Compatibility Raspberry PI3 model B+ with ANDROID ?

[m.li...@gmail.com]

I would like to install android on my rasberry pi3 model b + but it does not work with the latest version of lineage. I have a rainbow screen.
Do you know when we will have a compatible android version to run xibo on this new model?

[vtor...@gmail.com]

I'm facing the same issue. :\

[vtor...@gmail.com]

Does anyone have any news regarding this situation? Any android TV OS ready for raspberry pi 3 b+?

[ayt...@gmail.com]

I have that same problem.

when will it work?

[sergiof...@gmail.com]

Me too, Any update?

[frdieud...@gmail.com]

Same Problem here

[halel...@gmail.com]

i've looked around - theres the emteria project, which is paid but has a free version. that's the best i've found so far.
i can confirm it working on the pi 3 b+.

[heni...@gmail.com]

Same problem and Emteria is free only for try

[jim.ha...@gmail.com]

It is annoying that I bought the latest raspberry pi (pi3 Model B+) just to run Android, and there is no working system yet for a pi3 B+

KonstaKANG's Lineage-14.1 shows no display after the rainbow screen.

The Emteria project works but is very poor compared with Lineage and it costs!

And---- I have been running  Android (Marshmellow) for many months on a Tinkerboard, and it works fine!

When is it going to work?

[frees...@gmail.com]

FWIW, I tried lineage-15.1 on RPi 3 B+ with official 7 inch touchscreen and it works just fine.

https://github.com/lineage-rpi/android_local_manifest

jim.ha...@gmail.com於 2018年8月1日星期三 UTC+8上午5時13分29秒寫道：

[sunnyr...@gmail.com]

Really? it support video playback?

[EUISUNG KIM]

For those of you who gets the black screen after flashing LineageOS 14.1 or 15.1 on RPi3 B or B+...

1. Look for "config" file in your SD,

2. Modify "hdmi_group" and "hdmi_mode" values accordingly.

For instance, hdmi_group=1 enables CEA commands for TVs and hdmi_group=2 enables DMT commands for monitors.

hdmi_mode depends on your displaying device HW spec such as maximum frequency and resolution it supports.

Here is the reference...

https://www.raspberrypi.org/documentation/configuration/config-txt/

https://www.raspberrypi.org/documentation/hardware/display/troubleshooting.md

https://www.raspberrypi.org/documentation/configuration/config-txt/video.md

[m.li...@gmail.com]

I tested lineage version 15.1 and still the pb of the rainbow pattern then reboot. Can not start the raspberry on android.
What exactly should I put in the config.txt file?
My screen is a 19 inch LCD.
Thanks for your help.

[m.li...@gmail.com]

that's it works but only if the network cable is unplugged. It restarts constantly with the rainbow pattern.
With OSMC, the rasberry did not have a problem with the network cable.
I conclude that the lineage version 15.1 has a flaw at this level. Do you have a solution to correct the problem of the network card?

[jsel...@gmail.com]

The developer has removed wifi just to keep his distro for himself

test plug in the Ethernet cable that is the only way it works.