info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
OMNIMIX: HOW TO REENABLE A NYM ACCOUNT DISABLED
48 views
Skip to first unread message
Fritz Wuehler
Feb 21, 2024, 2:59:25 AMFeb 21
to
Help.
I received this message from my nym server:
=======================
You have sent sent or received enough mail in one day to exceed the
maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
has therefore been disabled.
Please check to make sure this isn't a configuration error or a loop
in your reply block. To reenable your mail alias account, you must
send the following commands, PGP signed and encrypted, to
<con...@nymph.paranoici.org>:
Config:
From: myalias
Nym-Command: -disable
=======================
Well, I went to Mailer tab and I composed a message like this
Destination: con...@nymph.paranoici.org
References:
Subject: Hi
Anon From: mya...@nymph.paranoici.org
M2N Gate:
Remailer: ****
Additional Headers:
and in the box Body:
Config:
From: thegoodstudent
Nym-Command: -disable
I sent it and I received this answer
(it seems that my message did not work):
========================================
This is to acknowledge that a message with the following header was
NOT remailed under your pseudonym:
X-Nym-Disclaimer: This message was sent anonymously through
the nymph.paranoici.org Nymserver.
Please report abuse to postm...@nymph.paranoici.org
From: myalias <mya...@nymph.paranoici.org>
To: con...@nymph.paranoici.org
Subject: Hi
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Hashcash:
1:24:240218:con...@nymph.paranoici.org::+OrcgjnJOfRBSwON:0000000000000000000000000000000000088Sx
X-PGP-Key-Public: 0xXXXXXXXXXXXXXXXX
mQI
(cut my public key)
=FEcL
Some problems were encountered with your message:
Your nym account is disabled.
Send -disable Nym-Command to reenable.
===========================================
Some suggestions?
I received this message from my nym server:
=======================
You have sent sent or received enough mail in one day to exceed the
maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
has therefore been disabled.
Please check to make sure this isn't a configuration error or a loop
in your reply block. To reenable your mail alias account, you must
send the following commands, PGP signed and encrypted, to
<con...@nymph.paranoici.org>:
Config:
From: myalias
Nym-Command: -disable
=======================
Well, I went to Mailer tab and I composed a message like this
Destination: con...@nymph.paranoici.org
References:
Subject: Hi
Anon From: mya...@nymph.paranoici.org
M2N Gate:
Remailer: ****
Additional Headers:
and in the box Body:
Config:
From: thegoodstudent
Nym-Command: -disable
I sent it and I received this answer
(it seems that my message did not work):
========================================
This is to acknowledge that a message with the following header was
NOT remailed under your pseudonym:
X-Nym-Disclaimer: This message was sent anonymously through
the nymph.paranoici.org Nymserver.
Please report abuse to postm...@nymph.paranoici.org
From: myalias <mya...@nymph.paranoici.org>
To: con...@nymph.paranoici.org
Subject: Hi
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Hashcash:
1:24:240218:con...@nymph.paranoici.org::+OrcgjnJOfRBSwON:0000000000000000000000000000000000088Sx
X-PGP-Key-Public: 0xXXXXXXXXXXXXXXXX
mQI
(cut my public key)
=FEcL
Some problems were encountered with your message:
Your nym account is disabled.
Send -disable Nym-Command to reenable.
===========================================
Some suggestions?
elon
Feb 21, 2024, 5:46:58 PMFeb 21
to
In <1ea69331547884d7...@msgid.frell.theremailer.net>
> Some problems were encountered with your message:
>
> Your nym account is disabled.
> Send -disable Nym-Command to reenable.
>
> ===========================================
>
> Some suggestions?
Did you reenable?
> Some problems were encountered with your message:
>
> Your nym account is disabled.
> Send -disable Nym-Command to reenable.
>
> ===========================================
>
> Some suggestions?
Stainless Steel Rat
Feb 22, 2024, 3:18:00 AMFeb 22
to
On Wed, 21 Feb 2024 08:58:49 +0100, Fritz Wuehler <fr...@spamexpire-202402.rodent.frell.theremailer.net>
said:
> Help.
> I received this message from my nym server:
> =======================
> You have sent sent or received enough mail in one day to exceed the
> maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
> has therefore been disabled.
I've been using nyms for decades and I've never run into this problem.
Either you're being mailbombed or you have a problem with your reply block.
> Please check to make sure this isn't a configuration error or a loop
> in your reply block. To reenable your mail alias account, you must
> send the following commands, PGP signed and encrypted, to
> <con...@nymph.paranoici.org>:
>
> Config:
> From: myalias
> Nym-Command: -disable
>
> [snip]
>
> Some suggestions?
It appears that you're trying to use a disabled nym account to send an email
message to Paranoici's Config: address. That is why your attempt to fix this
has failed.
There are a few different ways to go here:
1) Setup another nym and use that to send to the Config: address
2) Use a remailer (e.g.Dizum, or Frell) to send to the Config: address.
It doesn't matter /how/ the signed configuration message reaches the
nymserver, all that matters is that it gets there. If the signature is valid,
the message will be acted-upon, regardless of how it gets there.
Stainless Steel Rat
said:
> Help.
> I received this message from my nym server:
> =======================
> You have sent sent or received enough mail in one day to exceed the
> maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
> has therefore been disabled.
Either you're being mailbombed or you have a problem with your reply block.
> Please check to make sure this isn't a configuration error or a loop
> in your reply block. To reenable your mail alias account, you must
> send the following commands, PGP signed and encrypted, to
> <con...@nymph.paranoici.org>:
>
> Config:
> From: myalias
> Nym-Command: -disable
>
>
> Some suggestions?
It appears that you're trying to use a disabled nym account to send an email
message to Paranoici's Config: address. That is why your attempt to fix this
has failed.
There are a few different ways to go here:
1) Setup another nym and use that to send to the Config: address
2) Use a remailer (e.g.Dizum, or Frell) to send to the Config: address.
It doesn't matter /how/ the signed configuration message reaches the
nymserver, all that matters is that it gets there. If the signature is valid,
the message will be acted-upon, regardless of how it gets there.
Stainless Steel Rat
Yamn2 Remailer
Feb 22, 2024, 9:23:08 AMFeb 22
to
Fritz Wuehler wrote:
>Help.
>I received this message from my nym server:
>=======================
>You have sent sent or received enough mail in one day to exceed the
>maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
>has therefore been disabled.
>
>Please check to make sure this isn't a configuration error or a loop
>in your reply block. To reenable your mail alias account, you must
>send the following commands, PGP signed and encrypted, to
><con...@nymph.paranoici.org>:
>
>Config:
>From: myalias
>Nym-Command: -disable
>=======================
[...]
>Help.
>I received this message from my nym server:
>=======================
>You have sent sent or received enough mail in one day to exceed the
>maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
>has therefore been disabled.
>
>Please check to make sure this isn't a configuration error or a loop
>in your reply block. To reenable your mail alias account, you must
>send the following commands, PGP signed and encrypted, to
><con...@nymph.paranoici.org>:
>
>Config:
>From: myalias
>Nym-Command: -disable
>=======================
>Some problems were encountered with your message:
>
>Your nym account is disabled.
>Send -disable Nym-Command to reenable.
>
>===========================================
>
>Some suggestions?
Open the Nym Configurator
>
>Your nym account is disabled.
>Send -disable Nym-Command to reenable.
>
>===========================================
>
>Some suggestions?
Select your nym account
Check the 'Disable' box on the right
Click 'Modify'
Close the Nym Configurator
Select 'Modify the selected nym account'
Click 'Send Msg'
Wait for the config reply and confirm it
Don't forget to finally uncheck your nym's 'Disable' box
Yamn2 Remailer
Feb 22, 2024, 9:38:08 AMFeb 22
to
I wrote:
Leave the nym account's 'Disable' box unchecked !!!
Send a 'Modify the selected nym account' configuration message.
Wait for the config reply and confirm it.
Sorry!
>Fritz Wuehler wrote:
>
>>Help.
>>I received this message from my nym server:
>>=======================
>>You have sent sent or received enough mail in one day to exceed the
>>maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
>>has therefore been disabled.
>>
>>Please check to make sure this isn't a configuration error or a loop
>>in your reply block. To reenable your mail alias account, you must
>>send the following commands, PGP signed and encrypted, to
>><con...@nymph.paranoici.org>:
>>
>>Config:
>>From: myalias
>>Nym-Command: -disable
>>=======================
>[...]
>
>>Help.
>>I received this message from my nym server:
>>=======================
>>You have sent sent or received enough mail in one day to exceed the
>>maximum daily limit. Your alias account <mya...@nymph.paranoici.org>
>>has therefore been disabled.
>>
>>Please check to make sure this isn't a configuration error or a loop
>>in your reply block. To reenable your mail alias account, you must
>>send the following commands, PGP signed and encrypted, to
>><con...@nymph.paranoici.org>:
>>
>>Config:
>>From: myalias
>>Nym-Command: -disable
>>=======================
>>Some problems were encountered with your message:
>>
>>Your nym account is disabled.
>>Send -disable Nym-Command to reenable.
>>
>>===========================================
>>
>>Some suggestions?
>
>>
>>Your nym account is disabled.
>>Send -disable Nym-Command to reenable.
>>
>>===========================================
>>
>>Some suggestions?
>
>Open the Nym Configurator
>Select your nym account
>Check the 'Disable' box on the right
>Click 'Modify'
>Close the Nym Configurator
>Select 'Modify the selected nym account'
>Click 'Send Msg'
>Wait for the config reply and confirm it
>Don't forget to finally uncheck your nym's 'Disable' box
Much easier:
>Select your nym account
>Check the 'Disable' box on the right
>Click 'Modify'
>Close the Nym Configurator
>Select 'Modify the selected nym account'
>Click 'Send Msg'
>Wait for the config reply and confirm it
>Don't forget to finally uncheck your nym's 'Disable' box
Leave the nym account's 'Disable' box unchecked !!!
Send a 'Modify the selected nym account' configuration message.
Wait for the config reply and confirm it.
Sorry!
Fritz Wuehler
Feb 22, 2024, 10:03:34 AMFeb 22
to
> I've been using nyms for decades and I've never run into this problem.
> Either you're being mailbombed or you have a problem with your reply block.
>
It worked very well for two years.
> Either you're being mailbombed or you have a problem with your reply block.
>
I had to send about 40 mail in the same day and after this it was
disabled.
>
> 2) Use a remailer (e.g.Dizum, or Frell) to send to the Config: address.
>
0 new messages