Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

ademco vista 12D reporting

20 views
Skip to first unread message

spyros

unread,
Mar 23, 2022, 11:24:04 AM3/23/22
to
Ademco Vista 12D reports only Z4 (cid format) All the other zones 1,2,3,5,6 when triggered dont send report to arc... any idea? thanks in advance...

KJ7BZC

unread,
Mar 23, 2022, 5:44:27 PM3/23/22
to
On Wednesday, March 23, 2022 at 8:24:04 AM UTC-7, spyros wrote:
> Ademco Vista 12D reports only Z4 (cid format) All the other zones 1,2,3,5,6 when triggered dont send report to arc... any idea? thanks in advance...

Not familiar with a Vista 12D in particular, but most the Ademco panels need to have the two-digit report code set to something other than 00 for the zone to generate reports. Perhaps try changing that for each zone that isn’t reporting?

Keith

mleuck

unread,
Mar 23, 2022, 7:15:21 PM3/23/22
to
On Wednesday, March 23, 2022 at 10:24:04 AM UTC-5, spyros wrote:
> Ademco Vista 12D reports only Z4 (cid format) All the other zones 1,2,3,5,6 when triggered dont send report to arc... any idea? thanks in advance...

According to the manual all sensors send whatever format is set in *48 including CSID, don't know what you mean by the other zones not reporting

spyros

unread,
Mar 23, 2022, 11:59:52 PM3/23/22
to
i programm report code as 11 (BB) on any zone from 1 to 6 but it reports alarm only zone 4...

mleuck

unread,
Mar 24, 2022, 1:28:32 AM3/24/22
to
Should work fine programmed that way for any report code, its something else

RTS

unread,
Mar 24, 2022, 3:56:45 AM3/24/22
to
not familiar with a vista 12D
but each zone should be programed as something,
(01-door,02-door, 03-permeter, 04-motion,etc...)

If there is still 00 in that slot then it will not report..

Then there should be a reporting code,
(01 - 0E)

this site has the full programming manual if you don't
have a copy...

https://www.manualslib.com/manual/830459/Honeywell-Ademco-Vista-12d.html#manual

RTS

--

*Rocky T. Squirrel, esq.*

0 new messages