android 3.2 viewpad 10 touch problem

[mmp669]

Hi, Could any one help me with the touch screen please? I get a circle
cursor type and it has terrible delay. I have a novatech ntablet,
basicallya re-badged viewpad.

[Kay Rozen]

Same here. I think vp10 have a cando touch screen as same as s10-3t. the 3.2 iso doesn't have theses drivers. 

[Winner61]

On my vp10 this 3.2 build is very good and does not have any problem
with the touchscreen. If the hardware is the same as an original vp10
there must something wrong with your build. Try flashing again. BT and
G3 are things that don't work. For the rest almost everything works.

[mmp669]

Winner61, I have re-download, re-flash the android x86 3.2 tega v2
many times and always have the same issue.

Could any one kind enough to check their touch screen model please?
Mine is a ilitek multitouch one, not the hanwan one in some of the
viewpda.

Android x86 2.3 tega v2 rom works find though.



On Oct 26, 1:06 am, tabletsx86 <rbg.tablets...@gmail.com> wrote:
> my viewpad10 is exactly as Winner61...everything is fine...

[mmp669]

Thanks tabletsx86.

This explains a lot, I think the android x86 3.2 tega v2 has the
driver for hanvon device but not my ilitek one.

Is there any way that I can load the ilitek driver? I can see the
driver does exist and has been built in Android x86 2.3 tega v2 rom.

Many thanks,


On Nov 11, 4:02 am, tabletsx86 <rbg.tablets...@gmail.com> wrote:
> lsmod | grep "hid"
>
> gives me the hanvon device for hid-multitouch on my vpad10

[Chih-Wei Huang]

Since ICS is released, I can talk more about the details now.

Basically, you need an idc file for the touchscreen to work properly.
That's a feature introduced in honeycomb.
You can just rename the existing idc file in /system/usr/idc
for your device.

2011/11/16 mmp669 <mmp...@gmail.com>:

> This explains a lot, I think the android x86 3.2 tega v2 has the
> driver for hanvon device but not my ilitek one.
>
> Is there any way that I can load the ilitek driver? I can see the
> driver does exist and has been built in Android x86 2.3 tega v2 rom.

--
Chih-Wei
Android-x86 project
http://www.android-x86.org

[mmp669]

Hi Chih-Wei,

Thank you very much for the info, I can finally see some hope.

Could you please give me a more detailed instruction? My knowledge on
linux is very limited.

I have found 4 files under your instruction, but have no idea how to
change them and what to change to.

qwerty.idc
qwerty2.idc
vendor_03eb_product_201c.idc
vendor_20b3_product_0a18.idc

Many thanks in advance.

[Vlad Frolov]

Try use `modprobe hid-multitouch` in android console. I have Asus
T91MT and loading this module enable my touchscreen as big touchpad,
but it's better than no touchscreen at all.

[mmp669]

Thank you Vlad,

I have found that the following instruction and it works fine. Now I
have a usable tablet.

Many thanks to everyone.

ps, http://www.androidtablets.net/forum/viewpad-10/26429-viewsonic-viewpad-10pro-circle-cursor-problem-3-2-fixed.html