android-x86-4.4-r1 & alfa network awus036nh
Marie et Patrick T
Bravo aux créateurs de ce projet
j'ai installé android-x86-4.4-r1 sur un samsung NC10, tout est parfait, sauf la reconnaissance du port usb ou est branché une antenne wifi alfa network awus036nh
avez vous quelques conseils d'installations ?
merci pour votre aide
pstglia
Marie et Patrick T
J'ai installé la Vs 4.4-r2 sans problème (c'était impossible jusqu'alors !) la connexion USB/Wifi Alfa est toujours bloquée.
Pour info lorsque je démarre le NC10 avec le USB/Wifi Alfa connecté à l'ordinateur, l'activation du Wifi Android On/Off est indisponible.
il se rend actif lorsqu’il n'y a pas de connexion USB/Wifi après reboot.
Autre info, la connexion USB/Wifi Alfa marche à merveille sous Ubuntu 14
Merci pour votre aide
pstglia
Merci pour l’intérêt porté à ma demande
J'ai installé la Vs 4.4-r2 sans problème (c'était impossible jusqu'alors !) la connexion USB/Wifi Alfa est toujours bloquée.
Pour info lorsque je démarre le NC10 avec le USB/Wifi Alfa connecté à l'ordinateur, l'activation du Wifi Android On/Off est indisponible.
il se rend actif lorsqu’il n'y a pas de connexion USB/Wifi après reboot.
Autre info, la connexion USB/Wifi Alfa marche à merveille sous Ubuntu 14
Merci pour votre aide
Marie et Patrick T
résultat sudo lsmod sur Ubuntu :
Module Size Used by
hid_generic 12503 0
samsung_laptop 14217 0
snd_hda_codec_realtek 70475 1
snd_hda_codec_generic 62900 1 snd_hda_codec_realtek
snd_hda_intel 29285 3
snd_hda_controller 29252 1 snd_hda_intel
coretemp 13201 0
snd_hda_codec 120371 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 87194 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
arc4 12536 4
snd_seq_midi 13324 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25722 1 snd_seq_midi
joydev 17113 0
serio_raw 13251 0
uvcvideo 71465 0
videobuf2_vmalloc 13048 1 uvcvideo
videobuf2_memops 13170 1 videobuf2_vmalloc
videobuf2_core 48344 1 uvcvideo
v4l2_common 15132 1 videobuf2_core
rt2800usb 26712 0
videodev 131265 3 uvcvideo,v4l2_common,videobuf2_core
rt2x00usb 20041 1 rt2800usb
rt2800lib 83150 1 rt2800usb
media 20899 2 uvcvideo,videodev
ath5k 134997 0
ath 24182 1 ath5k
snd_seq 56592 2 snd_seq_midi_event,snd_seq_midi
rt2x00lib 48886 3 rt2x00usb,rt2800lib,rt2800usb
lpc_ich 16877 0
crc_ccitt 12627 1 rt2800lib
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
bnep 18895 2
usb_serial_simple 13090 0
mac80211 559049 4 ath5k,rt2x00lib,rt2x00usb,rt2800lib
usbhid 47035 0
snd_timer 28648 2 snd_pcm,snd_seq
rfcomm 58045 8
usbserial 38972 1 usb_serial_simple
hid 95946 3 hid_generic,usbhid
btusb 27649 0
cfg80211 418839 4 ath,ath5k,mac80211,rt2x00lib
snd 66670 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
bluetooth 391253 22 bnep,btusb,rfcomm
i915 808682 3
6lowpan_iphc 18262 1 bluetooth
soundcore 14599 2 snd,snd_hda_codec
drm_kms_helper 55007 1 i915
drm 255469 5 i915,drm_kms_helper
i2c_algo_bit 13197 1 i915
shpchp 32143 0
tpm_infineon 16979 0
video 19475 2 i915,samsung_laptop
mac_hid 13059 0
parport_pc 32021 0
ppdev 17391 0
lp 13299 0
parport 40836 3 lp,ppdev,parport_pc
pata_acpi 12901 0
psmouse 91236 0
sky2 52961 0
pstglia
rt2800usb 26712 0
rt2x00lib 48886 3 rt2x00usb,rt2800lib,rt2800usb
Marie et Patrick T
j'ai fait la phase 3)
rien de plus
la commande dmesg/logcat est 'not found'
app dmesg me donne :
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 3.18.0-android-x86+ (cwh...@fw.cwhuang.info) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) ) #1 SMP PREEMPT Thu Jan 1 15:13:43 CST 2015
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] NSC Geode by NSC
<6>[ 0.000000] Cyrix CyrixInstead
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] Transmeta GenuineTMx86
<6>[ 0.000000] Transmeta TransmetaCPU
<6>[ 0.000000] UMC UMC UMC UMC
<4>[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
<6>[ 0.000000] e820: BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-
0x000000000009f7ff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e1fff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000003f6e2000-0x000000003f6e2fff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
<5>[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
<6>[ 0.000000] SMBIOS 2.5 present.
<7>[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD.
NC10 /NC10 , BIOS
11CA.M015.20090908.RHU 09/08/2009
<7>[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000000] e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-BFFFF uncachable
<7>[ 0.000000] C0000-CFFFF write-protect
<7>[ 0.000000] D0000-DFFFF uncachable
<7>[ 0.000000] E0000-FFFFF write-protect
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
<7>[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
<7>[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
<7>[ 0.000000] 3 disabled
<7>[ 0.000000] 4 disabled
<7>[ 0.000000] 5 disabled
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>[ 0.000000] found SMP MP-table at [mem 0x000f7210-0x000f721f] mapped at [c00f7210]
<7>[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
<7>[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
<6>[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
<7>[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
<7>[ 0.000000] [mem 0x37000000-0x373fffff] page 4k
<7>[ 0.000000] BRK [0x018bb000, 0x018bbfff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
<7>[ 0.000000] [mem 0x30000000-0x36ffffff] page 4k
<7>[ 0.000000] BRK [0x018bc000, 0x018bcfff] PGTABLE
<7>[ 0.000000] BRK [0x018bd000, 0x018bdfff] PGTABLE
<7>[ 0.000000] BRK [0x018be000, 0x018befff] PGTABLE
<7>[ 0.000000] BRK [0x018bf000, 0x018bffff] PGTABLE
<7>[ 0.000000] BRK [0x018c0000, 0x018c0fff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
<7>[ 0.000000] [mem 0x00100000-0x2fffffff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
<7>[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
<6>[ 0.000000] RAMDISK: [mem 0x37d54000-0x37ea1fff]
<6>[ 0.000000] Allocated new RAMDISK: [mem 0x376b0000-0x377fd497]
<6>[ 0.000000] Move RAMDISK from [mem 0x37d54000-0x37ea1497] to [mem 0x376b0000-0x377fd497]
<6>[ 0.000000] ACPI: Early table checksum verification disabled
<4>[ 0.000000] ACPI: RSDP 0x000F71E0 000024 (v02 PTLTD )
<4>[ 0.000000] ACPI: XSDT 0x3F6DB5BF 000084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: FACP 0x3F6E1BD2 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
<4>[ 0.000000] ACPI: DSDT 0x3F6DD267 0048F7 (v01 INTEL CALISTGA 06040000 INTL 20050624)
<4>[ 0.000000] ACPI: FACS 0x3F6E2FC0 000040
<4>[ 0.000000] ACPI: APIC 0x3F6E1CC6 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
<4>[ 0.000000] ACPI: HPET 0x3F6E1D2E 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
<4>[ 0.000000] ACPI: MCFG 0x3F6E1D66 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
<4>[ 0.000000] ACPI: TCPA 0x3F6E1DA2 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
<4>[ 0.000000] ACPI: TMOR 0x3F6E1DD4 000026 (v01 PTLTD 06040000 PTL 00000003)
<4>[ 0.000000] ACPI: APIC 0x3F6E1DFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: BOOT 0x3F6E1E62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
<4>[ 0.000000] ACPI: SLIC 0x3F6E1E8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: SSDT 0x3F6DCC18 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
<4>[ 0.000000] ACPI: SSDT 0x3F6DC57C 00069C (v01 SataRe SataSec 00001000 INTL 20050624)
<4>[ 0.000000] ACPI: SSDT 0x3F6DB643 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
<4>[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
<4>[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux...@vger.kernel.org
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<5>[ 0.000000] 126MB HIGHMEM available.
<5>[ 0.000000] 887MB LOWMEM available.
<6>[ 0.000000] mapped low ram: 0 - 377fe000
<6>[ 0.000000] low ram: 0 - 377fe000
<4>[ 0.000000] Zone ranges:
<4>[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
<4>[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
<4>[ 0.000000] HighMem [mem 0x377fe000-0x3f6cffff]
<4>[ 0.000000] Movable zone start for each node
<4>[ 0.000000] Early memory node ranges
<4>[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
<4>[ 0.000000] node 0: [mem 0x00100000-0x3f6cffff]
<6>[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x3f6cffff]
<7>[ 0.000000] On node 0 totalpages: 259694
<7>[ 0.000000] free_area_init_node: node 0, pgdat c1789940, node_mem_map f6b3f020
<7>[ 0.000000] DMA zone: 32 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 1744 pages used for memmap
<7>[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 254 pages used for memmap
<7>[ 0.000000] HighMem zone: 32466 pages, LIFO batch:7
<6>[ 0.000000] Using APIC driver default
<6>[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
<6>[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
<6>[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
<6>[ 0.000000] PERCPU: Embedded 15 pages/cpu @f768b000 s32640 r0 d28800 u61440
<7>[ 0.000000] pcpu-alloc: s32640 r0 d28800 u61440 alloc=15*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257918
<5>[ 0.000000] Kernel command line: BOOT_IMAGE=/android-4.4-r2/kernel quiet root=/dev/ramO androidboot.hardware=android_x86 SRC=/android-4.4-r2
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Initializing CPU#0
<6>[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
<6>[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
<4>[ 0.000000] Memory: 1018504K/1038776K available (4786K
kernel code, 449K rwdata, 2592K rodata, 532K init, 512K bss, 20272K
reserved, 129864K highmem)
<6>[ 0.000000] virtual kernel memory layout:
<6>[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
<6>[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<6>[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
<6>[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
<6>[ 0.000000] .init : 0xc17a8000 - 0xc182d000 ( 532 kB)
<6>[ 0.000000] .data : 0xc14accf9 - 0xc17a6440 (3045 kB)
<6>[ 0.000000] .text : 0xc1000000 - 0xc14accf9 (4787 kB)
<6>[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
<6>[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:2304 nr_irqs:440 0
<7>[ 0.000000] CPU 0 irqstacks, hard=f6406000 soft=f6408000
<6>[ 0.000000] Offload RCU callbacks from all CPUs
<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
<6>[ 0.000000] Console: colour VGA+ 80x25
<6>[ 0.000000] console [tty0] enabled
<7>[ 0.000000] hpet clockevent registered
<6>[ 0.000000] tsc: Fast TSC calibration using PIT
<6>[ 0.000000] tsc: Detected 1596.078 MHz processor
<6>[ 0.001004] Calibrating delay loop (skipped), value
calculated using timer frequency.. 3192.15 BogoMIPS (lpj=1596078)
<6>[ 0.001011] pid_max: default: 32768 minimum: 301
<6>[ 0.001040] ACPI: Core revision 20140926
<4>[ 0.010392] ACPI: All ACPI Tables successfully acquired
<6>[ 0.011108] Security Framework initialized
<6>[ 0.011150] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.011157] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.012252] Initializing cgroup subsys freezer
<6>[ 0.012262] Initializing cgroup subsys debug
<4>[ 0.012302] Atom PSE erratum detected, BIOS microcode update recommended
<6>[ 0.012308] CPU: Physical Processor ID: 0
<6>[ 0.012311] CPU: Processor Core ID: 0
<6>[ 0.012319] mce: CPU supports 5 MCE banks
<6>[ 0.012333] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.012350] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
<6>[ 0.012350] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
<6>[ 0.012507] Freeing SMP alternatives memory: 24K (c182d000 - c1833000)
<6>[ 0.012623] Enabling APIC mode: Flat. Using 1 I/O APICs
<6>[ 0.013158] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.023175] smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
<6>[ 0.024000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
<6>[ 0.024000] ... version: 3
<6>[ 0.024000] ... bit width: 40
<6>[ 0.024000] ... generic registers: 2
<6>[ 0.024000] ... value mask: 000000ffffffffff
<6>[ 0.024000] ... max period: 000000007fffffff
<6>[ 0.024000] ... fixed-purpose events: 3
<6>[ 0.024000] ... event mask: 0000000700000003
<7>[ 0.032329] CPU 1 irqstacks, hard=f6510000 soft=f6512000
<6>[ 0.032335] x86: Booting SMP configuration:
<6>[ 0.032340] .... node #0, CPUs: #1
<6>[ 0.002000] Initializing CPU#1
<4>[ 0.002000] Atom PSE erratum detected, BIOS microcode update recommended
<6>[ 0.044296] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
<6>[ 0.044334] x86: Booted up 1 node, 2 CPUs
<6>[ 0.044340] smpboot: Total of 2 processors activated (6384.31 BogoMIPS)
<6>[ 0.046284] PM: Registering ACPI NVS region [mem 0x3f6e2000-0x3f6e2fff] (4096 bytes)
<6>[ 0.047055] pinctrl core: initialized pinctrl subsystem
<6>[ 0.047430] regulator-dummy: no parameters
<6>[ 0.047538] RTC time: 11:10:02, date: 05/11/15
<6>[ 0.047894] NET: Registered protocol family 16
<6>[ 0.052022] cpuidle: using governor ladder
<6>[ 0.061017] cpuidle: using governor menu
<6>[ 0.061236] ACPI: bus type PCI registered
<6>[ 0.061242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.062081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
<6>[ 0.062081] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
<6>[ 0.062115] PCI: Using MMCONFIG for extended config space
<6>[ 0.062115] PCI: Using configuration type 1 for base access
<6>[ 0.080294] ACPI: Added _OSI(Module Device)
<6>[ 0.080302] ACPI: Added _OSI(Processor Device)
<6>[ 0.080307] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.080312] ACPI: Added _OSI(Processor Aggregator Device)
<5>[ 0.087576] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
<4>[ 0.090080] ACPI: Dynamic OEM Table Load:
<4>[ 0.090080] ACPI: SSDT 0xF66A2400 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
<4>[ 0.090620] ACPI: Dynamic OEM Table Load:
<4>[ 0.090637] ACPI: SSDT 0xF677A800 0006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
<4>[ 0.092460] ACPI: Dynamic OEM Table Load:
<4>[ 0.092460] ACPI: SSDT 0xF6583D00 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
<4>[ 0.092940] ACPI: Dynamic OEM Table Load:
<4>[ 0.092951] ACPI: SSDT 0xF669A280 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
<6>[ 0.094809] ACPI: Interpreter enabled
<4>[ 0.094809] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
<4>[ 0.095142] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
<6>[ 0.095142] ACPI: (supports S0 S3 S5)
<6>[ 0.095142] ACPI: Using IOAPIC for interrupt routing
<6>[ 0.095170] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 0.110150] ACPI: Power Resource [FN00] (off)
<6>[ 0.111699] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<6>[ 0.111719] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<6>[ 0.111736] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
<6>[ 0.113583] PCI host bridge to bus 0000:00
<6>[ 0.113596] pci_bus 0000:00: root bus resource [bus 00-ff]
<6>[ 0.113604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
<6>[ 0.113611] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
<6>[ 0.113618] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
<6>[ 0.113624] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
<6>[ 0.113631] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
<6>[ 0.113638] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
<6>[ 0.113645] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
<7>[ 0.113666] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
<7>[ 0.114005] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
<7>[ 0.114005] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf007ffff]
<7>[ 0.114005] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
<7>[ 0.114005] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
<7>[ 0.114005] pci 0000:00:02.0: reg 0x1c: [mem 0xf0300000-0xf033ffff]
<7>[ 0.114264] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
<7>[ 0.114282] pci 0000:00:02.1: reg 0x10: [mem 0xf0080000-0xf00fffff]
<7>[ 0.115097] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
<7>[ 0.115097] pci 0000:00:1b.0: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
<7>[ 0.115097] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[ 0.115097] pci 0000:00:1b.0: System wakeup disabled by ACPI
<7>[ 0.115128] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
<7>[ 0.115271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<7>[ 0.115541] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
<7>[ 0.115708] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
<7>[ 0.116064] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
<7>[ 0.116064] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
<7>[ 0.116313] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
<7>[ 0.116388] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
<7>[ 0.117117] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
<7>[ 0.117117] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
<7>[ 0.117117] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
<7>[ 0.117117] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
<7>[ 0.117392] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
<7>[ 0.117428] pci 0000:00:1d.7: reg 0x10: [mem 0xf0544000-0xf05443ff]
<7>[ 0.117576] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<7>[ 0.118004] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
<7>[ 0.118166] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
<6>[ 0.118300] pci 0000:00:1f.0: can't claim BAR 7 [io
0x1000-0x107f]: address conflict with ACPI CPU throttle [io
0x1010-0x1015]
<6>[ 0.118313] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
<7>[ 0.119097] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
<7>[ 0.119177] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
<7>[ 0.119177] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
<7>[ 0.119177] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
<7>[ 0.119177] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
<7>[ 0.119177] pci 0000:00:1f.2: reg 0x20: [io 0x1810-0x181f]
<6>[ 0.119177] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
<6>[ 0.119177] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
<6>[ 0.119177] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
<6>[ 0.119177] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
<7>[ 0.119177] pci 0000:00:1f.2: PME# supported from D3hot
<7>[ 0.119207] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
<7>[ 0.119217] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
<7>[ 0.120005] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
<7>[ 0.120005] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff 64bit]
<7>[ 0.120005] pci 0000:02:00.0: PME# supported from D3hot
<6>[ 0.120017] pci 0000:02:00.0: System wakeup disabled by ACPI
<6>[ 0.120175] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>[ 0.120197] pci 0000:00:1c.0: PCI bridge to [bus 02]
<7>[ 0.120212] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
<7>[ 0.121042] pci 0000:03:00.0: [11ab:4354] type 00 class 0x020000
<7>[ 0.121223] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
<7>[ 0.121223] pci 0000:03:00.0: reg 0x18: [io 0x2000-0x20ff]
<7>[ 0.121678] pci 0000:03:00.0: supports D1 D2
<7>[ 0.121688] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 0.121848] pci 0000:03:00.0: System wakeup disabled by ACPI
<6>[ 0.124098] pci 0000:00:1c.2: PCI bridge to [bus 03]
<7>[ 0.124112] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
<7>[ 0.124123] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
<6>[ 0.124427] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
<7>[ 0.124449] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
<7>[ 0.124457] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
<7>[ 0.124469] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[ 0.124476] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
<7>[ 0.125022] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
<7>[ 0.125033] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
<7>[ 0.125043] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
<7>[ 0.125108] pci_bus 0000:00: on NUMA node 0
<6>[ 0.125451] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
<6>[ 0.125619] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
<6>[ 0.125775] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
<6>[ 0.125929] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
<6>[ 0.126103] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
<6>[ 0.126260] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
<6>[ 0.126415] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
<6>[ 0.126600] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
<4>[ 0.129016] ACPI: Enabled 1 GPEs in block 00 to 1F
<6>[ 0.129107] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
<6>[ 0.129169] ACPI : EC: 0 stale EC events cleared
<6>[ 0.130285] vgaarb: setting as boot device: PCI:0000:00:02.0
<6>[ 0.130295] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
<6>[ 0.130345] vgaarb: loaded
<6>[ 0.130353] vgaarb: bridge control possible 0000:00:02.0
<5>[ 0.132000] SCSI subsystem initialized
<7>[ 0.132283] libata version 3.00 loaded.
<6>[ 0.132323] ACPI: bus type USB registered
<6>[ 0.132498] usbcore: registered new interface driver usbfs
<6>[ 0.133050] usbcore: registered new interface driver hub
<6>[ 0.133050] usbcore: registered new device driver usb
<6>[ 0.133469] media: Linux media interface: v0.10
<6>[ 0.134008] Linux video capture interface: v2.00
<6>[ 0.135075] PCI: Using ACPI for IRQ routing
<7>[ 0.148141] PCI: pci_cache_line_size set to 64 bytes
<7>[ 0.148296] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
<7>[ 0.148303] e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
<6>[ 0.149342] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[ 0.149356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>[ 0.149367] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
<6>[ 0.152035] Switched to clocksource hpet
<6>[ 0.161866] pnp: PnP ACPI init
<6>[ 0.162285] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
<6>[ 0.162300] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
<6>[ 0.162311] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
<6>[ 0.162322] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
<6>[ 0.162334] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>[ 0.162346] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>[ 0.162358] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
<6>[ 0.162368] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
<7>[ 0.162380] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 0.163361] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
<7>[ 0.163377] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
<6>[ 0.163580] system 00:02: [io 0x0680-0x069f] has been reserved
<6>[ 0.163594] system 00:02: [io 0x0800-0x080f] has been reserved
<6>[ 0.163606] system 00:02: [io 0x1000-0x107f] could not be reserved
<6>[ 0.163618] system 00:02: [io 0x1180-0x11bf] has been reserved
<6>[ 0.163630] system 00:02: [io 0x1640-0x164f] has been reserved
<7>[ 0.163643] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 0.163851] system 00:03: [io 0x06a0-0x06af] has been reserved
<6>[ 0.163863] system 00:03: [io 0x06b0-0x06ff] has been reserved
<7>[ 0.163877] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.164053] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[ 0.164253] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[ 0.164395] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<6>[ 0.164708] pnp: PnP ACPI: found 7 devices
<6>[ 0.164728] PnPBIOS: Disabled by ACPI PNP
<7>[ 0.205172] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
<7>[ 0.205185] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
<7>[ 0.205206] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
<4>[ 0.205232] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
<7>[ 0.205241] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
<7>[ 0.205249] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
<7>[ 0.205256] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
<6>[ 0.205276] pci 0000:00:1c.0: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
<6>[ 0.205288] pci 0000:00:1c.2: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]
<6>[ 0.205300] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
<6>[ 0.205308] pci 0000:00:1c.0: PCI bridge to [bus 02]
<6>[ 0.205316] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.205328] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
<6>[ 0.205338] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
<6>[ 0.205351] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 0.205358] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
<6>[ 0.205370] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
<6>[ 0.205380] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
<6>[ 0.205393] pci 0000:00:1e.0: PCI bridge to [bus 04]
<7>[ 0.205416] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
<7>[ 0.205423] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
<7>[ 0.205429] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
<7>[ 0.205436] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
<7>[ 0.205442] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
<7>[ 0.205449] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
<7>[ 0.205456] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
<7>[ 0.205463] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
<7>[ 0.205469] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
<7>[ 0.205476] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
<7>[ 0.205483] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
<7>[ 0.205489] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
<7>[ 0.205496] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
<7>[ 0.205503] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
<7>[ 0.205510] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
<7>[ 0.205516] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
<7>[ 0.205523] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
<7>[ 0.205530] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
<7>[ 0.205536] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
<7>[ 0.205543] pci_bus 0000:04: resource 10 [mem 0x40000000-0xfebfffff]
<6>[ 0.205646] NET: Registered protocol family 2
<6>[ 0.206117] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.206161] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.206222] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.206314] TCP: reno registered
<6>[ 0.206322] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.206341] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.206479] NET: Registered protocol family 1
<7>[ 0.206528] pci 0000:00:02.0: Video device with shadowed ROM
<7>[ 0.209114] PCI: CLS 64 bytes, default 64
<6>[ 0.209294] Trying to unpack rootfs image as initramfs...
<6>[ 0.272575] Freeing initrd memory: 1336K (f76b0000 - f77fe000)
<6>[ 0.272768] Simple Boot Flag at 0x36 set to 0x1
<6>[ 0.273329] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
<6>[ 0.273362] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
<6>[ 0.273490] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba
<6>[ 0.275513] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[ 0.276513] VFS: Disk quotas dquot_6.5.2
<4>[ 0.276578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.276927] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.277043] fuse init (API version 7.23)
<6>[ 0.277216] msgmni has been set to 1738
<6>[ 0.278673] bounce: pool size: 64 pages
<6>[ 0.278683] io scheduler noop registered
<6>[ 0.278691] io scheduler deadline registered
<6>[ 0.278738] io scheduler cfq registered (default)
<7>[ 0.279582] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
<7>[ 0.280071] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
<6>[ 0.280436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<7>[ 0.280628] intel_idle: MWAIT substates: 0x20220
<7>[ 0.280648] intel_idle: v0.4 model 0x1C
<7>[ 0.280652] intel_idle: lapic_timer_reliable_states 0x2
<6>[ 0.280664] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
<7>[ 0.281397] power_supply ADP1: uevent
<7>[ 0.281405] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
<7>[ 0.281625] power_supply ADP1: prop ONLINE=1
<7>[ 0.281661] power_supply ADP1: power_supply_changed
<6>[ 0.281679] ACPI: AC Adapter [ADP1] (on-line)
<6>[ 0.282059] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
<6>[ 0.282118] ACPI: Lid Switch [LID0]
<6>[ 0.282320] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
<6>[ 0.282335] ACPI: Power Button [PWRB]
<6>[ 0.282553] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
<6>[ 0.282565] ACPI: Sleep Button [SLPB]
<6>[ 0.282768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>[ 0.282779] ACPI: Power Button [PWRF]
<6>[ 0.283654] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
<7>[ 0.284363] power_supply ADP1: power_supply_changed_work
<7>[ 0.284663] power_supply ADP1: power_supply_update_gen_leds 1
<7>[ 0.284695] power_supply ADP1: uevent
<7>[ 0.284705] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
<7>[ 0.284991] power_supply ADP1: prop ONLINE=1
<6>[ 0.287380] acpi device:03: registered as cooling_device1
<6>[ 0.287651] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
<6>[ 0.289893] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 0.289902] ACPI: Thermal Zone [TZ00] (46 C)
<6>[ 0.290199] isapnp: Scanning for PnP cards...
<7>[ 0.292714] power_supply BAT1: uevent
<7>[ 0.292724] power_supply BAT1: POWER_SUPPLY_NAME=BAT1
<7>[ 0.294903] power_supply BAT1: prop STATUS=Full
<7>[ 0.294918] power_supply BAT1: prop PRESENT=1
<7>[ 0.294929] power_supply BAT1: prop TECHNOLOGY=Li-ion
<7>[ 0.294939] power_supply BAT1: prop CYCLE_COUNT=0
<7>[ 0.294949] power_supply BAT1: prop VOLTAGE_MIN_DESIGN=11100000
<7>[ 0.294959] power_supply BAT1: prop VOLTAGE_NOW=12481000
<7>[ 0.294970] power_supply BAT1: prop CURRENT_NOW=0
<7>[ 0.294980] power_supply BAT1: prop CHARGE_FULL_DESIGN=5200000
<7>[ 0.294990] power_supply BAT1: prop CHARGE_FULL=4200000
<7>[ 0.295001] power_supply BAT1: prop CHARGE_NOW=4200000
<7>[ 0.295034] power_supply BAT1: prop CAPACITY=100
<7>[ 0.295044] power_supply BAT1: prop CAPACITY_LEVEL=Full
<7>[ 0.295054] power_supply BAT1: prop MODEL_NAME=
<7>[ 0.295064] power_supply BAT1: prop MANUFACTURER=SAMSUNG Electronics
<7>[ 0.295074] power_supply BAT1: prop SERIAL_NUMBER=
<7>[ 0.295111] power_supply BAT1: power_supply_changed
<6>[ 0.295139] ACPI: Battery Slot [BAT1] (battery present)
<7>[ 0.295275] power_supply BAT1: power_supply_changed_work
<7>[ 0.295286] power_supply BAT1: power_supply_update_bat_leds 4
<7>[ 0.295311] power_supply BAT1: uevent
<7>[ 0.295319] power_supply BAT1: POWER_SUPPLY_NAME=BAT1
<7>[ 0.295334] power_supply BAT1: prop STATUS=Full
<7>[ 0.295344] power_supply BAT1: prop PRESENT=1
<7>[ 0.295354] power_supply BAT1: prop TECHNOLOGY=Li-ion
<7>[ 0.295364] power_supply BAT1: prop CYCLE_COUNT=0
<7>[ 0.295374] power_supply BAT1: prop VOLTAGE_MIN_DESIGN=11100000
<7>[ 0.295384] power_supply BAT1: prop VOLTAGE_NOW=12481000
<7>[ 0.295394] power_supply BAT1: prop CURRENT_NOW=0
<7>[ 0.295405] power_supply BAT1: prop CHARGE_FULL_DESIGN=5200000
<7>[ 0.295415] power_supply BAT1: prop CHARGE_FULL=4200000
<7>[ 0.295425] power_supply BAT1: prop CHARGE_NOW=4200000
<7>[ 0.295435] power_supply BAT1: prop CAPACITY=100
<7>[ 0.295445] power_supply BAT1: prop CAPACITY_LEVEL=Full
<7>[ 0.295454] power_supply BAT1: prop MODEL_NAME=
<7>[ 0.295464] power_supply BAT1: prop MANUFACTURER=SAMSUNG Electronics
<7>[ 0.295474] power_supply BAT1: prop SERIAL_NUMBER=
<6>[ 0.646937] isapnp: No Plug & Play device found
<6>[ 0.653441] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[ 0.654835] Linux agpgart interface v0.103
<6>[ 0.654914] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
<6>[ 0.654951] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
<6>[ 0.655121] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
<6>[ 0.655354] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
<6>[ 0.660443] brd: module loaded
<6>[ 0.662958] loop: module loaded
<6>[ 0.663123] hv_vmbus: registering driver hv_storvsc
<7>[ 0.663526] ata_piix 0000:00:1f.2: version 2.13
<6>[ 0.663840] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
<6>[ 0.817039] scsi host0: ata_piix
<6>[ 0.817415] scsi host1: ata_piix
<6>[ 0.817646] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
<6>[ 0.817655] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
<6>[ 0.818469] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.818475] tun: (C) 1999-2004 Max Krasnyansky <ma...@qualcomm.com>
<6>[ 0.818555] PPP generic driver version 2.4.2
<6>[ 0.818670] PPP BSD Compression module registered
<6>[ 0.818678] PPP Deflate Compression module registered
<6>[ 0.818692] PPP MPPE Compression module registered
<6>[ 0.818704] NET: Registered protocol family 24
<6>[ 0.818907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.818922] ehci-pci: EHCI PCI platform driver
<6>[ 0.819340] ehci-pci 0000:00:1d.7: EHCI Host Controller
<6>[ 0.819464] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
<6>[ 0.819493] ehci-pci 0000:00:1d.7: debug port 1
<7>[ 0.821134] ata2: port disabled--ignoring
<7>[ 0.823451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
<6>[ 0.823505] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0544000
<6>[ 0.829043] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[ 0.829341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.829349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.829356] usb usb1: Product: EHCI Host Controller
<6>[ 0.829362] usb usb1: Manufacturer: Linux 3.18.0-android-x86+ ehci_hcd
<6>[ 0.829367] usb usb1: SerialNumber: 0000:00:1d.7
<6>[ 0.829815] hub 1-0:1.0: USB hub found
<6>[ 0.829856] hub 1-0:1.0: 8 ports detected
<6>[ 0.831295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.831325] ohci-pci: OHCI PCI platform driver
<6>[ 0.831394] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 0.831740] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[ 0.831852] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>[ 0.831870] uhci_hcd 0000:00:1d.0: detected 2 ports
<6>[ 0.831909] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
<6>[ 0.832151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.832159] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.832165] usb usb2: Product: UHCI Host Controller
<6>[ 0.832172] usb usb2: Manufacturer: Linux 3.18.0-android-x86+ uhci_hcd
<6>[ 0.832177] usb usb2: SerialNumber: 0000:00:1d.0
<6>[ 0.832536] hub 2-0:1.0: USB hub found
<6>[ 0.832563] hub 2-0:1.0: 2 ports detected
<6>[ 0.833231] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[ 0.833352] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>[ 0.833372] uhci_hcd 0000:00:1d.1: detected 2 ports
<6>[ 0.833442] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
<6>[ 0.833620] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.833628] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.833634] usb usb3: Product: UHCI Host Controller
<6>[ 0.833640] usb usb3: Manufacturer: Linux 3.18.0-android-x86+ uhci_hcd
<6>[ 0.833646] usb usb3: SerialNumber: 0000:00:1d.1
<6>[ 0.834049] hub 3-0:1.0: USB hub found
<6>[ 0.834075] hub 3-0:1.0: 2 ports detected
<6>[ 0.834702] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[ 0.834824] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>[ 0.834848] uhci_hcd 0000:00:1d.2: detected 2 ports
<6>[ 0.834915] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
<6>[ 0.835105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.835113] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.835119] usb usb4: Product: UHCI Host Controller
<6>[ 0.835125] usb usb4: Manufacturer: Linux 3.18.0-android-x86+ uhci_hcd
<6>[ 0.835130] usb usb4: SerialNumber: 0000:00:1d.2
<6>[ 0.835484] hub 4-0:1.0: USB hub found
<6>[ 0.835509] hub 4-0:1.0: 2 ports detected
<6>[ 0.836281] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[ 0.836412] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>[ 0.836433] uhci_hcd 0000:00:1d.3: detected 2 ports
<6>[ 0.836498] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
<6>[ 0.836667] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.836674] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.836681] usb usb5: Product: UHCI Host Controller
<6>[ 0.836687] usb usb5: Manufacturer: Linux 3.18.0-android-x86+ uhci_hcd
<6>[ 0.836692] usb usb5: SerialNumber: 0000:00:1d.3
<6>[ 0.837107] hub 5-0:1.0: USB hub found
<6>[ 0.837136] hub 5-0:1.0: 2 ports detected
<6>[ 0.837859] usbcore: registered new interface driver usb-storage
<6>[ 0.837917] usbcore: registered new interface driver ums-alauda
<6>[ 0.837975] usbcore: registered new interface driver ums-cypress
<6>[ 0.838060] usbcore: registered new interface driver ums-datafab
<6>[ 0.838120] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.838176] usbcore: registered new interface driver ums-freecom
<6>[ 0.838233] usbcore: registered new interface driver ums-isd200
<6>[ 0.838292] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.838347] usbcore: registered new interface driver ums-onetouch
<6>[ 0.838411] usbcore: registered new interface driver ums-realtek
<6>[ 0.838465] usbcore: registered new interface driver ums-sddr09
<6>[ 0.838519] usbcore: registered new interface driver ums-sddr55
<6>[ 0.838573] usbcore: registered new interface driver ums-usbat
<6>[ 0.838736] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>[ 0.840858] i8042: Detected active multiplexing controller, rev 1.1
<6>[ 0.842363] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 0.842488] serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>[ 0.842599] serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>[ 0.842714] serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>[ 0.842824] serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>[ 0.843154] hv_vmbus: registering driver hyperv_keyboard
<6>[ 0.843348] mousedev: PS/2 mouse device common for all mice
<6>[ 0.844001] rtc_cmos 00:04: RTC can wake from S4
<7>[ 0.844163] rtc (null): alarm rollover: day
<7>[ 0.844294] rtc rtc0: rtc_cmos: dev (254:0)
<6>[ 0.844325] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>[ 0.844379] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
<6>[ 0.844565] IR Sharp protocol handler initialized
<6>[ 0.844578] IR XMP protocol handler initialized
<6>[ 0.844685] device-mapper: uevent: version 1.0.3
<6>[ 0.844811] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-d...@redhat.com
<6>[ 0.845102] sdhci: Secure Digital Host Controller Interface driver
<6>[ 0.845110] sdhci: Copyright(c) Pierre Ossman
<6>[ 0.845276] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 0.846368] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 0.846609] usbcore: registered new interface driver usbhid
<6>[ 0.846615] usbhid: USB HID core driver
<6>[ 0.846947] ashmem: initialized
<6>[ 0.847091] logger: created 256K log 'log_main'
<6>[ 0.847196] logger: created 256K log 'log_events'
<6>[ 0.847300] logger: created 256K log 'log_radio'
<6>[ 0.847403] logger: created 256K log 'log_system'
<6>[ 0.847666] oprofile: using NMI interrupt.
<6>[ 0.847715] GACT probability NOT on
<6>[ 0.847729] Mirror/redirect action on
<6>[ 0.847746] u32 classifier
<6>[ 0.847750] Actions configured
<6>[ 0.847763] Netfilter messages via NETLINK v0.30.
<6>[ 0.847813] nf_conntrack version 0.5.0 (15935 buckets, 63740 max)
<6>[ 0.848225] ctnetlink v0.93: registering with nfnetlink.
<6>[ 0.848631] xt_time: kernel timezone is -0000
<6>[ 0.848905] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.849048] arp_tables: (C) 2002 David S. Miller
<6>[ 0.849084] TCP: cubic registered
<6>[ 0.849092] Initializing XFRM netlink socket
<6>[ 0.849218] NET: Registered protocol family 10
<6>[ 0.849842] mip6: Mobile IPv6
<6>[ 0.849870] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.850062] sit: IPv6 over IPv4 tunneling driver
<6>[ 0.851060] NET: Registered protocol family 17
<6>[ 0.851097] NET: Registered protocol family 15
<6>[ 0.851129] NET: Registered protocol family 35
<6>[ 0.851768] Using IPI No-Shortcut mode
<6>[ 0.852226] registered taskstats version 1
<6>[ 0.853125] Magic number: 15:600:175
<6>[ 0.853144] misc network_throughput: hash matches
<6>[ 0.853316] acpi device:0b: hash matches
<6>[ 0.853409] rtc_cmos 00:04: setting system clock to 2015-05-11 11:10:02 UTC (1431342602)
<6>[ 0.971431] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100
<6>[ 0.971442] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>[ 0.977361] ata1.00: configured for UDMA/100
<5>[ 0.977648] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0009 PQ: 0 ANSI: 5
<5>[ 0.978565] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
<5>[ 0.978568] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 0.978896] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 0.978907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 0.979036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 0.980098] sda: sda1 sda2 sda3 sda4
<5>[ 0.981298] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 0.981678] Freeing unused kernel memory: 532K (c17a8000 - c182d000)
<5>[ 1.084283] random: env urandom read with 13 bits of entropy available
<3>[ 1.119746] VFS: could not find a valid V7 on sda.
<3>[ 1.152055] VFS: could not find a valid V7 on sda1.
<3>[ 1.276966] VFS: could not find a valid V7 on sda2.
<6>[ 1.305183] usb 3-2: new full-speed USB device number 2 using uhci_hcd
<6>[ 1.468123] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2101
<6>[ 1.468137] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 1.468146] usb 3-2: Product: BCM92045NMD
<6>[ 1.468154] usb 3-2: Manufacturer: Broadcom Corp
<6>[ 1.468162] usb 3-2: SerialNumber: 002119316C52
<3>[ 1.566640] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
<3>[ 1.567218] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
<6>[ 1.584436] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 1.628352] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
<3>[ 1.629121] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
<6>[ 1.649046] EXT4-fs (sda4): orphan cleanup on readonly fs
<6>[ 1.667374] EXT4-fs (sda4): 1 orphan inode deleted
<6>[ 1.667391] EXT4-fs (sda4): recovery complete
<6>[ 1.748000] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 1.758138] usb 4-1: new full-speed USB device number 2 using uhci_hcd
<6>[ 1.858248] EXT4-fs (sda4): re-mounted. Opts: (null)
<6>[ 1.888191] usb 1-8: new high-speed USB device number 5 using ehci-pci
<5>[ 1.888897] random: nonblocking pool is initialized
<6>[ 1.915193] usb 4-1: New USB device found, idVendor=0fcf, idProduct=1009
<6>[ 1.915213] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 1.915226] usb 4-1: Product: ANT USB-m Stick
<6>[ 1.915238] usb 4-1: Manufacturer: Dynastream Innovations
<6>[ 1.915249] usb 4-1: SerialNumber: 190
<6>[ 2.023092] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c326
<6>[ 2.023105] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 2.023114] usb 1-8: Product: Namuga 1.3M Webcam
<6>[ 2.023122] usb 1-8: Manufacturer: Vimicro Corp.
<6>[ 2.128070] usb 4-2: new full-speed USB device number 3 using uhci_hcd
<6>[ 2.298146] usb 4-2: New USB device found, idVendor=046d, idProduct=c52f
<6>[ 2.298157] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 2.298164] usb 4-2: Product: USB Receiver
<6>[ 2.298170] usb 4-2: Manufacturer: Logitech
<6>[ 2.307656] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C52F.0001/input/input5
<6>[ 2.308074] hid-generic 0003:046D:C52F.0001: input,hidraw0:
USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
<6>[ 2.314648] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:046D:C52F.0002/input/input6
<6>[ 2.315151] hid-generic 0003:046D:C52F.0002:
input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1d.2-2/input1
<6>[ 3.342548] [drm] Initialized drm 1.1.0 20060810
<6>[ 3.371381] [drm] Memory usable by graphics device = 256M
<6>[ 3.371393] [drm] Replacing VGA console driver
<6>[ 3.374089] Console: switching to colour dummy device 80x25
<6>[ 3.375366] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[ 3.375375] [drm] Driver supports precise vblank timestamp query.
<6>[ 3.375625] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
<6>[ 3.401179] [drm] initialized overlay support
<6>[ 3.401282] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
<6>[ 3.418457] fbcon: inteldrmfb (fb0) is primary device
<6>[ 4.165213] Console: switching to colour frame buffer device 128x37
<6>[ 4.178875] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
<6>[ 4.178882] i915 0000:00:02.0: registered panic notifier
<7>[ 4.289595] snd_hda_intel 0000:00:1b.0: irq 26 for MSI/MSI-X
<6>[ 4.334977] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 4.357645] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
<6>[ 4.357658] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6>[ 4.357669] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
<6>[ 4.357677] sound hdaudioC0D0: mono: mono_out=0x0
<6>[ 4.357684] sound hdaudioC0D0: inputs:
<6>[ 4.357694] sound hdaudioC0D0: Internal Mic=0x19
<6>[ 4.357703] sound hdaudioC0D0: Mic=0x18
<6>[ 4.368050] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
<6>[ 4.368445] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
<0>[ 4.479179] ACPI Warning: SystemIO range
0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f
(\PMIO) (20140926/utaddress-258)
<6>[ 4.479224] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<0>[ 4.479244] ACPI Warning: SystemIO range
0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb
(\GPIO) (20140926/utaddress-258)
<6>[ 4.479279] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<0>[ 4.479293] ACPI Warning: SystemIO range
0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb
(\GPIO) (20140926/utaddress-258)
<6>[ 4.479325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 4.479338] lpc_ich: Resource conflict(s) found affecting gpio_ich
<0>[ 4.508841] ACPI Warning: SystemIO range
0x000018a0-0x000018bf conflicts with OpRegion 0x000018a0-0x000018af
(\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
<6>[ 4.508867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<6>[ 4.549212] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 4.611384] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
<6>[ 4.611714] ath5k 0000:02:00.0: registered as 'phy0'
<7>[ 5.135055] ath: EEPROM regdomain: 0x65
<7>[ 5.135063] ath: EEPROM indicates we should expect a direct regpair map
<7>[ 5.135072] ath: Country alpha2 being used: 00
<7>[ 5.135076] ath: Regpair used: 0x65
<7>[ 5.135576] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 5.136899] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
<6>[ 5.165740] sky2: driver version 1.30
<6>[ 5.166330] sky2 0000:03:00.0: Yukon-2 FE+ chip revision 0
<7>[ 5.166703] sky2 0000:03:00.0: irq 27 for MSI/MSI-X
<6>[ 5.168204] sky2 0000:03:00.0 eth0: addr 00:13:77:ad:ad:60
<6>[ 5.336696] input: PC Speaker as /devices/platform/pcspkr/input/input9
<6>[ 5.425389] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input10
<6>[ 5.512957] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326)
<6>[ 5.516007] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input14
<6>[ 5.516317] usbcore: registered new interface driver uvcvideo
<6>[ 5.516325] USB Video Class driver (1.1.1)
<6>[ 5.592912] Bluetooth: Core ver 2.19
<6>[ 5.592987] NET: Registered protocol family 31
<6>[ 5.592994] Bluetooth: HCI device and connection manager initialized
<6>[ 5.593080] Bluetooth: HCI socket layer initialized
<6>[ 5.593095] Bluetooth: L2CAP socket layer initialized
<6>[ 5.593128] Bluetooth: SCO socket layer initialized
<6>[ 5.611230] usbcore: registered new interface driver btusb
<6>[ 5.842479] EXT4-fs (sda4): re-mounted. Opts: (null)
<6>[ 6.349525] psmouse serio4: synaptics: Touchpad model: 1,
fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655,
fw id: 528222
<6>[ 6.384855] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input19
<11>[ 6.708490] init: could not import file '/init.android_x86.rc' from '/init.rc'
<5>[ 6.949661] intel_rng: FWH not detected
<6>[ 7.030808] samsung_laptop: detected SABI interface: SwSmi@
<6>[ 7.030818] samsung_laptop: Backlight controlled by ACPI video driver
<7>[ 7.142590] power_supply BAT1: uevent
<7>[ 7.142603] power_supply BAT1: POWER_SUPPLY_NAME=BAT1
<7>[ 7.158505] power_supply BAT1: prop STATUS=Full
<7>[ 7.158522] power_supply BAT1: prop PRESENT=1
<7>[ 7.158535] power_supply BAT1: prop TECHNOLOGY=Li-ion
<7>[ 7.158546] power_supply BAT1: prop CYCLE_COUNT=0
<7>[ 7.158558] power_supply BAT1: prop VOLTAGE_MIN_DESIGN=11100000
<7>[ 7.158570] power_supply BAT1: prop VOLTAGE_NOW=12481000
<7>[ 7.158581] power_supply BAT1: prop CURRENT_NOW=0
<7>[ 7.158592] power_supply BAT1: prop CHARGE_FULL_DESIGN=5200000
<7>[ 7.158604] power_supply BAT1: prop CHARGE_FULL=4200000
<7>[ 7.158615] power_supply BAT1: prop CHARGE_NOW=4200000
<7>[ 7.158627] power_supply BAT1: prop CAPACITY=100
<7>[ 7.158638] power_supply BAT1: prop CAPACITY_LEVEL=Full
<7>[ 7.158649] power_supply BAT1: prop MODEL_NAME=
<7>[ 7.158661] power_supply BAT1: prop MANUFACTURER=SAMSUNG Electronics
<7>[ 7.158672] power_supply BAT1: prop SERIAL_NUMBER=
<7>[ 7.226478] power_supply ADP1: uevent
<7>[ 7.226492] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
<7>[ 7.227875] power_supply ADP1: prop ONLINE=1
<11>[ 7.257543] init: /dev/hw_random not found
<6>[ 7.552647] usbcore: deregistering interface driver btusb
<3>[ 7.555125] Bluetooth: hci0 urb f671f080 failed to resubmit (2)
<6>[ 7.571177] NET: Unregistered protocol family 31
<11>[ 7.690974] init: /dev/hw_random not found
<11>[ 7.712385] init: Unable to read property file '/system/default.prop'
<11>[ 7.712419] init: Unable to read property file '/data/local.prop'
<12>[ 7.770268] healthd: BatteryHealthPath not found
<12>[ 7.770285] healthd: BatteryTemperaturePath not found
<6>[ 7.770323] binder: 1317:1317 transaction failed 29189, size 0-0
<6>[ 7.860366] input: Android Power Button as /devices/virtual/input/input20
<11>[ 8.912182] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
<11>[ 8.912201] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
<11>[ 8.912217] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
<6>[ 9.136112] capability: warning: `su' uses 32-bit capabilities (legacy support in use)
<11>[ 9.187725] init: untracked pid 1361 exited
<11>[ 9.272502] fs_mgr: Cannot open file /fstab.android_x86
<4>[ 30.132416] system_server (1643): /proc/1643/oom_adj is deprecated, please use /proc/1643/oom_score_adj instead.
<14>[ 30.364289] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<6>[ 30.521972] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 30.521983] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 30.521988] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 30.521992] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 30.521996] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 30.522000] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 30.522051] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[ 30.888264] sky2 0000:03:00.0 eth0: enabling interface
<6>[ 30.888705] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 32.684364] wlan0: authenticate with 00:1e:4a:33:88:01
<6>[ 32.691534] wlan0: send auth to 00:1e:4a:33:88:01 (try 1/3)
<6>[ 32.694080] wlan0: authenticated
<6>[ 32.695066] wlan0: associate with 00:1e:4a:33:88:01 (try 1/3)
<6>[ 32.698007] wlan0: RX AssocResp from 00:1e:4a:33:88:01 (capab=0x421 status=0 aid=2)
<6>[ 32.698193] wlan0: associated
<6>[ 37.918059] nf_conntrack: automatic helper assignment is
deprecated and it will be removed soon. Use the iptables CT target to
attach helpers instead.
<11>[ 38.776533] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<14>[ 67.772583] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<11>[ 77.726789] init: untracked pid 2995 exited
<11>[ 77.777114] init: untracked pid 3072 exited
<11>[ 88.987586] init: untracked pid 3215 exited
<11>[ 89.204846] init: untracked pid 3217 exited
<11>[ 89.664386] init: untracked pid 3271 exited
<11>[ 89.884881] init: untracked pid 3275 exited
<11>[ 90.674841] init: untracked pid 3290 exited
<11>[ 90.906873] init: untracked pid 3292 exited
<11>[ 91.182304] init: untracked pid 3337 exited
<11>[ 91.398575] init: untracked pid 3340 exited
<11>[ 91.808575] init: untracked pid 3368 exited
<11>[ 92.024863] init: untracked pid 3371 exited
<11>[ 95.501105] init: untracked pid 3391 exited
<11>[ 95.724760] init: untracked pid 3393 exited
<11>[ 95.876517] init: untracked pid 3408 exited
<11>[ 96.099538] init: untracked pid 3411 exited
<6>[ 96.219008] EXT4-fs (sda4): re-mounted. Opts: (null)
<6>[ 96.235321] EXT4-fs (sda4): re-mounted. Opts: (null)
<11>[ 96.274917] init: untracked pid 3429 exited
<11>[ 96.503567] init: untracked pid 3431 exited
<11>[ 96.854550] init: untracked pid 3459 exited
<11>[ 97.078730] init: untracked pid 3463 exited
<11>[ 97.284629] init: untracked pid 3490 exited
<11>[ 97.503207] init: untracked pid 3492 exited
<11>[ 98.174248] init: untracked pid 3514 exited
<11>[ 98.396666] init: untracked pid 3518 exited
<11>[ 98.653872] init: untracked pid 3533 exited
<11>[ 98.869507] init: untracked pid 3535 exited
<4>[ 111.965132] perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
<11>[ 118.917053] init: untracked pid 3574 exited
<11>[ 119.149437] init: untracked pid 3578 exited
<11>[ 119.337535] init: untracked pid 3593 exited
<11>[ 119.559449] init: untracked pid 3595 exited
<11>[ 119.912446] init: untracked pid 3623 exited
<11>[ 120.141925] init: untracked pid 3627 exited
<11>[ 120.870198] init: untracked pid 3660 exited
<11>[ 121.105615] init: untracked pid 3664 exited
<11>[ 121.235580] init: untracked pid 3679 exited
<11>[ 121.461162] init: untracked pid 3681 exited
<11>[ 121.808725] init: untracked pid 3709 exited
<11>[ 122.040448] init: untracked pid 3714 exited
<14>[ 127.773419] healthd: battery l=100 v=12481 t=0.0 h=1 st=5 c=0 chg=a
<6>[ 142.825156] usb 1-1: new high-speed USB device number 6 using ehci-pci
<6>[ 142.958875] usb 1-1: New USB device found, idVendor=148f, idProduct=3070
<6>[ 142.958894] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 142.958907] usb 1-1: Product: 802.11 n WLAN
<6>[ 142.958919] usb 1-1: Manufacturer: Ralink
<6>[ 142.958930] usb 1-1: SerialNumber: 1.0
<6>[ 143.172163] usb 1-1: reset high-speed USB device number 6 using ehci-pci
<6>[ 143.299146] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
<6>[ 143.327983] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
<7>[ 143.329934] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[ 143.338697] usbcore: registered new interface driver rt2800usb
<11>[ 181.441947] init: untracked pid 3766 exited
<11>[ 181.670081] init: untracked pid 3770 exited
<11>[ 181.901639] init: untracked pid 3785 exited
<11>[ 182.126754] init: untracked pid 3787 exited
<11>[ 182.598863] init: untracked pid 3818 exited
<11>[ 182.824644] init: untracked pid 3822 exited
<11>[ 183.033449] init: untracked pid 3837 exited
<11>[ 183.255830] init: untracked pid 3839 exited
<11>[ 183.794931] init: untracked pid 3869 exited
<11>[ 184.005434] init: untracked pid 3893 exited
<11>[ 184.041381] init: untracked pid 3872 exited
<11>[ 184.225662] init: untracked pid 3895 exited
<11>[ 184.586425] init: untracked pid 3915 exited
<11>[ 184.807690] init: untracked pid 3917 exited
<14>[ 187.772564] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<11>[ 193.913554] init: untracked pid 3935 exited
<11>[ 194.130933] init: untracked pid 3938 exited
<11>[ 194.303692] init: untracked pid 3954 exited
<11>[ 194.528880] init: untracked pid 3956 exited
<11>[ 194.974517] init: untracked pid 3986 exited
<11>[ 195.202083] init: untracked pid 3989 exited
<11>[ 195.503326] init: untracked pid 4005 exited
<11>[ 195.729565] init: untracked pid 4007 exited
<11>[ 195.862407] init: untracked pid 4035 exited
<11>[ 196.077612] init: untracked pid 4037 exited
<11>[ 196.363290] init: untracked pid 4062 exited
<11>[ 196.605661] init: untracked pid 4064 exited
<11>[ 196.840339] init: untracked pid 4082 exited
<11>[ 197.056236] init: untracked pid 4084 exited
<11>[ 218.656201] init: untracked pid 4120 exited
<11>[ 218.891452] init: untracked pid 4123 exited
<11>[ 218.978848] init: untracked pid 4139 exited
<11>[ 219.194725] init: untracked pid 4141 exited
<7>[ 246.771998] power_supply BAT1: power_supply_changed
<7>[ 246.772066] power_supply BAT1: power_supply_changed_work
<7>[ 246.772085] power_supply BAT1: power_supply_update_bat_leds 4
<7>[ 246.772125] power_supply BAT1: uevent
<7>[ 246.772137] power_supply BAT1: POWER_SUPPLY_NAME=BAT1
<7>[ 246.772163] power_supply BAT1: prop STATUS=Full
<7>[ 246.772180] power_supply BAT1: prop PRESENT=1
<7>[ 246.772197] power_supply BAT1: prop TECHNOLOGY=Li-ion
<7>[ 246.772213] power_supply BAT1: prop CYCLE_COUNT=0
<7>[ 246.772229] power_supply BAT1: prop VOLTAGE_MIN_DESIGN=11100000
<7>[ 246.772245] power_supply BAT1: prop VOLTAGE_NOW=12482000
<7>[ 246.772261] power_supply BAT1: prop CURRENT_NOW=0
<7>[ 246.772277] power_supply BAT1: prop CHARGE_FULL_DESIGN=5200000
<7>[ 246.772293] power_supply BAT1: prop CHARGE_FULL=4200000
<7>[ 246.772309] power_supply BAT1: prop CHARGE_NOW=4200000
<7>[ 246.772325] power_supply BAT1: prop CAPACITY=100
<7>[ 246.772341] power_supply BAT1: prop CAPACITY_LEVEL=Full
<7>[ 246.772356] power_supply BAT1: prop MODEL_NAME=
<7>[ 246.772372] power_supply BAT1: prop MANUFACTURER=SAMSUNG Electronics
<7>[ 246.772388] power_supply BAT1: prop SERIAL_NUMBER=
<14>[ 246.773948] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 247.770677] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 307.772800] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 367.772523] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 427.773132] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 487.773080] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 547.772824] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 607.772615] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<14>[ 667.773206] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<11>[ 725.375613] init: untracked pid 4370 exited
<14>[ 727.772452] healthd: battery l=100 v=12482 t=0.0 h=1 st=5 c=0 chg=a
<11>[ 734.516843] init: untracked pid 4424 exited
<11>[ 734.737759] init: untracked pid 4426 exited
<4>[ 748.367165] perf interrupt took too long (5017 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
merci pour votre aide
pstglia
la commande dmesg/logcat est 'not found'
app dmesg me donne :
Marie et Patrick T
hello
for info, the app. USB Host Controller, detected : 3070 : 148f - Ralink 802.11n WLAN
the result of lsmod with connected USB ALFA Network :
rt2800usb 15746 0 - Live 0x00000000
rt2x00usb 8837 1 rt2800usb, Live 0x00000000
rt2800lib 66288 1 rt2800usb, Live 0x00000000
rt2x00lib 34510 3 rt2800usb,rt2x00usb,rt2800lib, Live 0x00000000
binfmt_misc 4852 1 - Live 0x00000000
samsung_laptop 6987 0 - Live 0x00000000
rng_core 4121 0 - Live 0x00000000
mac_hid 2731 0 - Live 0x00000000
pppoe 6626 0 - Live 0x00000000
uvcvideo 55156 0 - Live 0x00000000
videobuf2_vmalloc 2588 1 uvcvideo, Live 0x00000000
videobuf2_memops 2150 1 videobuf2_vmalloc, Live 0x00000000
videobuf2_core 30283 1 uvcvideo, Live 0x00000000
psmouse 88210 0 - Live 0x00000000
atkbd 14396 0 - Live 0x00000000
pcspkr 1354 0 - Live 0x00000000
sky2 36903 0 - Live 0x00000000
ath5k 109921 0 - Live 0x00000000
ath 16135 1 ath5k, Live 0x00000000
mac80211 368916 4 rt2x00usb,rt2800lib,rt2x00lib,ath5k, Live 0x00000000
cfg80211 350409 4 rt2x00lib,ath5k,ath,mac80211, Live 0x00000000
i2c_i801 13293 0 - Live 0x00000000
lpc_ich 12109 0 - Live 0x00000000
snd_hda_codec_realtek 52902 1 - Live 0x00000000
snd_hda_codec_generic 41801 1 snd_hda_codec_realtek, Live 0x00000000
shpchp 19447 0 - Live 0x00000000
snd_hda_intel 20252 0 - Live 0x00000000
snd_hda_controller 19728 1 snd_hda_intel, Live 0x00000000
snd_hda_codec 92736 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller, Live 0x00000000
snd_hwdep 4409 1 snd_hda_codec, Live 0x00000000
snd_pcm 67937 3 snd_hda_intel,snd_hda_controller,snd_hda_codec, Live 0x00000000
snd_timer 14529 1 snd_pcm, Live 0x00000000
snd 47842 6 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer, Live 0x00000000
soundcore 4971 2 snd_hda_codec,snd, Live 0x00000000
i915 711768 10 - Live 0x00000000
drm_kms_helper 59597 1 i915, Live 0x00000000
drm 220672 12 i915,drm_kms_helper, Live 0x00000000
i2c_algo_bit 4297 1 i915, Live 0x00000000
acpi_cpufreq 9029 1 - Live 0x00000000
thank youMarie et Patrick T
I also have this info with the app . :
S3C USB host driver not found!
Root USB present, USB Host mode is active!
pstglia
Marie et Patrick T
pstglia
I Create a symbolic link named rt3070.bin and point it to rt2870.binbut nothing more ...
there is a Linux kernel 2.6.37 AlfaNetwork driver but I do not know how to install it on android x86.and if insdispensable?
wpa_supplicant you know?
Mohamed ben moula
https://groups.google.com/d/msg/android-x86/HlQsYwe_4fU/m_Hv4f16_P8J