:01:48 PM2/26/11
to Android-x86
Right.... had problems withj Ubuntu booting which was odd so used my
Parted Magic disk.... if this is not what you need let me know and
I'll look in to the ubunto boot prob..... I think its looking for a
driver to use the USB DVD I have....
T
Computer
product: AO751h
vendor: Acer
version: Not Applicable
serial:
width: 32 bits
capabilities
PartedMagic:~# dmesg
k.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
hpet
clockevent registered
Calibrating delay using timer specific routine.. 2662.21 BogoMIPS
(lpj=1331109)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K,
L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20080321
ACPI: setting ELCR to 0200 (from
0cb8)
CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine..
2659.87 BogoMIPS (lpj=1329935)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture
supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU Z520 @
1.33GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (5322.08 BogoMIPS).
net_namespace:
660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock devices found.
EISA bus registered
ACPI: bus type pci
registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config
space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via
DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI
Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6
7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI
Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link
[LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c)
Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI
subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered
new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: iomem range 0xfd000000-0xfd003fff has been reserved
system 00:01: iomem range 0x3f800000-0xafffffff
could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed00000-0xfed3ffff could not be
reserved
system 00:01: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:05: ioport range 0x110-0x12e has been reserved
system 00:05: ioport range
0x374-0x375 has been reserved
system 00:05: ioport range 0x3f4-0x3f5 has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05:
ioport range 0x8080-0x8080 has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x1180-0x11bf has been
reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
Switched to high resolution mode
on CPU 1
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0x88000000-0x880fffff
PREFETCH window: 0x00000000d0100000-0x00000000d01fffff
PCI:
Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xd0000000-0xd00fffff
PREFETCH window: disabled.
pci 0000:00:1c.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 4 (level,
low)
-> IRQ 4
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ
7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device
0000:00:1c.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP
reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like
an initrd
Freeing initrd memory: 11742k
freed
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
fuse init (API version 7.9)
JFS: nTxBlock = 7071, nTxLock = 56571
SGI XFS with
security attributes, large block numbers, no debug enabled
msgmni has been set to 1767
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io
scheduler noop registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
Allocate Port Service
[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
Allocate Port Service
[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
vesafb: cannot reserve video memory at 0x7f800000
vesafb: framebuffer at 0x7f800000, mapped to
0xf8c80000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5,
shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI Error (evxfevnt-0186): Could not enable
PowerButton event [20080321]
ACPI Warning (evxface-0145): Could not enable fixed event 2 [20080321]
input: Lid Switch as /class/input/input0
ACPI: Lid Switch
[LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM)
[SLPB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input3
Loading iSCSI transport class v2.0-869.
Driver 'sd' needs updating - please
use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
usbcore: registered new interface driver libusual
PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio:
i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64
irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot
2
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Starting balanced_irq
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as
/class/input/input4
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 368k freed
ACPI: WMI:
Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
r8169 0000:02:00.0: enabling device (0004 ->
0007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device 0000:02:00.0 to 64
r8169
0000:02:00.0: unknown MAC (27c00000)
eth0: RTL8169 at 0xf8c4c000, 00:26:9e:64:99:f7, XID 24c00000 IRQ 223
USB Universal Host Controller Interface driver v3.0
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as
level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base
0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found,
idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer:
Linux 2.6.26-pmagic uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI:
PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI
Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001840
usb usb2: configuration #1
chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb2:
SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link
[LNKC] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2:
new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB
hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI
Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of
device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd
0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0054000
usb 2-1: new full
speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
hub 2-0:1.0: unable
to enumerate USB device on port 1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb
usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-pmagic ehci_hcd
usb
usb4: SerialNumber: 0000:00:1d.7
pata_sch 0000:00:1f.1: version 0.2
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : pata_sch
scsi1 : pata_sch
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
usb 4-3: new high speed USB
device using ehci_hcd and address 2
ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
usb 4-3: configuration #2
chosen from 1 choice
usb 4-3: New USB device found, idVendor=07ab, idProduct=fc03
usb 4-3: New USB device strings: Mfr=73, Product=81, SerialNumber=93
usb 4-3:
Product: USB-2 Drive
usb 4-3: Manufacturer: FREECOM
usb 4-3: SerialNumber: 1E0D377BFC500DA3FW150
ata1.00: configured for UDMA/100
Initializing USB Mass Storage
driver...
scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd
0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd
0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:<6>usb 4-4: new high speed USB device using ehci_hcd and address
3
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system
bus speed for PIO modes; override with idebus=xx
usb 4-4: configuration #1 chosen from 1 choice
usb 4-4: New USB device found, idVendor=064e, idProduct=a102
usb
4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-4: Product: WebCam
usb 4-4: Manufacturer: SuYin
usb 4-4: SerialNumber: CN0316-S30C-OV061-
VA-R02.02.02
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-
storage: device found at 2
usb-storage: waiting for device to settle before scanning
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb-storage: device scan
complete
scsi 2:0:0:0: CD-ROM PIONEER DVD-ROM DVD-105 1.22 PQ: 0
ANSI: 0
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM
driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA
probe: not found.
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
mtrr: type mismatch for 7ffa0000,10000 old:
write-back new: write-combining
mtrr: type mismatch for 7ff80000,20000 old: write-back new: write-
combining
mtrr: type mismatch for 7ff00000,80000 old: write-
back new: write-combining
mtrr: type mismatch for 7fe00000,100000 old: write-back new: write-
combining
mtrr: type mismatch for 7fc00000,200000 old: write-back
new: write-combining
mtrr: type mismatch for 7f800000,400000 old: write-back new: write-
combining
splashy[2425]: segfault at 4 ip 080c72b2 sp bfdbd240 error 4
in splashy (deleted)[8048000+1f9000]
root@PartedMagic:~# dmesg /?
k.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0
-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 2662.21 BogoMIPS
(lpj=1331109)
Mount-cache hash
table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel
machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision
20080321
ACPI: setting ELCR to 0200 (from 0cb8)
CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2659.87 BogoMIPS
(lpj=1329935)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical
Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
CPU1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2
processors activated (5322.08 BogoMIPS).
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock
devices found.
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000
reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look
up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-
query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0xd, I/O: command/status =
0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI
Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10
12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt
Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs
1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type
pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore:
registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3
64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: iomem range 0xfd000000-0xfd003fff has been
reserved
system 00:01: iomem range 0x3f800000-0xafffffff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system
00:01: iomem range 0xfed00000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:05: ioport range
0x110-0x12e has been reserved
system 00:05: ioport range 0x374-0x375 has been reserved
system 00:05: ioport range 0x3f4-0x3f5 has been reserved
system 00:05:
ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x8080-0x8080 has been reserved
system 00:05: ioport range 0x1000-0x107f has been
reserved
system 00:05: ioport range 0x1180-0x11bf has been reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range
0xfe00-0xfe00 has been reserved
Switched to high resolution mode on CPU 1
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0x88000000-0x880fffff
PREFETCH window: 0x00000000d0100000-0x00000000d01fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xd0000000-0xd00fffff
PREFETCH window:
disabled.
pci 0000:00:1c.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI
Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ
4
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: enabling
device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA]
-> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1c.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries:
32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it
isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 11742k freed
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
fuse init
(API version 7.9)
JFS: nTxBlock = 7071, nTxLock = 56571
SGI XFS with security attributes, large block numbers, no debug
enabled
msgmni has been set to 1767
Block
layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency
timer of device 0000:00:1c.0 to 64
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device
0000:00:1c.1 to 64
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
vesafb: cannot reserve video memory at 0x7f800000
vesafb: framebuffer at 0x7f800000, mapped to 0xf8c80000, using 3072k,
total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling:
redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI Error
(evxfevnt-0186): Could not enable PowerButton event [20080321]
ACPI Warning (evxface-0145): Could not enable fixed event 2 [20080321]
input: Lid Switch as
/class/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as
/class/input/input2
ACPI: Sleep Button (CM) [SLPB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux
agpgart interface v0.103
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input3
Loading iSCSI transport class
v2.0-869.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
usbcore: registered new interface
driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042
KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Starting balanced_irq
Using IPI Shortcut mode
input: AT
Translated Set 2 keyboard as /class/input/input4
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel
memory: 368k freed
ACPI: WMI: Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
r8169 0000:02:00.0:
enabling device (0004 -> 0007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device
0000:02:00.0 to 64
r8169 0000:02:00.0: unknown MAC (27c00000)
eth0: RTL8169 at 0xf8c4c000, 00:26:9e:64:99:f7, XID 24c00000 IRQ 223
USB Universal Host Controller
Interface driver v3.0
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device
0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq
11, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found,
idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer:
Linux 2.6.26-pmagic uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI:
PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI
Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001840
usb usb2: configuration #1
chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb2:
SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link
[LNKC] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2:
new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB
hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI
Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of
device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd
0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0054000
usb 2-1: new full
speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
hub 2-0:1.0: unable
to enumerate USB device on port 1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb
usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-pmagic ehci_hcd
usb
usb4: SerialNumber: 0000:00:1d.7
pata_sch 0000:00:1f.1: version 0.2
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : pata_sch
scsi1 : pata_sch
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
usb 4-3: new high speed USB
device using ehci_hcd and address 2
ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
usb 4-3: configuration #2
chosen from 1 choice
usb 4-3: New USB device found, idVendor=07ab, idProduct=fc03
usb 4-3: New USB device strings: Mfr=73, Product=81, SerialNumber=93
usb 4-3:
Product: USB-2 Drive
usb 4-3: Manufacturer: FREECOM
usb 4-3: SerialNumber: 1E0D377BFC500DA3FW150
ata1.00: configured for UDMA/100
Initializing USB Mass Storage
driver...
scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd
0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd
0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:<6>usb 4-4: new high speed USB device using ehci_hcd and address
3
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system
bus speed for PIO modes; override with idebus=xx
usb 4-4: configuration #1 chosen from 1 choice
usb 4-4: New USB device found, idVendor=064e, idProduct=a102
usb
4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-4: Product: WebCam
usb 4-4: Manufacturer: SuYin
usb 4-4: SerialNumber: CN0316-S30C-OV061-
VA-R02.02.02
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-
storage: device found at 2
usb-storage: waiting for device to settle before scanning
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb-storage: device scan
complete
scsi 2:0:0:0: CD-ROM PIONEER DVD-ROM DVD-105 1.22 PQ: 0
ANSI: 0
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM
driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA
probe: not found.
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
mtrr: type mismatch for 7ffa0000,10000 old:
write-back new: write-combining
mtrr: type mismatch for 7ff80000,20000 old: write-back new: write-
combining
mtrr: type mismatch for 7ff00000,80000 old: write-
back new: write-combining
mtrr: type mismatch for 7fe00000,100000 old: write-back new: write-
combining
mtrr: type mismatch for 7fc00000,200000 old: write-back
new: write-combining
mtrr: type mismatch for 7f800000,400000 old: write-back new: write-
combining
splashy[2425]: segfault at 4 ip 080c72b2 sp bfdbd240 error 4
in splashy (deleted)[8048000+1f9000]
SMBIOS version 2.5,
DMI version 2.5,
SMP specification v1.4,
Symmetric Multi-Processing
configuration:
administrator_password: disabled
boot: oem-specific
cpus: 1
frontpanel_password: unknown
keyboard_password: unknown
power-on_password:
disabled
uuid: 20F4D1F6-CE32-DE11-A541-00269E6499F7
Dumping 65 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons
= {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string
list)
info.interfaces =
{'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames =
{'num_seconds_to_sleep',
'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths =
{'hal-system-
power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-
hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot',
'hal-system-power-
set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names =
{'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown',
'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures =
{'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20080321' (string)
power_management.can_hibernate = false (bool)
power_management.can_suspend = false (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'Acer' (string)
system.chassis.type = 'Other' (string)
system.firmware.release_date = '02/26/2010' (string)
system.firmware.vendor = 'Acer' (string)
system.firmware.version = 'V0.3212' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 33032 (0x8108) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product =
'AO751h' (string)
system.hardware.serial = 'LUS810B277943143222500' (string)
system.hardware.uuid = '20F4D1F6-CE32-DE11-
A541-00269E6499F7' (string)
system.hardware.vendor = 'Acer' (string)
system.hardware.version = 'Not Applicable' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name
= 'Linux' (string)
system.kernel.version = '2.6.26-pmagic' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
info.capabilities =
{'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product =
'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_2'
(string)
input.device = '/dev/input/event3' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/class/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type =
'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_1' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Sleep Button
(CM)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false
(bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1'
(string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
udi =
'/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string
list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Lid Switch'
(string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/class/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.num_levels = 10 (0xa) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/acer-wmi' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames =
{'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths =
{'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'}
(string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names =
{'SetBrightness',
'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''}
(string list)
udi =
'/org/freedesktop/Hal/devices/pnp_SYN1b20'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SYN1b20)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SYN1b20' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.id = 'SYN1b20' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse
support)' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:07' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse
support)' (string)
pnp.id = 'PNP0303' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'AT Real-
Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP
motherboard registers. (Not device
specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'General ID for reserving resources
required by PnP motherboard registers. (Not device
specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:04' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by
PnP motherboard registers. (Not device specific.)'
(string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.linux.driver = 'vesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path =
'/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path =
'/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform'
(string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042
AUX3 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX3_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string)
serio.description = 'i8042 AUX3 port' (string)
serio.id = 'serio4' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX2 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX2_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string)
serio.description = 'i8042 AUX2 port' (string)
serio.id = 'serio3' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
info.linux.driver = 'psmouse' (string)
info.parent =
'/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX1 port' (string)
info.subsystem = 'serio' (string)
info.udi =
'/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string)
serio.description = 'i8042 AUX1 port' (string)
serio.id = 'serio2' (string)
udi =
'/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category
= 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad'
(string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042
AUX0 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX0_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX0 port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-
input'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad',
'input.keys', 'button'} (string list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device =
'/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
input.product = 'AT
Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (eisa.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/eisa.0' (string)
platform.id = 'eisa.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_acer_wmi'
info.linux.driver = 'acer-wmi' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (acer-wmi)'
(string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_acer_wmi' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/acer-wmi' (string)
platform.id = 'acer-wmi' (string)
udi =
'/org/freedesktop/Hal/devices/pci_8086_811a'
info.linux.driver = 'pata_sch' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) IDE
Controller' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_811a' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 128 (0x80)
(int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.
1' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) IDE Controller' (string)
pci.product_id = 33050 (0x811a) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/pci_8086_811a_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_811a' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/
host0' (string)
scsi_host.host = 0 (0x0) (int)
udi =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_811a_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/
target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST9160310AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
(string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
info.product = 'ST9160310AS' (string)
info.udi =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk'
(string)
storage.firmware_version = '0303' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled =
false (bool)
storage.model = 'ST9160310AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device =
'/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 160041885696 (0x25433d6000)
(uint64)
storage.requires_eject = false
(bool)
storage.serial = 'SATA_ST9160310AS_5SV8SWR7' (string)
storage.size = 160041885696 (0x25433d6000) (uint64)
storage.vendor = 'ATA' (string)
udi =
'/org/freedesktop/Hal/devices/
volume_uuid_a92d6019_a4d1_4fb4_86ac_cb78a5891c00'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
(string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'}
(string list)
info.parent = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'Android' (string)
info.udi
= '/org/freedesktop/Hal/devices/
volume_uuid_a92d6019_a4d1_4fb4_86ac_cb78a5891c00' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path =
'/sys/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'}
(string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Android' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl',
'user_xattr', 'data='}
(string list)
volume.mount_point = '' (string)
volume.num_blocks = 20482875 (0x1388b3b) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 149552040960 (0x22d1ff0c00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 10487232000 (0x271167600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid
= 'a92d6019-a4d1-4fb4-86ac-cb78a5891c00' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_F63A85663A8524A9'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category =
'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'TBPC1 C' (string)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_F63A85663A8524A9' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2'
(string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'TBPC1 C' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=',
'umask=',
'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 271112940 (0x1028daec) (int)
volume.partition.flags = {'boot'}
(string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 2
(0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 10738466816 (0x280100000) (uint64)
volume.partition.type = '0x07'
(string)
volume.partition.uuid = '' (string)
volume.size = 138809825280 (0x2051b5d800) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'F63A85663A8524A9' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_D82E82552E822C96'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category =
'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'PQSERVICE' (string)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_D82E82552E822C96' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1'
(string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'PQSERVICE' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=',
'umask=',
'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 20971520 (0x1400000) (int)
volume.partition.flags = {} (string
list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 1048576 (0x100000) (uint64)
volume.partition.type = '0x12' (string)
volume.partition.uuid = '' (string)
volume.size = 10737418240 (0x280000000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid
= 'D82E82552E822C96' (string)
udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities =
{'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem =
'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file =
'/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg0'
(string)
scsi_generic.device = '/dev/sg0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_8119'
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'System Controller Hub (SCH Poulsbo) LPC
Bridge' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_8119' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0)
(int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.
0' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) LPC Bridge' (string)
pci.product_id = 33049 (0x8119) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/pci_8086_8117'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'System Controller Hub (SCH Poulsbo) USB EHCI
#1' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_8117' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20)
(int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
7' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) USB EHCI #1' (string)
pci.product_id = 33047 (0x8117) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8117' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 8 (0x8) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed =
480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'WebCam' (string)
info.subsystem = 'usb_device' (string)
info.udi
= '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.vendor = 'Suyin Corp.' (string)
linux.device_file =
'/dev/bus/usb/004/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 239 (0xef) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 546 (0x222) (int)
usb_device.device_subclass = 2 (0x2) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports
= 0 (0x0) (int)
usb_device.product = 'WebCam' (string)
usb_device.product_id = 41218 (0xa102) (int)
usb_device.serial = 'CN0316-S30C-OV061-VA-
R02.02.02' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Suyin Corp.' (string)
usb_device.vendor_id = 1614 (0x64e) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if1'
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.product = 'USB Video Interface' (string)
info.subsystem =
'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if1' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.1' (string)
usb.bus_number = 4 (0x4)
(int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1)
(int)
usb.device_revision_bcd = 546 (0x222) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.number = 1
(0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 2 (0x2) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.1' (string)
usb.max_power = 98
(0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video
Interface' (string)
usb.product_id = 41218 (0xa102) (int)
usb.serial = 'CN0316-S30C-OV061-VA-R02.02.02' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Suyin Corp.' (string)
usb.vendor_id = 1614 (0x64e) (int)
usb.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if0'
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.product = 'USB Video Interface' (string)
info.subsystem =
'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if0' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.0' (string)
usb.bus_number = 4 (0x4)
(int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1)
(int)
usb.device_revision_bcd = 546 (0x222) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.description = 'Webcam' (string)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1
(0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 41218 (0xa102) (int)
usb.serial = 'CN0316-S30C-OV061-VA-R02.02.02' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Suyin Corp.' (string)
usb.vendor_id = 1614
(0x64e) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150'
info.linux.driver = 'usb'
(string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB2-IDE IDE bridge' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150' (string)
info.vendor =
'Freecom Technologies' (string)
linux.device_file = '/dev/bus/usb/004/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up =
false (bool)
usb_device.configuration_value = 2 (0x2) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 4368 (0x1110) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports
= 0 (0x0) (int)
usb_device.product = 'USB2-IDE IDE bridge' (string)
usb_device.product_id = 64515 (0xfc03) (int)
usb_device.serial =
'1E0D377BFC500DA3FW150' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Freecom Technologies' (string)
usb_device.vendor_id = 1963
(0x7ab) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0'
info.linux.driver =
'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150' (string)
info.product = 'USB Mass Storage
Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3/4-3:2.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 2 (0x2) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 4368 (0x1110) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8)
(int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered =
true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3/4-3:2.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 64515 (0xfc03) (int)
usb.serial = '1E0D377BFC500DA3FW150' (string)
usb.speed =
480.0 (480) (double)
usb.vendor = 'Freecom Technologies' (string)
usb.vendor_id = 1963 (0x7ab) (int)
usb.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category =
'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
info.product = 'SCSI Host
Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-
3/4-3:2.0/host2' (string)
scsi_host.host = 2 (0x2) (int)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem =
'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-3/4-
3:2.0/host2/target2:0:0/2:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'DVD-ROM DVD-
105' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'PIONEER' (string)
udi =
'/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0'
block.device = '/dev/sr0' (string)
block.is_volume = false
(bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string
list)
info.category = 'storage' (string)
info.interfaces =
{'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'DVD-ROM DVD-105' (string)
info.udi = '/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0' (string)
info.vendor = 'PIONEER' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames =
{'extra_options',
'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-
eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject',
'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'}
(string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false
(bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = false (bool)
storage.cdrom.cdrw = false (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdplusrdl = false (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusrwdl = false
(bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 7040 (0x1b80) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.write_speeds = {} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1.22' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVD-ROM DVD-105' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
storage.partitioning_scheme = ''
(string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.media_size = 46657536 (0x2c7f000) (uint64)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'PIONEER_DVD-ROM_DVD-
105_1E0D377BFC500DA3FW150-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'PIONEER' (string)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'}
(string list)
info.category = 'scsi_generic' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface'
(string)
info.subsystem = 'scsi_generic' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file =
'/dev/sg1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg1'
(string)
scsi_generic.device = '/dev/sg1' (string)
udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub'
(string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem
= 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0)
(int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1
(0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations =
1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 8 (0x8) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2
(0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531
(0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8116'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#3' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8116' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
2' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#3' (string)
pci.product_id = 33046 (0x8116) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8116' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/
usb3' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/
usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8115'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#2' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8115' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
1' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#2' (string)
pci.product_id = 33045 (0x8115) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8115' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/
usb2' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/
usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8114'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#1' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8114' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#1' (string)
pci.product_id = 33044 (0x8114) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8114' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/
usb1' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/
usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8112'
info.linux.driver = 'pcieport-driver' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
2' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8112' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
1' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
2' (string)
pci.product_id = 33042 (0x8112) (int)
pci.subsys_product_id = 0 (0x0)
(int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_14e4_4315'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_8112' (string)
info.product = 'BCM4310 USB Controller'
(string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4315' (string)
info.vendor = 'Broadcom Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
1/0000:03:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.product = 'BCM4310 USB Controller' (string)
pci.product_id = 17173 (0x4315) (int)
pci.subsys_product_id = 57371 (0xe01b) (int)
pci.subsys_vendor = 'Foxconn International, Inc.' (string)
pci.subsys_vendor_id = 4187 (0x105b) (int)
pci.vendor = 'Broadcom Corporation' (string)
pci.vendor_id = 5348 (0x14e4) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_8110'
info.linux.driver =
'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) PCI Express
Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8110' (string)
info.vendor = 'Intel Corporation'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
1' (string)
pci.product_id = 33040
(0x8110) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id =
32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_10ec_8136'
info.linux.driver = 'r8169' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8110' (string)
info.product = 'RTL8101E PCI Express Fast Ethernet
controller' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string)
info.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
linux.hotplug_type =
2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
0/0000:02:00.0' (string)
pci.device_class = 2
(0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string)
pci.product = 'RTL8101E PCI Express Fast Ethernet
controller' (string)
pci.product_id =
33078 (0x8136) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133
(0x1025) (int)
pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.vendor_id = 4332 (0x10ec) (int)
udi =
'/org/freedesktop/Hal/devices/net_00_26_9e_64_99_f7'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string
list)
info.category = 'net.80203'
(string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string
list)
info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/
net_00_26_9e_64_99_f7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string)
net.80203.mac_address =
165866150391 (0x269e6499f7) (uint64)
net.address = '00:26:9e:64:99:f7' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/
pci_10ec_8136' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '',
'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-
system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-
enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names =
{'GetSupported',
'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '',
'b'} (string list)
udi =
'/org/freedesktop/Hal/devices/pci_8086_811b'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo) HD Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_811b' (string)
info.vendor =
'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3)
(int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.
0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) HD Audio
Controller'
(string)
pci.product_id = 33051 (0x811b) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_8086_8108'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo) Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8108' (string)
info.vendor =
'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0)
(int)
pci.linux.sysfs_path = '/sys/devices/
pci0000:00/0000:00:02.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) Graphics
Controller'
(string)
pci.product_id = 33032 (0x8108) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_8086_8100'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8100' (string)
info.vendor = 'Intel Corporation'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo)' (string)
pci.product_id = 33024 (0x8100) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 65 device(s) from the Global Device List.
------------------------------------------------
Parted Magic disk.... if this is not what you need let me know and
I'll look in to the ubunto boot prob..... I think its looking for a
driver to use the USB DVD I have....
T
Computer
product: AO751h
vendor: Acer
version: Not Applicable
serial:
width: 32 bits
capabilities
PartedMagic:~# dmesg
k.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
hpet
clockevent registered
Calibrating delay using timer specific routine.. 2662.21 BogoMIPS
(lpj=1331109)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K,
L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20080321
ACPI: setting ELCR to 0200 (from
0cb8)
CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine..
2659.87 BogoMIPS (lpj=1329935)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture
supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU Z520 @
1.33GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (5322.08 BogoMIPS).
net_namespace:
660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock devices found.
EISA bus registered
ACPI: bus type pci
registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config
space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via
DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI
Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6
7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI
Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link
[LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c)
Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI
subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered
new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: iomem range 0xfd000000-0xfd003fff has been reserved
system 00:01: iomem range 0x3f800000-0xafffffff
could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed00000-0xfed3ffff could not be
reserved
system 00:01: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:05: ioport range 0x110-0x12e has been reserved
system 00:05: ioport range
0x374-0x375 has been reserved
system 00:05: ioport range 0x3f4-0x3f5 has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05:
ioport range 0x8080-0x8080 has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x1180-0x11bf has been
reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
Switched to high resolution mode
on CPU 1
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0x88000000-0x880fffff
PREFETCH window: 0x00000000d0100000-0x00000000d01fffff
PCI:
Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xd0000000-0xd00fffff
PREFETCH window: disabled.
pci 0000:00:1c.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 4 (level,
low)
-> IRQ 4
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ
7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device
0000:00:1c.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP
reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like
an initrd
Freeing initrd memory: 11742k
freed
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
fuse init (API version 7.9)
JFS: nTxBlock = 7071, nTxLock = 56571
SGI XFS with
security attributes, large block numbers, no debug enabled
msgmni has been set to 1767
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io
scheduler noop registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
Allocate Port Service
[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
Allocate Port Service
[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
vesafb: cannot reserve video memory at 0x7f800000
vesafb: framebuffer at 0x7f800000, mapped to
0xf8c80000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5,
shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI Error (evxfevnt-0186): Could not enable
PowerButton event [20080321]
ACPI Warning (evxface-0145): Could not enable fixed event 2 [20080321]
input: Lid Switch as /class/input/input0
ACPI: Lid Switch
[LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM)
[SLPB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input3
Loading iSCSI transport class v2.0-869.
Driver 'sd' needs updating - please
use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
usbcore: registered new interface driver libusual
PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio:
i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64
irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot
2
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Starting balanced_irq
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as
/class/input/input4
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 368k freed
ACPI: WMI:
Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
r8169 0000:02:00.0: enabling device (0004 ->
0007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device 0000:02:00.0 to 64
r8169
0000:02:00.0: unknown MAC (27c00000)
eth0: RTL8169 at 0xf8c4c000, 00:26:9e:64:99:f7, XID 24c00000 IRQ 223
USB Universal Host Controller Interface driver v3.0
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as
level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base
0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found,
idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer:
Linux 2.6.26-pmagic uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI:
PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI
Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001840
usb usb2: configuration #1
chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb2:
SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link
[LNKC] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2:
new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB
hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI
Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of
device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd
0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0054000
usb 2-1: new full
speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
hub 2-0:1.0: unable
to enumerate USB device on port 1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb
usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-pmagic ehci_hcd
usb
usb4: SerialNumber: 0000:00:1d.7
pata_sch 0000:00:1f.1: version 0.2
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : pata_sch
scsi1 : pata_sch
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
usb 4-3: new high speed USB
device using ehci_hcd and address 2
ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
usb 4-3: configuration #2
chosen from 1 choice
usb 4-3: New USB device found, idVendor=07ab, idProduct=fc03
usb 4-3: New USB device strings: Mfr=73, Product=81, SerialNumber=93
usb 4-3:
Product: USB-2 Drive
usb 4-3: Manufacturer: FREECOM
usb 4-3: SerialNumber: 1E0D377BFC500DA3FW150
ata1.00: configured for UDMA/100
Initializing USB Mass Storage
driver...
scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd
0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd
0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:<6>usb 4-4: new high speed USB device using ehci_hcd and address
3
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system
bus speed for PIO modes; override with idebus=xx
usb 4-4: configuration #1 chosen from 1 choice
usb 4-4: New USB device found, idVendor=064e, idProduct=a102
usb
4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-4: Product: WebCam
usb 4-4: Manufacturer: SuYin
usb 4-4: SerialNumber: CN0316-S30C-OV061-
VA-R02.02.02
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-
storage: device found at 2
usb-storage: waiting for device to settle before scanning
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb-storage: device scan
complete
scsi 2:0:0:0: CD-ROM PIONEER DVD-ROM DVD-105 1.22 PQ: 0
ANSI: 0
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM
driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA
probe: not found.
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
mtrr: type mismatch for 7ffa0000,10000 old:
write-back new: write-combining
mtrr: type mismatch for 7ff80000,20000 old: write-back new: write-
combining
mtrr: type mismatch for 7ff00000,80000 old: write-
back new: write-combining
mtrr: type mismatch for 7fe00000,100000 old: write-back new: write-
combining
mtrr: type mismatch for 7fc00000,200000 old: write-back
new: write-combining
mtrr: type mismatch for 7f800000,400000 old: write-back new: write-
combining
splashy[2425]: segfault at 4 ip 080c72b2 sp bfdbd240 error 4
in splashy (deleted)[8048000+1f9000]
root@PartedMagic:~# dmesg /?
k.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0
-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 2662.21 BogoMIPS
(lpj=1331109)
Mount-cache hash
table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel
machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision
20080321
ACPI: setting ELCR to 0200 (from 0cb8)
CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2659.87 BogoMIPS
(lpj=1329935)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical
Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
CPU1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2
processors activated (5322.08 BogoMIPS).
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock
devices found.
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000
reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look
up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-
query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0xd, I/O: command/status =
0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI
Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10
12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt
Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs
1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type
pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore:
registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3
64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: iomem range 0xfd000000-0xfd003fff has been
reserved
system 00:01: iomem range 0x3f800000-0xafffffff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system
00:01: iomem range 0xfed00000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:05: ioport range
0x110-0x12e has been reserved
system 00:05: ioport range 0x374-0x375 has been reserved
system 00:05: ioport range 0x3f4-0x3f5 has been reserved
system 00:05:
ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x8080-0x8080 has been reserved
system 00:05: ioport range 0x1000-0x107f has been
reserved
system 00:05: ioport range 0x1180-0x11bf has been reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range
0xfe00-0xfe00 has been reserved
Switched to high resolution mode on CPU 1
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0x88000000-0x880fffff
PREFETCH window: 0x00000000d0100000-0x00000000d01fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xd0000000-0xd00fffff
PREFETCH window:
disabled.
pci 0000:00:1c.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI
Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ
4
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: enabling
device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA]
-> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1c.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries:
32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it
isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 11742k freed
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
fuse init
(API version 7.9)
JFS: nTxBlock = 7071, nTxLock = 56571
SGI XFS with security attributes, large block numbers, no debug
enabled
msgmni has been set to 1767
Block
layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency
timer of device 0000:00:1c.0 to 64
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device
0000:00:1c.1 to 64
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
vesafb: cannot reserve video memory at 0x7f800000
vesafb: framebuffer at 0x7f800000, mapped to 0xf8c80000, using 3072k,
total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling:
redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI Error
(evxfevnt-0186): Could not enable PowerButton event [20080321]
ACPI Warning (evxface-0145): Could not enable fixed event 2 [20080321]
input: Lid Switch as
/class/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as
/class/input/input2
ACPI: Sleep Button (CM) [SLPB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux
agpgart interface v0.103
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input3
Loading iSCSI transport class
v2.0-869.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
usbcore: registered new interface
driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042
KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Starting balanced_irq
Using IPI Shortcut mode
input: AT
Translated Set 2 keyboard as /class/input/input4
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel
memory: 368k freed
ACPI: WMI: Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
r8169 0000:02:00.0:
enabling device (0004 -> 0007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 7 (level,
low) -> IRQ 7
PCI: Setting latency timer of device
0000:02:00.0 to 64
r8169 0000:02:00.0: unknown MAC (27c00000)
eth0: RTL8169 at 0xf8c4c000, 00:26:9e:64:99:f7, XID 24c00000 IRQ 223
USB Universal Host Controller
Interface driver v3.0
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device
0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq
11, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found,
idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer:
Linux 2.6.26-pmagic uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI:
PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI
Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001840
usb usb2: configuration #1
chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb2:
SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link
[LNKC] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2:
new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB
hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-pmagic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI
Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of
device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd
0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0054000
usb 2-1: new full
speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
hub 2-0:1.0: unable
to enumerate USB device on port 1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb
usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-pmagic ehci_hcd
usb
usb4: SerialNumber: 0000:00:1d.7
pata_sch 0000:00:1f.1: version 0.2
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : pata_sch
scsi1 : pata_sch
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
usb 4-3: new high speed USB
device using ehci_hcd and address 2
ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
usb 4-3: configuration #2
chosen from 1 choice
usb 4-3: New USB device found, idVendor=07ab, idProduct=fc03
usb 4-3: New USB device strings: Mfr=73, Product=81, SerialNumber=93
usb 4-3:
Product: USB-2 Drive
usb 4-3: Manufacturer: FREECOM
usb 4-3: SerialNumber: 1E0D377BFC500DA3FW150
ata1.00: configured for UDMA/100
Initializing USB Mass Storage
driver...
scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd
0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd
0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:<6>usb 4-4: new high speed USB device using ehci_hcd and address
3
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system
bus speed for PIO modes; override with idebus=xx
usb 4-4: configuration #1 chosen from 1 choice
usb 4-4: New USB device found, idVendor=064e, idProduct=a102
usb
4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-4: Product: WebCam
usb 4-4: Manufacturer: SuYin
usb 4-4: SerialNumber: CN0316-S30C-OV061-
VA-R02.02.02
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-
storage: device found at 2
usb-storage: waiting for device to settle before scanning
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb-storage: device scan
complete
scsi 2:0:0:0: CD-ROM PIONEER DVD-ROM DVD-105 1.22 PQ: 0
ANSI: 0
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM
driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA
probe: not found.
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
mtrr: type mismatch for 7ffa0000,10000 old:
write-back new: write-combining
mtrr: type mismatch for 7ff80000,20000 old: write-back new: write-
combining
mtrr: type mismatch for 7ff00000,80000 old: write-
back new: write-combining
mtrr: type mismatch for 7fe00000,100000 old: write-back new: write-
combining
mtrr: type mismatch for 7fc00000,200000 old: write-back
new: write-combining
mtrr: type mismatch for 7f800000,400000 old: write-back new: write-
combining
splashy[2425]: segfault at 4 ip 080c72b2 sp bfdbd240 error 4
in splashy (deleted)[8048000+1f9000]
SMBIOS version 2.5,
DMI version 2.5,
SMP specification v1.4,
Symmetric Multi-Processing
configuration:
administrator_password: disabled
boot: oem-specific
cpus: 1
frontpanel_password: unknown
keyboard_password: unknown
power-on_password:
disabled
uuid: 20F4D1F6-CE32-DE11-A541-00269E6499F7
Dumping 65 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons
= {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string
list)
info.interfaces =
{'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames =
{'num_seconds_to_sleep',
'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths =
{'hal-system-
power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-
hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot',
'hal-system-power-
set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names =
{'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown',
'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures =
{'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20080321' (string)
power_management.can_hibernate = false (bool)
power_management.can_suspend = false (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'Acer' (string)
system.chassis.type = 'Other' (string)
system.firmware.release_date = '02/26/2010' (string)
system.firmware.vendor = 'Acer' (string)
system.firmware.version = 'V0.3212' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 33032 (0x8108) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product =
'AO751h' (string)
system.hardware.serial = 'LUS810B277943143222500' (string)
system.hardware.uuid = '20F4D1F6-CE32-DE11-
A541-00269E6499F7' (string)
system.hardware.vendor = 'Acer' (string)
system.hardware.version = 'Not Applicable' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name
= 'Linux' (string)
system.kernel.version = '2.6.26-pmagic' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
info.capabilities =
{'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product =
'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_2'
(string)
input.device = '/dev/input/event3' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/class/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type =
'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_1' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Sleep Button
(CM)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false
(bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1'
(string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
udi =
'/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string
list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Lid Switch'
(string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/class/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.num_levels = 10 (0xa) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/acer-wmi' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames =
{'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths =
{'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'}
(string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names =
{'SetBrightness',
'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''}
(string list)
udi =
'/org/freedesktop/Hal/devices/pnp_SYN1b20'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SYN1b20)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SYN1b20' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.id = 'SYN1b20' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse
support)' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:07' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse
support)' (string)
pnp.id = 'PNP0303' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'AT Real-
Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP
motherboard registers. (Not device
specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'General ID for reserving resources
required by PnP motherboard registers. (Not device
specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:04' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi =
'/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi =
'/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path =
'/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by
PnP motherboard registers. (Not device specific.)'
(string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.linux.driver = 'vesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path =
'/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path =
'/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042'
(string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform'
(string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042
AUX3 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX3_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string)
serio.description = 'i8042 AUX3 port' (string)
serio.id = 'serio4' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX2 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX2_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string)
serio.description = 'i8042 AUX2 port' (string)
serio.id = 'serio3' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
info.linux.driver = 'psmouse' (string)
info.parent =
'/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX1 port' (string)
info.subsystem = 'serio' (string)
info.udi =
'/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string)
serio.description = 'i8042 AUX1 port' (string)
serio.id = 'serio2' (string)
udi =
'/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category
= 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad'
(string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX1_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042
AUX0 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_AUX0_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX0 port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-
input'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad',
'input.keys', 'button'} (string list)
info.category = 'input'
(string)
info.parent = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device =
'/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/
platform_i8042_i8042_KBD_port' (string)
input.product = 'AT
Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (eisa.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/eisa.0' (string)
platform.id = 'eisa.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_acer_wmi'
info.linux.driver = 'acer-wmi' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (acer-wmi)'
(string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/
platform_acer_wmi' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/acer-wmi' (string)
platform.id = 'acer-wmi' (string)
udi =
'/org/freedesktop/Hal/devices/pci_8086_811a'
info.linux.driver = 'pata_sch' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) IDE
Controller' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_811a' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 128 (0x80)
(int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.
1' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) IDE Controller' (string)
pci.product_id = 33050 (0x811a) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/pci_8086_811a_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_811a' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/
host0' (string)
scsi_host.host = 0 (0x0) (int)
udi =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_811a_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/
target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST9160310AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
(string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
info.product = 'ST9160310AS' (string)
info.udi =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk'
(string)
storage.firmware_version = '0303' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled =
false (bool)
storage.model = 'ST9160310AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device =
'/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 160041885696 (0x25433d6000)
(uint64)
storage.requires_eject = false
(bool)
storage.serial = 'SATA_ST9160310AS_5SV8SWR7' (string)
storage.size = 160041885696 (0x25433d6000) (uint64)
storage.vendor = 'ATA' (string)
udi =
'/org/freedesktop/Hal/devices/
volume_uuid_a92d6019_a4d1_4fb4_86ac_cb78a5891c00'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7'
(string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'}
(string list)
info.parent = '/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'Android' (string)
info.udi
= '/org/freedesktop/Hal/devices/
volume_uuid_a92d6019_a4d1_4fb4_86ac_cb78a5891c00' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path =
'/sys/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'}
(string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Android' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl',
'user_xattr', 'data='}
(string list)
volume.mount_point = '' (string)
volume.num_blocks = 20482875 (0x1388b3b) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 149552040960 (0x22d1ff0c00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 10487232000 (0x271167600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid
= 'a92d6019-a4d1-4fb4-86ac-cb78a5891c00' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_F63A85663A8524A9'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category =
'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'TBPC1 C' (string)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_F63A85663A8524A9' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2'
(string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'TBPC1 C' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=',
'umask=',
'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 271112940 (0x1028daec) (int)
volume.partition.flags = {'boot'}
(string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 2
(0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 10738466816 (0x280100000) (uint64)
volume.partition.type = '0x07'
(string)
volume.partition.uuid = '' (string)
volume.size = 138809825280 (0x2051b5d800) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'F63A85663A8524A9' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_D82E82552E822C96'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category =
'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string
list)
info.parent =
'/org/freedesktop/Hal/devices/
storage_serial_SATA_ST9160310AS_5SV8SWR7' (string)
info.product = 'PQSERVICE' (string)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_D82E82552E822C96' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1'
(string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point
fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-
mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas',
'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage =
'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'PQSERVICE' (string)
volume.linux.is_device_mapper = false
(bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=',
'umask=',
'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 20971520 (0x1400000) (int)
volume.partition.flags = {} (string
list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 1048576 (0x100000) (uint64)
volume.partition.type = '0x12' (string)
volume.partition.uuid = '' (string)
volume.size = 10737418240 (0x280000000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid
= 'D82E82552E822C96' (string)
udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities =
{'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent =
'/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem =
'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/
pci_8086_811a_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file =
'/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg0'
(string)
scsi_generic.device = '/dev/sg0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_8119'
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'System Controller Hub (SCH Poulsbo) LPC
Bridge' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_8119' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0)
(int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.
0' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) LPC Bridge' (string)
pci.product_id = 33049 (0x8119) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/pci_8086_8117'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer'
(string)
info.product = 'System Controller Hub (SCH Poulsbo) USB EHCI
#1' (string)
info.subsystem = 'pci' (string)
info.udi =
'/org/freedesktop/Hal/devices/pci_8086_8117' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem =
'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20)
(int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
7' (string)
pci.product = 'System Controller Hub
(SCH Poulsbo) USB EHCI #1' (string)
pci.product_id = 33047 (0x8117) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer
Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086)
(int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8117' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 8 (0x8) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed =
480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'WebCam' (string)
info.subsystem = 'usb_device' (string)
info.udi
= '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.vendor = 'Suyin Corp.' (string)
linux.device_file =
'/dev/bus/usb/004/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 239 (0xef) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 546 (0x222) (int)
usb_device.device_subclass = 2 (0x2) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports
= 0 (0x0) (int)
usb_device.product = 'WebCam' (string)
usb_device.product_id = 41218 (0xa102) (int)
usb_device.serial = 'CN0316-S30C-OV061-VA-
R02.02.02' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Suyin Corp.' (string)
usb_device.vendor_id = 1614 (0x64e) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if1'
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.product = 'USB Video Interface' (string)
info.subsystem =
'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if1' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.1' (string)
usb.bus_number = 4 (0x4)
(int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1)
(int)
usb.device_revision_bcd = 546 (0x222) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.number = 1
(0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 2 (0x2) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.1' (string)
usb.max_power = 98
(0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video
Interface' (string)
usb.product_id = 41218 (0xa102) (int)
usb.serial = 'CN0316-S30C-OV061-VA-R02.02.02' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Suyin Corp.' (string)
usb.vendor_id = 1614 (0x64e) (int)
usb.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if0'
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02' (string)
info.product = 'USB Video Interface' (string)
info.subsystem =
'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_64e_a102_CN0316_S30C_OV061_VA_R02_02_02_if0' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-4/4-4:1.0' (string)
usb.bus_number = 4 (0x4)
(int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1)
(int)
usb.device_revision_bcd = 546 (0x222) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.description = 'Webcam' (string)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1
(0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 41218 (0xa102) (int)
usb.serial = 'CN0316-S30C-OV061-VA-R02.02.02' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Suyin Corp.' (string)
usb.vendor_id = 1614
(0x64e) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150'
info.linux.driver = 'usb'
(string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB2-IDE IDE bridge' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150' (string)
info.vendor =
'Freecom Technologies' (string)
linux.device_file = '/dev/bus/usb/004/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up =
false (bool)
usb_device.configuration_value = 2 (0x2) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 4368 (0x1110) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports
= 0 (0x0) (int)
usb_device.product = 'USB2-IDE IDE bridge' (string)
usb_device.product_id = 64515 (0xfc03) (int)
usb_device.serial =
'1E0D377BFC500DA3FW150' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Freecom Technologies' (string)
usb_device.vendor_id = 1963
(0x7ab) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0'
info.linux.driver =
'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150' (string)
info.product = 'USB Mass Storage
Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3/4-3:2.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 2 (0x2) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 4368 (0x1110) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8)
(int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered =
true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-3/4-3:2.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 64515 (0xfc03) (int)
usb.serial = '1E0D377BFC500DA3FW150' (string)
usb.speed =
480.0 (480) (double)
usb.vendor = 'Freecom Technologies' (string)
usb.vendor_id = 1963 (0x7ab) (int)
usb.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category =
'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
info.product = 'SCSI Host
Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-
3/4-3:2.0/host2' (string)
scsi_host.host = 2 (0x2) (int)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem =
'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-3/4-
3:2.0/host2/target2:0:0/2:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'DVD-ROM DVD-
105' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'PIONEER' (string)
udi =
'/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0'
block.device = '/dev/sr0' (string)
block.is_volume = false
(bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string
list)
info.category = 'storage' (string)
info.interfaces =
{'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'DVD-ROM DVD-105' (string)
info.udi = '/org/freedesktop/Hal/devices/
storage_serial_PIONEER_DVD_ROM_DVD_105_1E0D377BFC500DA3FW150_0_0' (string)
info.vendor = 'PIONEER' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames =
{'extra_options',
'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-
eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject',
'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'}
(string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false
(bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = false (bool)
storage.cdrom.cdrw = false (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdplusrdl = false (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusrwdl = false
(bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 7040 (0x1b80) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.write_speeds = {} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1.22' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVD-ROM DVD-105' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0' (string)
storage.partitioning_scheme = ''
(string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.media_size = 46657536 (0x2c7f000) (uint64)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'PIONEER_DVD-ROM_DVD-
105_1E0D377BFC500DA3FW150-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'PIONEER' (string)
udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'}
(string list)
info.category = 'scsi_generic' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface'
(string)
info.subsystem = 'scsi_generic' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_7ab_fc03_1E0D377BFC500DA3FW150_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file =
'/dev/sg1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg1'
(string)
scsi_generic.device = '/dev/sg1' (string)
udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub'
(string)
info.parent = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem
= 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0)
(int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1
(0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/
usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations =
1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 8 (0x8) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2
(0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531
(0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8116'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#3' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8116' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
2' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#3' (string)
pci.product_id = 33046 (0x8116) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8116' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/
usb3' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/
usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8115'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#2' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8115' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
1' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#2' (string)
pci.product_id = 33045 (0x8115) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8115' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/
usb2' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/
usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8114'
info.linux.driver = 'uhci_hcd' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#1' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8114' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.
0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) USB UHCI
#1' (string)
pci.product_id = 33044 (0x8114) (int)
pci.subsys_product_id = 580 (0x244)
(int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
info.linux.driver = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8114' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file =
'/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/
usb1' (string)
usb_device.max_power =
0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0
(12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
info.linux.driver = 'hub' (string)
info.parent =
'/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/
usb_device_1d6b_1_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb'
(string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/
usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206)
(int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0
(0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces
= 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial =
'0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1
(1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_8112'
info.linux.driver = 'pcieport-driver' (string)
info.parent =
'/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
2' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8112' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2)
(int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
1' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
2' (string)
pci.product_id = 33042 (0x8112) (int)
pci.subsys_product_id = 0 (0x0)
(int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_14e4_4315'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_8112' (string)
info.product = 'BCM4310 USB Controller'
(string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4315' (string)
info.vendor = 'Broadcom Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
1/0000:03:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.product = 'BCM4310 USB Controller' (string)
pci.product_id = 17173 (0x4315) (int)
pci.subsys_product_id = 57371 (0xe01b) (int)
pci.subsys_vendor = 'Foxconn International, Inc.' (string)
pci.subsys_vendor_id = 4187 (0x105b) (int)
pci.vendor = 'Broadcom Corporation' (string)
pci.vendor_id = 5348 (0x14e4) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_8110'
info.linux.driver =
'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH Poulsbo) PCI Express
Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8110' (string)
info.vendor = 'Intel Corporation'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) PCI Express Port
1' (string)
pci.product_id = 33040
(0x8110) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id =
32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_10ec_8136'
info.linux.driver = 'r8169' (string)
info.parent =
'/org/freedesktop/Hal/devices/pci_8086_8110' (string)
info.product = 'RTL8101E PCI Express Fast Ethernet
controller' (string)
info.subsystem = 'pci'
(string)
info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string)
info.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
linux.hotplug_type =
2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.
0/0000:02:00.0' (string)
pci.device_class = 2
(0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string)
pci.product = 'RTL8101E PCI Express Fast Ethernet
controller' (string)
pci.product_id =
33078 (0x8136) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133
(0x1025) (int)
pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.vendor_id = 4332 (0x10ec) (int)
udi =
'/org/freedesktop/Hal/devices/net_00_26_9e_64_99_f7'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string
list)
info.category = 'net.80203'
(string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string
list)
info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8136' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/
net_00_26_9e_64_99_f7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string)
net.80203.mac_address =
165866150391 (0x269e6499f7) (uint64)
net.address = '00:26:9e:64:99:f7' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/
pci_10ec_8136' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '',
'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-
system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-
enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names =
{'GetSupported',
'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '',
'b'} (string list)
udi =
'/org/freedesktop/Hal/devices/pci_8086_811b'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo) HD Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_811b' (string)
info.vendor =
'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3)
(int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.
0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) HD Audio
Controller'
(string)
pci.product_id = 33051 (0x811b) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_8086_8108'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo) Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8108' (string)
info.vendor =
'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0)
(int)
pci.linux.sysfs_path = '/sys/devices/
pci0000:00/0000:00:02.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo) Graphics
Controller'
(string)
pci.product_id = 33032 (0x8108) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi =
'/org/freedesktop/Hal/devices/pci_8086_8100'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Controller Hub (SCH
Poulsbo)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_8100' (string)
info.vendor = 'Intel Corporation'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'System Controller Hub (SCH Poulsbo)' (string)
pci.product_id = 33024 (0x8100) (int)
pci.subsys_product_id = 580 (0x244) (int)
pci.subsys_vendor = 'Acer Incorporated [ALI]' (string)
pci.subsys_vendor_id = 4133 (0x1025) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 65 device(s) from the Global Device List.
------------------------------------------------
Arobase40
Feb 27, 2011, 12:56:14 AM2/27/11
to Android-x86
On 26 fév, 21:01, "letscommunicate.co.uk"
<bro...@letscommunicate.co.uk> wrote:
> Right.... had problems withj Ubuntu booting which was odd so used my
> Parted Magic disk.... if this is not what you need let me know and
> I'll look in to the ubunto boot prob..... I think its looking for a
> driver to use the USB DVD I have....
>
> T
Ok, I'll see what I can do.
> Right.... had problems withj Ubuntu booting which was odd so used my
> Parted Magic disk.... if this is not what you need let me know and
> I'll look in to the ubunto boot prob..... I think its looking for a
> driver to use the USB DVD I have....
>
> T
But could you tell me if the display works with my first beta build
for the 1825PT(Z) ?
That way I could add a sub target for the Acer Netbooks series...
letscommunicate.co.uk
Feb 27, 2011, 5:17:25 AM2/27/11
to Android-x86
Ah.... sorry.... thought I had. The answer is no I could only get
android to boot under vesa ..... the too higher resolution options
just hung in the dame way the current live build did.
Tjanls
android to boot under vesa ..... the too higher resolution options
just hung in the dame way the current live build did.
Tjanls
letscommunicate.co.uk
Feb 27, 2011, 5:19:38 AM2/27/11
to Android-x86
Sorry for the bad spellings.... on the phone.....
T
On Feb 27, 10:17 am, "letscommunicate.co.uk"
T
On Feb 27, 10:17 am, "letscommunicate.co.uk"
<bro...@letscommunicate.co.uk> wrote:
> Ah.... sorry.... thought I had. The answer is no I could only get
> android to boot under vesa ..... the too higher resolution options
> just hung in the dame way the current live build did.
>
> Tjanls
>
> On Feb 27, 5:56 am, Arobase40 <arobas...@gmail.com> wrote:
>
>
>
> > On 26 fév, 21:01, "letscommunicate.co.uk"
>
> > <bro...@letscommunicate.co.uk> wrote:
> > > Right.... had bio problems withj Ubuntu booting which was odd so used my
> Ah.... sorry.... thought I had. The answer is no I could only get
> android to boot under vesa ..... the too higher resolution options
> just hung in the dame way the current live build did.
>
> Tjanls
>
> On Feb 27, 5:56 am, Arobase40 <arobas...@gmail.com> wrote:
>
>
>
> > On 26 fév, 21:01, "letscommunicate.co.uk"
>
> > <bro...@letscommunicate.co.uk> wrote:
Arobase40
Feb 27, 2011, 7:57:44 AM2/27/11
to Android-x86
Ok, I have a better idea about this Netbook. This is a really weird
one as it use a dual core Atom CPU with a subset of the GMA500 Poulsbo
GPU.
I think you should use the Viliv build and chance are that both the
display and WiFi will function on your Netbook, at least for the
display I'm quite sure it will and "may be" the WiFi as well.
So please, report me what is working and what not...
On 27 fév, 11:19, "letscommunicate.co.uk"
one as it use a dual core Atom CPU with a subset of the GMA500 Poulsbo
GPU.
I think you should use the Viliv build and chance are that both the
display and WiFi will function on your Netbook, at least for the
display I'm quite sure it will and "may be" the WiFi as well.
So please, report me what is working and what not...
On 27 fév, 11:19, "letscommunicate.co.uk"
letscommunicate.co.uk
Feb 27, 2011, 11:30:11 AM2/27/11
to Android-x86
Mmmmmm - just tried that.... cant get its down as a valid image to
burn :(
T
burn :(
T
letscommunicate.co.uk
Feb 27, 2011, 12:36:55 PM2/27/11
to Android-x86
Got a working test build for the Viliv... the graphics on the animated
android boot logo are currupted and it stops booting at that point...
looks OK just before mind. I am sort of hoping Chih-Wei Huang will add
support for this at some point.... I mean its Atom based as such.
T
On Feb 27, 4:30 pm, "letscommunicate.co.uk"
android boot logo are currupted and it stops booting at that point...
looks OK just before mind. I am sort of hoping Chih-Wei Huang will add
support for this at some point.... I mean its Atom based as such.
T
On Feb 27, 4:30 pm, "letscommunicate.co.uk"
Reply all
Reply to author
Forward
0 new messages