Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Hole saw
1 view
Skip to first unread message
Leodbd
Jun 26, 2017, 9:14:03 AM6/26/17
to
Which he saw is best for cutting into a 600mm cast iron sewer I need 5 inch
cutter
Thanks
--
for full context, visit https://www.homeownershub.com/tools/hole-saw-962-.htm
cutter
Thanks
--
for full context, visit https://www.homeownershub.com/tools/hole-saw-962-.htm
Iggy
Aug 14, 2017, 12:14:03 AM8/14/17
to
replying to Leodbd, Iggy wrote:
None, because you don't. You use proper fittings and sealing methods. Cast
Iron is very brittle and needs a quite deep stub to seal into (jute and molten
lead) or onto (rubber sleeve). Putting any lateral strain within a section of
pipe will result in a crack and that section will then be entirely useless.
None, because you don't. You use proper fittings and sealing methods. Cast
Iron is very brittle and needs a quite deep stub to seal into (jute and molten
lead) or onto (rubber sleeve). Putting any lateral strain within a section of
pipe will result in a crack and that section will then be entirely useless.
0 new messages