[pixel 3] build the userdebug version to gain adb remount, adb push permission

[jw wang]

Hello google,

not sure if this is the right place for this topic, I bought pixel 3, apparently came with the user build which mean I'm unable to perform adb remount, adb push, so I repo sync android-9.0.0_r11 AOSP, 

lunch 19. aosp_blueline-userdebug, , make -j4, after building finish and generate binary result,  my questions are :

1. if it's possible to gain adb remount, and adb push permissions from this userdebug build image ?  or additional configuration is needed ?

2. I'm coping the system.img and boot.img from ubuntu/android-9.0.0_r11/out/target/product/blueline   to windows folder, perform fastboot flash system system.img,   and fastboot flash system boot.img, but it ends up entering a bootloop in bootloader,  should I better do the entire flash in the android-9.0.0_r11/out/target/product/blueline  at my ubuntu  ??

thanks

[Alessio Balsini]

Hi Jw,

There are some missing pieces in your procedure, e.g., you didn't
mention the device binaries and the flashing procedure is not
complete.
Please, try again following the documentation:
https://source.android.com/setup/build/building.

Cheers,
Alessio

> --
> --
> You received this message because you are subscribed to the "Android Building" mailing list.
> To post to this group, send email to android-...@googlegroups.com
> To unsubscribe from this group, send email to
> android-buildi...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/android-building?hl=en
>
> ---
> You received this message because you are subscribed to the Google Groups "Android Building" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to android-buildi...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/android-building/fa07f02a-2a7d-482e-abc3-3612072a3189%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[jw wang]

Hi Alessio

I was missing the steps of binary blob for pixel 3, after installing the blob into root of aosp, it works as a charm !

On Thursday, June 27, 2019 at 4:50:21 PM UTC+8, Alessio Balsini wrote:

Hi Jw,

There are some missing pieces in your procedure, e.g., you didn't
mention the device binaries and the flashing procedure is not
complete.
Please, try again following the documentation:
https://source.android.com/setup/build/building.

Cheers,
Alessio


On Mon, Jun 24, 2019 at 4:45 PM jw wang <j...@icepower.dk> wrote:
>
> Hello google,
>
> not sure if this is the right place for this topic, I bought pixel 3, apparently came with the user build which mean I'm unable to perform adb remount, adb push, so I repo sync android-9.0.0_r11 AOSP,
> lunch 19. aosp_blueline-userdebug, , make -j4, after building finish and generate binary result,  my questions are :
>
> 1. if it's possible to gain adb remount, and adb push permissions from this userdebug build image ?  or additional configuration is needed ?
> 2. I'm coping the system.img and boot.img from ubuntu/android-9.0.0_r11/out/target/product/blueline   to windows folder, perform fastboot flash system system.img,   and fastboot flash system boot.img, but it ends up entering a bootloop in bootloader,  should I better do the entire flash in the android-9.0.0_r11/out/target/product/blueline  at my ubuntu  ??
>
>
> thanks
>
> --
> --
> You received this message because you are subscribed to the "Android Building" mailing list.
> To post to this group, send email to android-...@googlegroups.com
> To unsubscribe from this group, send email to

> android-...@googlegroups.com

> For more options, visit this group at
> http://groups.google.com/group/android-building?hl=en
>
> ---
> You received this message because you are subscribed to the Google Groups "Android Building" group.

> To unsubscribe from this group and stop receiving emails from it, send an email to android-...@googlegroups.com.