Rex To Wav File Converter

[Gwendoline Bicksler]

However, after doing this tweaking it's sometimes necessary to process the loop further. While you can usually use a plug-in within Sonar, when correcting a problem with the file by using something like noise reduction, equalisation or limiting, it makes more sense to do destructive edits so that you won't have to make the same changes again in the future. Yet I've found that not all editors are created equal, nor do they create files that work similarly in both Sonar and Acid.

Rex To Wav File Converter
Download Zip https://urllio.com/2wHJWO



A REX file works by slicing a file into pieces based on transients, much as Acid isation does. However, REX slices are discrete 'chunks' of sound that are triggered as if they were notes in a MIDI sequence; play the 'sequence' faster and the tempo speeds up, play it slower and the tempo slows down. There are some fine points, too. For example, if you slow the tempo below the original one, the slices retain the same duration and therefore drift farther apart, opening 'holes' between slices. A REX file can apply a variable amount of timestretching to note decays in order to fill in these 'holes' between slices. When files are sped up, decays are truncated so that start points remain undisturbed.

To bring a REX file into Sonar, first you have to save each slice out individually. Recycle 's heritage includes the ability to send each slice to a key on a hardware keyboard sampler, so there are provisions to save a REX file as a collection of slices.

Interestingly, in one way this method improves upon true REX files: If a slice marker in a REX files lies in any area with lots of signal, there's usually a click during the transition from one slice to the next. In Sonar, sometimes you can eliminate this effect by adding a quick fade in/out or crossfade

To handle these slices as a group, draw a marquee around them. If you're certain of the tempo, go Edit / Bounce to Clip(s) so that they turn into one big clip, making it easier to drag the file around and copy it. You can even Acid ise the pseudo-REX clip if you slip-edit the end of the last slice to fall on a measure or beat boundary, then bounce to clip at the clip's original tempo (as found in Recycle at the start of this whole process).

Although Acid ising remains the most convenient way to timestretch files within Sonar, slicing in this manner can preserve fidelity a bit better for sounds with percussive attacks and short decays, such as drums and even bass or horn stabs.



The original MPCs used a specialist audio file format called SND. All MPCs still load SND files without any problem, although since the MPC1000, it is not possible to save in SND format.

From the MPC1000 onwards, Akai implemented a new PGM file format, most likely to help cope with the additional complexity required of the format. This unfortunately meant that MPCs made before the MPC1000 are not able to read this new MPC format.

WAV stands for Waveform Audio File Format. It is one of the most common audio formats and was created by Microsoft in collaboration with IBM. WAV files usually contain uncompressed audio data with pulse-code modulation (PCM). The WAV files with uncompressed audio data are taking more space than MP3, MP4, or FLAC files. Sending and downloading WAV files also takes much more time and space. Therefore, the WAV files are not as popular as their smaller, more portable counterparts.

AIFF stands for Audio Interchange File Format. The AIFF format was developed by Apple in 1988 and is mostly used on Mac computers. The most AIFF files contain uncompressed audio data encoded with Pulse Code Modulation (PCM) audio codecs. AIFF files, known as AIFF-C or AIFC, can also store the audio encoded with compression audio codecs. The standard file extension for AIFF format, accepted by audio applications, is .aif, .aiff, or .aifc.

The converter can process an unlimited number of files and folders simultaneously, apply optimally automatic or custom settings for output WAV or AIFF files, organize audio metadata and improve the sound of output audio simultaneously with the conversion.

The app encodes nearly all media formats, including but not limited to MP3, WMA, M4A, MP4, FLAC, VID, FLV, AVI, MPG, ASF, MPEG, MPE, MOV, 3GP, M4V, MKV, MOD, OGM, DV files.

The converter supports WAV and AIFF output formats. By default, the WAV format is selected with automatic settings. Automatic settings provide the best possible quality of sound by avoiding useless resampling or remixing.

The app not just transfers all tags from input audio and video but can download tags and artworks from local files, folders, and online databases at once with the conversion. It allows organizing music collections automatically, simultaneously with encoding files to WAV format.

Wavosaur is a cool free sound editor, audio editor, wav editor software for editing, processing and recording sounds, wav and mp3 files. Wavosaur has all the features to edit audio (cut, copy, paste, etc.) produce music loops, analyze, record, batch convert.
Wavosaur supports VST plugins, ASIO driver, multichannel wav files, real time effect processing.
The program has no installer and doesn't write in the registry. Use it as a free mp3 editor, for mastering, sound design. The Wavosaur freeware audio editor works on Windows 98, Windows XP and Windows Vista.
Go to the features page for an overview of the software.



This example specifies which audio track to embed using the src attribute on a nested element rather than directly on the element. It is always useful to include the file's MIME type inside the type attribute, as the browser is able to instantly tell if it can play that file, and not waste time on it if not.

seems the only way you can get this to work is to hack it together like you are doing now. unless you can find somebody who knows C and is willing to assist you, you will probably be on your own. however, you will learn a lot, and i predict your efforts would be highly appreciated here. i also have a ton of Rex-files hanging around, and all i do with them is exporting the good ones out of Reason as audio files, so nowhere near the usefulness of the Rex-format. at least i have the beats though.

Audio loop format used by ReCycle, a sampled loop creation and editing program; stores audio data and loop slicing information; REX files can be quantized, have the tempo changed, and can be tuned or detuned.

Source code file written in the Restructured Extended Executor (Rexx) programming language, a scripting and macro language primarily used to generate reports and process data; contains variables, functions, and other statements that tell the program how to function.

The FileInfo.com team has independently researched all file formats and software programs listed on this page. Our goal is 100% accuracy and we only publish information about file types that we have verified.

DOD REX drum loops can be imported and used in Stylus RMX via the Sage Converter. This is a utility that is made by and comes with Stylus RMX. It should be located in the applications folder after installation of Stylus. This is one of the many videos provided by Stylus and talks specifically about importing third-party REX drum loop libraries using the Sage converter. You never know how completely up to date manufacturer videos are, but this should getting you going if you are new to Drums On Demand REX loops as well as Stylus RMX.

In addition to its real-time audio editing functionality, Transfuser 2 comes with an array of effects, instruments, and samples. Use the Effects module to insert up to four of 20 different effects per track, including Beatcutter, Tape Delay, Pumper, Compressor, Vinyl, Filter, Spring Reverb, Distortion, and Lo-Fi. Transfuser 2 includes a polyphonic analog synthesizer and electric piano instrument for. Transfuser 2 comes with 4.5+GB of loops and phrases that include beats, breaks, basses, acoustic and ethnic instruments, synth sounds, and more. You can also other sample libraries with Transfuser 2 by dragging and dropping your own ACID, REX, Apple Loops, AIFF, and WAV files onto its interface.

The utility handles various command line parameters to be able to read text aloud or save as an audio file. The command line options use the syntax "balcon [options ...]", all parameters must be separated by a space. Options can appear in any order on the command line so long as they are paired with their related parameters. Use the "balcon -?" command line to get help on the command line syntax and parameters.

-lPrints the list of available voices.-gPrints the list of available audio output devices.-f text_fileSets the name of the input text file.-fl file_nameSets the name of the text file with the list of input files (one file name per line).-w wave_fileSets the name of the output file in WAV format. If the option is specified, an audio file will be created. Otherwise, text will be read aloud.-n voice_nameSets the voice name (the part of the name will be enough). If the option is not specified, the voice, defined by the option -id, or the default voice of Windows will be used.-id integerSets Language ID for the voice. Language ID is the language code assigned by Microsoft (for example, "1033" or "0x0409" for "English - United States"). The program will choose the first voice with specified Language ID from the list of voices. If the option is not specified, the voice, defined by the option -n, or the default voice of Windows will be used.-mPrints the parameters of the voice.-b integerSets the audio output device by its index. The index of the default audio device is 0.-r textSets the audio output device by its name.-cGets the text input from the clipboard.-t text_lineGets the text input from the command line.-iGets the text input from STDIN.-oSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: writes sound data to STDOUT.
If the option is specified, the option -w is ignored.-s integerSAPI 4: sets the speed in a range of 0 to 100 (no default value).
SAPI 5 and Microsoft Speech Platform: sets the speed in a range of -10 to 10 (the default is 0).-p integerSAPI 4: sets the pitch in a range of 0 to 100 (no default value).
SAPI 5 and Microsoft Speech Platform: sets the pitch in a range of -10 to 10 (the default is 0).-v integerSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the volume in a range of 0 to 100 (the default is 100).-e integerSets the length of pauses between sentences (in milliseconds). The default is 0.-a integerSets the length of pauses between paragraphs (in milliseconds). The default is 0.-d file_nameUses a dictionary for pronunciation correction (*.BXD, *.REX or *.DIC). The command line may contain few options -d.-kKills other copies of the application in the computer's memory.-kaKills the active copy of the application in the computer's memory.-prMake pause or resume reading aloud by the active copy of the application. The action is the same as for the context menu item "Pause"/"Resume".-qAdds the utility to a queue. The application will wait until other copies of the utility have finished.-lrcSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: creates the LRC file (a file format that synchronizes text with an audio file), if the option -w or -o is specified.-srtSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: creates the SRT file (SubRip text file format), if the option -w or -o is specified.-vs file_nameSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the name of output text file with visemes, if the option -w is specified. A viseme is the mouth shape that corresponds to a particular speech sound. SAPI supports the list of 21 visemes. This list is based on the original Disney visemes. The application will create the audio file and then read it aloud to get visemes and their timecodes.-subText will be processed as subtitles.
The option may be useful, when the options -i or -c are specified.-trayShows the application's icon in the system tray. This allows to view the progress of the task. The context menu item "Stop" can be used to stop the process.-ln integerSelects a line from the text file by using of a line number. The line numbering starts at "1". The interval of numbers can be used for selecting of more than one line (for example, "26-34"). The command line may contain few options -ln.-fr integerSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the output audio sampling frequency in kHz (8, 11, 12, 16, 22, 24, 32, 44, 48). If the option is not specified, the default value for the selected voice will be used.-bt integerSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the output audio bit depth (8 or 16). If the option is not specified, the default value for the selected voice will be used.-ch integerSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the output audio channel mode (1 or 2). If the option is not specified, the default value for the selected voice will be used.-hPrints the list of available command line options.--encoding encoding or -enc encodingSets the input text encoding ("ansi", "utf8" or "unicode"). The default is "ansi".--silence-begin integer or -sb integerSets the length of silence at the beginning of the audio file (in milliseconds). The default is 0.--silence-end integer or -se integerSets the length of silence at the end of the audio file (in milliseconds). The default is 0.--lrc-length integerSets the maximal length of text lines for the LRC file (in characters).--lrc-fname file_nameSets the name of the LRC file. The option may be useful, when the option -o is specified.--lrc-enc encodingSets the encoding for the LRC file ("ansi", "utf8" or "unicode"). The default is "ansi".--lrc-offset integerSets the time shift for the LRC file (in milliseconds).--lrc-artist textSets the ID tag for the LRC file: artist.--lrc-album textSets the ID tag for the LRC file: album.--lrc-title textSets the ID tag for the LRC file: title.--lrc-author textSets the ID tag for the LRC file: author.--lrc-creator textSets the ID tag for the LRC file: creator of the LRC file.--lrc-sentInserts blank lines after sentences when creating the LRC file.--lrc-paraInserts blank lines after paragraphs when creating the LRC file.--srt-length integerSets the maximal length of text lines for the SRT file (in characters).--srt-fname file_nameSets the name of the SRT file. The option may be useful, when the option -o is specified.--srt-enc encodingSets the encoding for the SRT file ("ansi", "utf8" or "unicode"). The default is "ansi".--rawSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: output is raw PCM; audio data does not contain the WAV header. The option is used together with the option -o.--ignore-length or -ilSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: omits the length of data in the WAV header. The option is used together with the option -o.--sub-format textSets the format of subtitles ("srt", "lrc", "ssa", "ass", "smi" or "vtt"). If the option is not specified, the format will be determined through the file extension.--sub-fit or -sfSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: automatically increases the speed to fit time intervals (when the program converts subtitles to audio file).--sub-max integer or -sm integerSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the maximal speed of speech in a range of -10 to 10 (when the program converts subtitles to audio file).--delete-file or -dfRemoves the text file, when job is done. The option is used together with the option -f.--ignore-square-brackets or -isbIgnore text in [square brackets].--ignore-curly-brackets or -icbIgnore text in curly brackets.--ignore-angle-brackets or -iabIgnore text in .--ignore-round-brackets or -irbIgnore text in (round brackets).--ignore-url or -iuIgnore URLs.--ignore-comments or -icIgnore comments in text. Single-line comments start with // and continue until the end of the line. Multiline comments start with /* and end with */.--voice1-name voice_nameSAPI 4: not used.
SAPI 5 and Microsoft Speech Platform: sets the additional voice name to read foreign words in text (the part of the name will be enough). The option is used together with the option --voice1-langid. Other voices can be set by options --voice2-name, --voice3-name, etc.--voice1-langid language_idSets the language ID for foreign words in text. The option is used together with the option --voice1-name. The command line may contain more than one option --voice1-langid. Also an option may contain a comma-separated list of IDs.

The list of supported language IDs is based on ISO 639-1 codes: am, ar, az, ba, bg, be, ca, cs, cu, cv, da, de, el, en, es, et, eu, fi, fil, fr, ja, he, hi, hr, hu, hy, it, gn, gu, ka, kk-Cyr, kk-Lat, kn, ko, ky, lo, lt, lv, mk, no, pl, pt, ro, ru, sk, sl, sr-Cyr, sr-Lat, sv, tg, th, tr, tt, uk, zh.--voice1-rate integerSets the rate for the additional voice in a range of -10 to 10 (the default is 0).--voice1-pitch integerSets the pitch for the additional voice in a range of -10 to 10 (the default is 0).--voice1-volume integerSets the volume for the additional voice in a range of 0 to 100 (the default is 100).--voice1-romanUse the default voice to read Roman numerals in text. If text with non-Latin characters contains Roman numerals, the application will not change a voice to read them.--voice1-digitUse the default voice to read numbers in text. If the option is not specified, the additional voice will read numbers near foreign words.--voice1-length integerSet the minimal length of foreign text parts that will be read by the additional voice (in characters).
eebf2c3492