copy software pc to amiga
William Gadet
Next question i have now the software to conect my pc to my amiga; bij
serialcable or if i want by lablink.
the software i have is pc2amiga and kermit.
NOW FOLLOWS THE JOKE??????????
i can only acces internet by pc; so this software stands now on my PC.
I cannot connect to my amiga by serial or lablink cable, either burn the
software to cd-r because my amiga has no cd-rom.
The software above needs partitial to be installed on the pc and ON MY
AMIGA. but i can`t acces my amiga.
how do I get this software to my amiga????????????????????????
HELP I``m geting crazy about this BUT I WANT TO HAVE IT FUNCTION
Who dares to help my again???????
lots of thanks William
J.O. Aho
> The software above needs partitial to be installed on the pc and ON MY
> AMIGA. but i can`t acces my amiga.
> how do I get this software to my amiga????????????????????????
Depending on your workbench version, you can use crossdos and read 720kb
floppies. If I don't miss remeber it totally, WB2+ has had this.
Marcel DeVoe
Well there's several ways, but first what version of Amiga workbench do
you have? If you have WB 2.1 or higher, then CrossDos comes natively
supplied and all you have to do is click on the PC0 icon that you will
find on one of your workbench disks and you will be able to read 720k PC
formatted floppies. In order to do this on your PC, you need to cover the
second hole on a standard HD floppy (the one without the slider) with
tape and then format it. Then copy your files to it and pop it into your
Amiga and you're all set.
OTOH, if you only have a 1.3 Amiga then unless you still have your
original WB 1.3 workbench install floppies you're SOL. If you do have them
you should have Amiga Basic on one of them and you're partially in
business.
You can find out how to do this here,
http://amiga.nvg.org/warlock/wartrans/
or
http://homepage.uibk.ac.at/homepage/c725/c72578/amiga/adfsenderterminal/methods.html
But the only problem I'm not sure of is if PC2Amiga will work on a 1.3
Amiga in the first place. In which case you'll have to transfer the entire
.adf or DMS files via as instructed in the above link, or just get
MessyDos from Aminet and transfer that, then you'll be able to read 720k
PC floppies on your 1.3 Amiga.
--
Marcel J. DeVoe - mde...@shore.net - Team *AMIGA*
A4091scsi CV64 96 megs CDRW M1764-17" Catweasel FUSION/Emplant
A4000/060 CyberStorm MKII overclocked 66mhz - see "How to Overclock!"
and "DIY A4000 Tower for $45" @ http://www.shore.net/~mdevoe