Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Ranger airbag code 25

183 views
Skip to first unread message

yesple...@gmail.com

unread,
Jul 6, 2008, 11:04:24 AM7/6/08
to
I have a 98 Ranger blinking airbag code 25. I understand that that
message indicates that there is a Pass Air Bag Deactivation (PAD)
Switch Fault. My question is: with this fault, is my passenger airbag
activated or deactivated. When my wife goes to her part time job, I
occasionally bring my daughter (in a car seat) with me if I need to
run an errand, but will not bring her in the truck until I know for
sure whether the airbag is active or not.

C. E. White

unread,
Jul 7, 2008, 9:08:51 AM7/7/08
to
If you have a code and the light is on, your airbags are deactivated
(both of them). On our 1999 Ranger when we got this code the actual
problem was that the LED that illuminates when the passenger side air
bag is deactivated burned out. I replaced the switch module that
includes the LED, and the code was cleared. It is an easy repair. If I
had been more adventurous, I would have tried just soldering in a new
LED. Instead I bought the whole module (switch plus LED). The cost is
around $57.82 from a dealer (ask for a passenger side air bag
deactivator switch).

Regards,

Ed White

<yesple...@gmail.com> wrote in message
news:c4253070-4815-43ca...@x35g2000hsb.googlegroups.com...

yesple...@gmail.com

unread,
Jul 7, 2008, 3:54:13 PM7/7/08
to
Thanks Ed,

That was very helpful. Is the switch acually what I put my key in to
turn it off?

C. E. White

unread,
Jul 7, 2008, 4:25:13 PM7/7/08
to

<yesple...@gmail.com> wrote in message
news:b1e2de19-2078-4949...@z72g2000hsb.googlegroups.com...

> Thanks Ed,
>
> That was very helpful. Is the switch acually what I put my key in to
> turn it off?

Yes

Ed


0 new messages