Connect Samsung Galaxy Tab with PC via USB- Serial (RS232) - URGENT

[Pujan Zaverchand]

Hello,

I am having Samsung Galaxy Tablet and I need to connect to my pc via
USB - Serial. From my tablet I am using Flex Serial Cable ( where one
end is for serial port). From my PC I have USB to Serial cable and
with the connector in middle I am connecting both the cables.

When I hooked the usb cable - in the device managers, I see the
Profilic USB to Serial (COM6). When I open hyperterminal - During the
tablet bootup - It shows me the data that the tablet is booting up.
But in the windows command prompt when I try to list the device using
adb command (adb devices) - nothing shows and so I am not able to use
any adb commands.

Can anyone please help me resolve this issue.

Thanks
Pujan

[vame]

Your commands are not reaching to the device from windows command
prompt.
Try the follwing:
a. List the devices you can connect to using ADB:
# adb devices

b. Select the device and send command:
# adb -s <serialNumber> <command>

--
Vame.

[Chris Stratton]

On Wednesday, June 29, 2011 9:58:49 AM UTC-4, Pujan Zaverchand wrote:

 

When I hooked the usb cable  - in the device managers, I see the
Profilic USB to Serial (COM6). When I open hyperterminal - During the
tablet bootup - It shows me the data that the tablet is booting up.
But in the windows command prompt when I try to list the device using
adb command (adb devices) - nothing shows and so I am not able to use
any adb commands.

Can anyone please help me resolve this issue.

Are you sure you have both an ADB daemon and and ADB program on the PC which support connection via serial ports?

I've never seen a version for either end that supported this - it certainly could be added, but I'm not aware that is has been.

Of course, once you have a serial port you can implement networking over it, and once you have that you can run adb over tcp.