Poor VT-100 Quality

[Tom Lake]

After all these years, I finally decided to try the built-in VT-100 terminal on an AD Pro. Yuck!
Here's a photo of it displaying on an Eyoyo 8" monitor. The blurriness is NOT due to a shaky hand while photographing. It really looks this bad. I've tried adjusting phase and clock from the monitor's menu but no luck. Is there anything that can be done?

[Chris Davis]

I have used a dozen different VGA monitors and never had that problem.  My solution would be to get a different monitor.

On Tuesday, October 29, 2024 at 11:26:17 AM UTC-5 John Galt wrote:

nope.

I have 2 Eyoyo 8" LCD monitors and they are both garbage as well. i use them as my dazzler displays.

the Geoff Terminal in the AD Pro is also well below VT-100 compatible. it supports some VT-100 escape code which is why i went for the FABGL Ansi Terminal which is 100% VT-100 supported and then some. 

[Tom Wilson]

Here are two screen shots from my Pro. This is a brand new Eyoyo 8”.

 

I took a picture in both screen modes, to see if there was any difference. 

Tom Wilson
wils...@gmail.com
+1(619)940-6311 

--
You received this message because you are subscribed to the Google Groups "Altair-Duino" group.
To unsubscribe from this group and stop receiving emails from it, send an email to altair-duino...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/altair-duino/c49e0a8d-9941-40b7-85dd-2fabe9606683n%40googlegroups.com.