[Kernel PANIC] ANDROID NFS Booting.

[Ki Seok Park]

host : ubuntu 10.04 x64
android : google.gingerbread 2.3.3_r1
kernel : android.kernel 2.6.35.7

Hi.

I have a some board, using samsung s5pv210.

when Android is booting(on NAND), servicemanager is die.

------------------------------------------------------------------------------------
request_suspend_state:wakeup (0->0) at 20730120503 (2011-01-01
12:00:20.112335668 UTC)
init: untracked pid 79 exited
init: untracked pid 87 exited
init: untracked pid 94 exited
init: untracked pid 95 exited
request_suspend_state: wakeup (0->0) at 25385392045
(2011-01-0112:00:24.767607335 UTC)
init: untracked pid 89 exited
init: untracked pid 98 exited
init: critical process 'servicemanager' exited 4 times in 4
minutes;rebooting into recovery mode
Restarting system with command 'recovery'.
------------------------------------------------------------------------------------

so, I should try to boot, gdb debugging via NFS booting.

However, when booting form NFS, other problems will occur.

that is. KERNEL - PANIC.....

------------------------------------------------------------------------------------
net eth0: SMSC911x/921x identified at 0xf088e000, IRQ: 43
IP-Config: Complete:
device=eth0, addr=192.168.0.111, mask=255.255.255.0,
gw=192.168.0.254,
host=192.168.0.111, domain=, nis-domain=(none),
bootserver=192.168.0.100, rootserver=192.168.0.100, rootpath=
DBUG_PORT must not use AFC!
Looking up port of RPC 100003/2 on 192.168.0.100
Looking up port of RPC 100005/1 on 192.168.0.100
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing init memory: 156K
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
------------------------------------------------------------------------------------
(kernel/exit.c)

so. I want to trace android ,kernel booting mecanism using gdb or
strace.

how can i do?

and how can I solve this problem?

NFS always problem......

(kernel source was provided Board company. Android source too.)

But I want to build, through Google.Reference source.

when booting from Board company source, that is good operating.

but my gingerbread source is trouble.

i think it is kernel problem. but only android source changed.




THIS IS MY NFS BOOTING MESSAGE.
------------------------------------------------------------------------------------
U-Boot 1.3.4 (Mar 23 2012 - 01:38:16) for MANGO210


CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MANGO210
DRAM: 512 MB
SD/MMC: 7647MB
NAND: 256 MB
In: serial
Out: serial
Err: serial
checking mode for fastboot ...

U-Boot 1.3.4 (Mar 23 2012 - 01:38:16) for MANGO210


CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MANGO210
DRAM: 512 MB
SD/MMC: 7647MB
NAND: 256 MB
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
Hit any key to stop autoboot: 0
smc911x: initializing
smc911x: detected LAN9220 controller
smc911x: phy initialized
smc911x: MAC 00:40:5c:26:0a:5b
TFTP from server 192.168.0.100; our IP address is 192.168.0.111
Filename 'Gingerbread.Patch.zImage'.
Load address: 0x21000000
Loading:
#################################################################

#################################################################

#################################################################

#################################################################
#####################################
done
Bytes transferred = 4351908 (0x4267a4)
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.7 (liverpool@laptop-server) (gcc version 4.4.1
(Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Mon Apr 2 16:38:24 KST 2012
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MANGO210
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41001099
Memory policy: ECC disabled, Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000
V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_spdif: source is sclk_audio (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is ext_xtal (0), rate is 24000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_mdnie: source is ext_xtal (0), rate is 24000000
sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x20c6f000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
s5pv210: 6144000 bytes system memory reserved for fimc0 at 0x42400000
s5pv210: 6144000 bytes system memory reserved for fimc1 at 0x429dc000
s5pv210: 6144000 bytes system memory reserved for fimc2 at 0x42fb8000
s5pv210: 6144000 bytes system memory reserved for jpeg at 0x43594000
s5pv210: 6144000 bytes system memory reserved for fimd at 0x43b70000
s5pv210: 1536000 bytes system memory reserved for texstream at
0x4414c000
s5pv210: 1536000 bytes system memory reserved for pmem_gpu1 at
0x442c3000
s5pv210: 6144000 bytes system memory reserved for g2d at 0x4443a000
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
129536
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.100:/home/
liverpool/src/Gingerbread/PATCH.by_park/NFSROOT, nolock
ip=192.168.0.111:192.168.0.100:192.168.0.254:255.255.255.0::eth0:off
init=/init console=ttySAC1,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB = 512MB total
Memory: 398460k/398460k available, 125828k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0800000 - 0xfc000000 ( 184 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc002f000 ( 156 kB)
.text : 0xc002f000 - 0xc0760000 (7364 kB)
.data : 0xc0760000 - 0xc07a8660 ( 290 kB)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:393
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
console [ttySAC1] enabled
Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
pmstats at 00000000
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000,
tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000,
tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000,
tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000,
tin=divclk, base 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 40 (SDA) and 41 (SCL)
i2c-gpio i2c-gpio.2: using pins 44 (SDA) and 45 (SCL)
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
MANGO210 wifi init function
MANGO210 RTC, (c) 2010 Samsung Electronics
mango210-rtc mango210-rtc: rtc disabled, re-enabling
mango210-rtc mango210-rtc: rtc core: registered s3c as rtc0
S5PV210 ADC driver, (c) 2010 Samsung Electronics
cpuidle: phy_regs_save:0x4fd7e000
Loaded driver for PL330 DMAC-0 s3c-pl330
DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
audit: initializing netlink socket (disabled)
type=2000 audit(0.792:1): initialized
ashmem: initialized
msgmni has been set to 778
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
s3cfb s3cfb: [fb2] dma: 0x43b70000, cpu: 0xf1000000, size: 0x005dc000
FIMD src sclk = 166750000
s3cfb s3cfb: registered successfully
Start display and show logo
ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and
David Sterba
PA FB = 0x43B70000, bits per pixel = 32
screen width=800 height=480 va=0xe3b70000 pa=0x43b70000
xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
fb_size=6144000
Back frameBuffer[0].VAddr=e3ce7000 PAddr=43ce7000 size=1536000
Back frameBuffer[1].VAddr=e3e5e000 PAddr=43e5e000 size=1536000
Back frameBuffer[2].VAddr=e3fd5000 PAddr=43fd5000 size=1536000
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a
S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a
S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a
S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a
S3C6400/10
brd: module loaded
loop: module loaded
pmem_gpu1: 1 init
Android kernel panic handler initialized (bind=kpanic)
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit)
Creating 6 MTD partitions on "s5pv210-nand":
0x000000000000-0x000000100000 : "bootloader"
0x000000100000-0x000000600000 : "recovery"
0x000000600000-0x000000b00000 : "kernel"
0x000000b00000-0x000000e00000 : "ramdisk"
0x000000e00000-0x000008600000 : "system"
0x000008600000-0x000010000000 : "userdata"
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01,
irq=-1)
net eth0: MAC Address: 96:5b:9c:31:68:43
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: s5pv210 EHCI
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: s5pv210 OHCI
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung
Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c076cf78
android_bind
android_usb gadget: android_usb ready
f_acm init
android_register_function acm
f_adb init
android_register_function adb
f_mass_storage init
fsg_probe pdev: c076bdf0, pdata: c076cf9c
android_register_function usb_mass_storage
f_mtp init
android_register_function mtp
f_rndis init
android_register_function rndis
rndis_function_bind_config MAC: 00:00:00:00:00:00
android_usb gadget: using random self ethernet address
android_usb gadget: using random host ethernet address
usb0: MAC 9a:ee:1e:73:98:89
usb0: HOST MAC 92:4d:00:ca:f5:46
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
adb_bind_config
mtp_bind_config
mice: PS/2 mouse device common for all mice
input: mango-keys as /devices/platform/mango-keys.0/input/input0
start MANGO GPIO Button V1.1
vd5376 0-0053: vd5376 initialization failed
vd5376 2-0053: vd5376 initialization failed
S5P Touchscreen driver, (c) 2008 Samsung Electronics
S5P TouchScreen got loaded successfully : 12 bits
input: S5P TouchScreen as /devices/virtual/input/input1
using rtc device, s3c, for alarms
i2c /dev entries driver
Linux video capture interface: v2.00
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2009 Samsung Electronics
S5PC11X CEC Driver, (c) 2009 Samsung Electronics
s3c_bat_init
sec-fake-battery sec-fake-battery: s3c_bat_probe
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-
de...@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
wm8960 0-001a: No platform data supplied
android_usb gadget: high speed config #1: Android Composite
mmc0: new high speed SDIO card at address 0001
s3c_idma_preallocate_buffer: VA-f08c0000 PA-C0000000 163840bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
s3c_idma_preallocate_buffer: VA-f0900000 PA-C0000000 163840bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
mmc2: new high speed SDHC card at address b368
mmcblk0: mmc2:b368 USD 7.46 GiB
mmcblk0: p1 p2 p3
ASoC: Failed to create HP-L/R debugfs file
ASoC: Failed to create Speaker-L/R debugfs file
asoc: DIT <-> samsung-spdif mapping ok
ALSA device list:
#0: mango (WM8960)
#1: SMDK (spdif-dit)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (6225 buckets, 24900 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
ThumbEE CPU extension supported.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev
2
mango210-rtc mango210-rtc: rtc disabled, re-enabling
mango210-rtc mango210-rtc: setting system clock to 2011-01-01 12:00:02
UTC (1293883202)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
<6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
[CRZ] SD/MMC channel 2 bus width : 1
[CRZ] sdhci_s3c_set_clock max_clock 47642857
[CRZ] SD/MMC channel 2 bus width : 1
[CRZ] SD/MMC channel 2 bus width : 1
net eth0: SMSC911x/921x identified at 0xf088e000, IRQ: 43
IP-Config: Complete:
device=eth0, addr=192.168.0.111, mask=255.255.255.0,
gw=192.168.0.254,
host=192.168.0.111, domain=, nis-domain=(none),
bootserver=192.168.0.100, rootserver=192.168.0.100, rootpath=
DBUG_PORT must not use AFC!
Looking up port of RPC 100003/2 on 192.168.0.100
Looking up port of RPC 100005/1 on 192.168.0.100
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing init memory: 156K
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 5 seconds..▒▒▒▒▒▒OK
------------------------------------------------------------------------------------

[Vladimir Murzin]

Hi!

init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!

This means that kernel has booted up and the first userspace process (init) has been called. But for whatever reasons init process couldn't handle required resource (/initlogo.rle), so signal for termination was sent to init process. Kernel don't know what to do without any process, so it falls into panic.
I suggest checking your rootfs. May be you need another one...

Best wishes,
Vladimir Murzin

--
unsubscribe: android-kerne...@googlegroups.com
website: http://groups.google.com/group/android-kernel

[jagan]

Sorry, I didn't understand your problem.

If your problem is

when Android is booting(on NAND), servicemanager is die. 

Try to enable binder on ur kernel, Android service manger requires binder driver in kernel.

Regards,

Jagan.

[NEO]

Hi  

I cannot find any thing wrong but this.

Freeing init memory: 156K
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 5 seconds..▒▒▒▒▒▒OK

The kernel source is all the same, the only different is android source code, is it right?

Please check the android source code's init.rc file.

You can check the different of android source code's system/core/rootdir and /device/xxx/ about your board code.

Thanks

[Vinicius Tinti]

I have faced this problems some days ago.

In my case the problem was the VMSPLIT2G and VMSPLIT3G kernel configuration. I had some precompiled libraries with VMSPLIT3G but my kernel was built with VMSPLIT2G.

By changing it my problem was solved. Please check this link (it is not in French don't "worry/panic"): http://ftpb.free.fr/vb/showthread.php?p=6

Regards,

Tinti

[Jiejing.Zhang]

Hi,

If you modify init.xxx.rc to let it don't mount /system etc,  like below.

on fs
# mount ext4 partitions
    mount ext4 /dev/block/mmcblk0p5 /system
    mount ext4 /dev/block/mmcblk0p5 /system ro remount
    mount ext4 /dev/block/mmcblk0p7 /data nosuid nodev nodiratime noatime noauto_da_alloc
    mount ext4 /dev/block/mmcblk0p6 /cache nosuid nodev
    mount ext4 /dev/block/mmcblk0p8 /vendor nosuid nodev

you should also delete "on fs" too, if the "on fs" without any command, the init process will meet segment fault, so the init will kill him self.

Best regards,
Zhang Jiejing

2012/4/3 Ki Seok Park <katsu...@gmail.com>

[hedwin]

The problem can also be on the server side (in most cases it is).
Did you check the firewall running on the server?