Programming fbii xl2t chime

[Rex]

Can I program my fbii xl2t to chime when the exterior doors are opened in the
off mode? If so can someone give the key code?
Thanks

--
posted via
http://forums.cabling-design.com/security-physical/programming-fbii-xl2t-chime-62775-.htm
using Cabling-Design's Web, RSS and Social Media Interface to
alt.security.alarms and other telecom groups

[Jim]

On Thursday, August 1, 2013 12:44:00 PM UTC-4, Rex wrote:
> Can I program my fbii xl2t to chime when the exterior doors are opened in the off mode? If so can someone give the key code? Thanks --

I haven't installed an FBII unit in a long time and I know what an XL2 is but I don't know what the additional " t " signifies. However, in the XL2 units, when programing the panel during installation, you must choose a "zone type". One of the types include having the zone chime when the system is disarmed and when you open the zone. As far as I can remember there was never an option at the keypad to turn the chime function on and off.

[Bob La Londe]

"Jim" <alar...@aol.com> wrote in message
news:a0483d0a-6838-40d4...@googlegroups.com...

If zones are programmed for chime then chime can be turned on and off at the
keypad using # 6 with the 2S 2G & 2T models. I do not remember if that
ability was present in an original 2 or 4600.

Zones can only be programmed for chime in dealer programming.

[RockyTSquirrel]

also xl-2P, xl-31 and xl-4

# and 6 chime on or off...



"Bob La Londe" wrote in message news:4WVKt.387722$T55.3...@fx16.iad...

[Jim]

On Friday, August 2, 2013 5:56:18 PM UTC-4, Bob La Londe wrote:
If zones are programmed for chime then chime can be turned on and off at the keypad using # 6 with the 2S 2G & 2T models. I do not remember if that ability was present in an original 2 or 4600. Zones can only be programmed for chime in dealer programming.

I only ever installed the original 4600 and XL2. Those didn't have keypad control of the chime mode.