Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Venus 2000
1,381 views
Skip to first unread message
pgor...@webtv.net
Apr 1, 2009, 4:25:57 PM4/1/09
to
Guys, I would like to sell my Venus 2000,
male milking machine.......
and a metal chastity jock belt......And about 10
bike jock straps. Plus two different boxer
jock straps........
Any takers????????
male milking machine.......
and a metal chastity jock belt......And about 10
bike jock straps. Plus two different boxer
jock straps........
Any takers????????
Peter
john G
Apr 1, 2009, 6:03:13 PM4/1/09
to
tedwh...@sbcglobal.net
Apr 1, 2009, 7:49:47 PM4/1/09
to
How about the 10 bike jocks ? What size are they? How much are they
worth to you ? What shape are they in ?
ted
pgor...@webtv.net
Apr 2, 2009, 11:26:47 AM4/2/09
to
They say they are large and medium. But
I believe they are on the small side. Excellent
shape. Because I don't believe I ever used them. They were to small for
me. Four dollars each, but I find there are only seven and not ten. So
they would be a total of $28.00 for the
7.
I believe they are on the small side. Excellent
shape. Because I don't believe I ever used them. They were to small for
me. Four dollars each, but I find there are only seven and not ten. So
they would be a total of $28.00 for the
7.
Peter
pgor...@webtv.net
Apr 2, 2009, 11:37:42 AM4/2/09
to
You can see a picture of my metal chastity
jock in Mr. Leather. It is the CB250, The Cock
Vault.
The boxer jocks are: The Contender, the Profect---Force88. Also I have a
JOFA to
sell.
jock in Mr. Leather. It is the CB250, The Cock
Vault.
The boxer jocks are: The Contender, the Profect---Force88. Also I have a
JOFA to
sell.
Please email direct, if interested.
Peter
pgor...@webtv.net
Apr 2, 2009, 12:23:48 PM4/2/09
to
Sorry it is the CB245 and NOT the CB250.
They are very similar. The difference is the
different locks being used.
They are very similar. The difference is the
different locks being used.
Peter
john G
Apr 3, 2009, 9:26:20 AM4/3/09
to
pgor...@webtv.net
Apr 3, 2009, 1:38:23 PM4/3/09
to
I'm asking a $100.00 less then the price ($420.00) from Mr. Leather. I
find the waist size can be anything from small to large, as it is a
belt with notches......But if you are very small
under 28 inch waist, or over say a 50 plus
inch waist. This might not fit you.
My price, $320.00.
find the waist size can be anything from small to large, as it is a
belt with notches......But if you are very small
under 28 inch waist, or over say a 50 plus
inch waist. This might not fit you.
My price, $320.00.
Please email direct if interested.
Peter
pgor...@webtv.net
Apr 3, 2009, 6:50:38 PM4/3/09
to
ps
I feel $100.00 less from Mr. Leather is not bad.
You will never get a discount of a 100 bucks
less from Mr. Leather.
Peter
pgor...@webtv.net
Apr 3, 2009, 7:08:52 PM4/3/09
to
I might sell my collection of Banana cups
at 150.00. Not even sure you can buy Banana cups. Plus the clear plastic
Banana cup with the jock that is cut out to show the clear plastic
cup......
at 150.00. Not even sure you can buy Banana cups. Plus the clear plastic
Banana cup with the jock that is cut out to show the clear plastic
cup......
JOCK
Apr 4, 2009, 1:36:01 PM4/4/09
to
pgor...@webtv.net
Apr 6, 2009, 9:51:29 AM4/6/09
to
Sorry Jock, these have been already sold as a set.
Thanks
Peter
pgor...@webtv.net
Apr 6, 2009, 2:08:12 PM4/6/09
to
Jock, I might have one yellow banana
cup left. Not even sure I have the jock for it.
The set, some were not even taken out of
the bag...... (Way back when, the Banana cup
was sent it was sent in a bag, not a box.)
Email me direct, if intersected.......
cup left. Not even sure I have the jock for it.
The set, some were not even taken out of
the bag...... (Way back when, the Banana cup
was sent it was sent in a bag, not a box.)
Email me direct, if intersected.......
Peter
painbe...@gmail.com
Jun 25, 2012, 6:22:12 AM6/25/12
to
painbe...@gmail.com
Jun 25, 2012, 6:56:27 AM6/25/12
to
On Thursday, April 2, 2009 7:25:57 AM UTC+11, (unknown) wrote:
> Peter
John
Jun 25, 2012, 2:15:34 PM6/25/12
to
What kind of chastity belt are you selling, and what is it's size?
abua...@gmail.com
Jul 3, 2014, 8:33:45 PM7/3/14
to
I seem to have gotten there, with even less ado and expenses:
After more than a year's of trial and error, I finally got my Venus2K clone act together and it's really excellent!
It's that good that even changed its name to: "Sophie 2000" :)
The hardest thing was to find a strong, reciprocating motor cheaply. Finally, an $US80 (incl. shipping) Chi machine did it:
I swapped its motor for a Dodge window wiper motor and adapted the quite, geared Chi motor to my project, Now I have got both, the Chi machine and the Venus 2K clone working!
My "Sophie 2000" consists of:
1. Chi motor 220VDC (consuming 2A5= 550W of 22oV AC)
2. Pneumatic Cylinder 50x50mm (50mm stroke) $US30
3. Adjustable air valve
4. One-way air valve
3. Bridge Rectifier
4. 47uF/400V Electrolytic
5. Switch
6. Lamp Dimmer for 60 rpm (snail) to 280 rpm (rabbit)
I mounted all parts onto small piece of plywood and glued a piece of firm rubber foam underneath.
For frequent and comfortable use, I suspend the receiver onto a type of wooden bridge/ frame with a leather swing or place it between 3.5Kg of (cut-open) silicon buttocks, I used for years before and thus, put them to good use by enjoying something soft to hold on...
Result: The pumping action then pivots the whole silicon bum at the table's edge up and down, cradling the scrotum. - I can only describe the physical sensation as "ravingly insane!"
For best lubrication I regularly prepare a 1 liter bottle of Xanthan Gum + Guar Gum + water mix with a pinch of salt (as preservative). Even at +36°C it never turned bad.
The receiver housing I build myself from a tough, flexible (medical pill container) plastic tube, sanding its edges super smooth. Try different sizes...
As liner I use bicycle inner tubing 29 x 2.3 inches. Its firmness is welcome, for its pressure degree I control via that adjustable air valve.
To lubricate the motor's gearbox and the crank assembly, I use gun oil-thinned graphite grease or silicon spray. To lubricate the air cylinder's o-rings, I use special rubber grease.
Frankly, I don't think I can be happy anymore without my "Sophie"! Now at a young pensioner (71) I almost daily enjoy poking my new, hot "Sophie"! My dear wife is getting on in age and I hate to molest her with my sexy desires... So, I'm quite happy to share my physical joys with motorized Sophie and the exchange of virtues with my dear wife. That also keeps me home, safe from HIV/ AIDS! Last, not least benefiting my prostate it saves me bundles of money... End of my sexy problems!
Even though it works fantastically, I enjoy improving it. For instance:
1) Now I plan to build a light weight, small size "traveler version".
2) I now adapted the Japanese Rends Piston Liner and use it as the Receiver cup. It's even more effective and longer lasting than any rubber tubing.
After more than a year's of trial and error, I finally got my Venus2K clone act together and it's really excellent!
It's that good that even changed its name to: "Sophie 2000" :)
The hardest thing was to find a strong, reciprocating motor cheaply. Finally, an $US80 (incl. shipping) Chi machine did it:
I swapped its motor for a Dodge window wiper motor and adapted the quite, geared Chi motor to my project, Now I have got both, the Chi machine and the Venus 2K clone working!
My "Sophie 2000" consists of:
1. Chi motor 220VDC (consuming 2A5= 550W of 22oV AC)
2. Pneumatic Cylinder 50x50mm (50mm stroke) $US30
3. Adjustable air valve
4. One-way air valve
3. Bridge Rectifier
4. 47uF/400V Electrolytic
5. Switch
6. Lamp Dimmer for 60 rpm (snail) to 280 rpm (rabbit)
I mounted all parts onto small piece of plywood and glued a piece of firm rubber foam underneath.
For frequent and comfortable use, I suspend the receiver onto a type of wooden bridge/ frame with a leather swing or place it between 3.5Kg of (cut-open) silicon buttocks, I used for years before and thus, put them to good use by enjoying something soft to hold on...
Result: The pumping action then pivots the whole silicon bum at the table's edge up and down, cradling the scrotum. - I can only describe the physical sensation as "ravingly insane!"
For best lubrication I regularly prepare a 1 liter bottle of Xanthan Gum + Guar Gum + water mix with a pinch of salt (as preservative). Even at +36°C it never turned bad.
The receiver housing I build myself from a tough, flexible (medical pill container) plastic tube, sanding its edges super smooth. Try different sizes...
As liner I use bicycle inner tubing 29 x 2.3 inches. Its firmness is welcome, for its pressure degree I control via that adjustable air valve.
To lubricate the motor's gearbox and the crank assembly, I use gun oil-thinned graphite grease or silicon spray. To lubricate the air cylinder's o-rings, I use special rubber grease.
Frankly, I don't think I can be happy anymore without my "Sophie"! Now at a young pensioner (71) I almost daily enjoy poking my new, hot "Sophie"! My dear wife is getting on in age and I hate to molest her with my sexy desires... So, I'm quite happy to share my physical joys with motorized Sophie and the exchange of virtues with my dear wife. That also keeps me home, safe from HIV/ AIDS! Last, not least benefiting my prostate it saves me bundles of money... End of my sexy problems!
Even though it works fantastically, I enjoy improving it. For instance:
1) Now I plan to build a light weight, small size "traveler version".
2) I now adapted the Japanese Rends Piston Liner and use it as the Receiver cup. It's even more effective and longer lasting than any rubber tubing.
sendlb...@gmail.com
Jan 2, 2018, 8:17:22 PM1/2/18
to
sendlb...@gmail.com
Jan 2, 2018, 8:18:20 PM1/2/18
to
On Wednesday, April 1, 2009 at 4:25:57 PM UTC-4, pgor...@webtv.net wrote:
dicka...@gmail.com
Oct 22, 2018, 8:36:35 AM10/22/18
to
On Wednesday, April 1, 2009 at 3:25:57 PM UTC-5, pgor...@webtv.net wrote:
> Guys, I would liketheto sell my Venus 2000,
> male milking machine.......
> and a metal cha ???????
>
> Peter
how much for the venus 250.00
> Guys, I would liketheto sell my Venus 2000,
> male milking machine.......
> and a metal cha ???????
>
> Peter
how much for the venus 250.00
cmf...@gmail.com
Jan 5, 2019, 3:05:23 AM1/5/19
to
Still have the venus? Is it compete?
250? Send me a pict of the machine and accessories.
Cash readu
250? Send me a pict of the machine and accessories.
Cash readu
rekru...@gmail.com
Feb 21, 2019, 9:02:44 AM2/21/19
to
josephp...@gmail.com
Feb 27, 2019, 7:54:50 AM2/27/19
to
0 new messages