Adding Disk Drives to X3-L2 Server

[Harold Worby]

I have a X3-L2 server and added 2 drives ( HD-7 and HD-8 )
I want to access the raw discs via /dev/rdsk and /dev/dsk
I ran devfsadm but the drives do not show up.
In the LOM console the drives show as installed.
What do I need to do to make the visible to the OS (Solaris 10)?
I was expecting /dev/dsk/c0t6d0 and /dev/dsk/c0t7d0


echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 36094 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,3c0a@3,2/pci1000,9263@0/sd@0,0
1. c0t1d0 <LSI-MR9261-8i-2.12 cyl 36094 alt 2 hd 255 sec 63> solaris
/pci@0,0/pci8086,3c0a@3,2/pci1000,9263@0/sd@1,0
2. c0t2d0 <LSI-MR9261-8i-2.12 cyl 36094 alt 2 hd 255 sec 63> solaris
/pci@0,0/pci8086,3c0a@3,2/pci1000,9263@0/sd@2,0
3. c0t3d0 <LSI-MR9261-8i-2.12 cyl 36094 alt 2 hd 255 sec 63> solaris
/pci@0,0/pci8086,3c0a@3,2/pci1000,9263@0/sd@3,0
4. c0t4d0 <LSI-MR9261-8i-2.12 cyl 36094 alt 2 hd 255 sec 63> solaris
/pci@0,0/pci8086,3c0a@3,2/pci1000,9263@0/sd@4,0

The system had drives 0-5 installed, I added 6 & 7
1,2,3,4 are in a Disk Suite Raid-5 configuration

# metastat
d100: RAID
State: Okay
Interlace: 32 blocks
Size: 1739148705 blocks (829 GB)
Original device:
Size: 1739163744 blocks (829 GB)
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s0 330 No Okay Yes
c0t2d0s0 330 No Okay Yes
c0t3d0s0 330 No Okay Yes
c0t4d0s0 330 No Okay Yes

Device Relocation Information:
Device Reloc Device ID
c0t1d0 Yes id1,sd@n600605b005352e801833ce6424e3259c
c0t2d0 Yes id1,sd@n600605b005352e801833ce672518dd95
c0t3d0 Yes id1,sd@n600605b005352e801833ce6e257d3604
c0t4d0 Yes id1,sd@n600605b005352e801833ce7125a6d89e

[cjt]

The easiest way, if your circumstances allow a reboot, is probably to
touch /reconfigure
and reboot.