Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Vista-32fb Message 'Notifying central station.

2,096 views
Skip to first unread message

dylan...@gmail.com

unread,
Mar 6, 2013, 2:49:16 PM3/6/13
to
I've tried to setup new system 'vista 32fb'. After inputting zone setting and installer code and tel number, I got out of from the programming mode.

When I tried to re-enter programming mode;resetting power and installer code + 800, it showed me a message "Notifying Central Station" I cannot enter any code after. All I have to do is reset power.

But when I tried to go into the mode. Same situation. I really want to know how to get rid of this messages.

Thanks.

NickMark

unread,
Mar 6, 2013, 5:49:19 PM3/6/13
to
This is a feature that any time you try to go into programming it contacts and tells central station first if panel is not hooked to phone line and programmed you have to wait it out about 3 minutes till it trys all attempts then lets you get in . It can be taken out of programming at field 1 *12 hit # 94 to get to next page then * 12 and enter 0 in field

Rick

unread,
Aug 11, 2022, 6:00:31 PM8/11/22
to
Definitely NOT correct in 2022… I have been waiting for 25 minutes and it still shows “Notifying Centrl Station”…and I have been on hold with Residio Tech Support for the same 25 minutes. Completely WORTHLESS and PATHETIC company !!

--
For full context, visit https://forums.cabling-design.com/security-physical/vista-32fb-message-notifying-central-station-62364-.htm

mleuck

unread,
Aug 13, 2022, 2:45:33 PM8/13/22
to
It is correct try cycling power to the panel

Johnell Stephens

unread,
Nov 30, 2022, 12:14:28 PM11/30/22
to
There is a location in programming to disable this feature. I'm not sure of the location but its in the manual
0 new messages