RF output from sky box , where does it go ?

[Londoncalling]

Ok , sky dish , input in , great picture all is well :-)

Upstairs I have small flatscreen TV , with digital scanner
built withihn the unit

Ok the extension tv cable i have from downstairs to upstairs
i *thought* would be ideal for attaching to RF output
at back of sky box , for getting somekind of tv channel upstairs
even is its simply a reopeat of downstairs channel

Anyways , zilch , zero , nadda , cant find any channel output
at all

SO these things of back of sky with
RF output 1
RF output 2

what do they do ? if they push out a signal
where can iot now be found on TV spectrum
within the digital band or analogue , common
sense says it should be analogue , if so roughly please
where in the spec should it be

ANy ideas why im picking up zilch


--
----------------
No links here , nup

[Demonic]

It is an analogue output in the UHF band (Ch21-69 )can be set up using a
hidden menu. http://www.digitalsat.co.uk/skyinstallersmenu.html refers.

It is possible that the channel is set to one inm use in your area
(analogue or digital) so you need to change it to a clean channel.

[GeoffC]

On 22/03/2012 14:47, Londoncalling wrote:

You may be trying to put an analog signal from the Sky box into an
all-digital TV! If not, you need to ensure that the TV is looking at the
same channel that the box emits (e.g. ch.36)

[Londoncalling]

Issue resolved

Errr , turns out the TV has two separate ariel inputs
one for analogue TV , one for Digital TV

its all working now

:-)

--
----------------
No links here , nup

"Londoncalling" <london...@btopenworld.com> wrote in message
news:Hs-dnUgHPtwNpvbS...@bt.com...

[R. Mark Clayton]

Refreshing frankness, but then we have all made mistakes like this...

"Londoncalling" <london...@btopenworld.com> wrote in message

news:d7GdnTkG8IVz7ejS...@bt.com...