Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Leap-15.5 Yast>SoftwareManagment hangs

47 views
Skip to first unread message

bad sector

unread,
Jul 25, 2023, 12:17:50 PM7/25/23
to

It hangs infinitely the GUI way

Via cLi...

# yast2 repositories
WARNING: Nokogiri was built against LibXML version 2.9.14, but has
dynamically loaded 2.10.3

and hangs there infinitely



bad sector

unread,
Jul 25, 2023, 12:56:06 PM7/25/23
to
after disabling the gnome repo I still getthet message but the yast
software module comes up OK. Same after RE-enabling the gnome repo.

But I'm back to somethinglike the other post about updatye refusal:

With the gnome repo enabled
===========================

# zypper up
Loading repository data...
Reading installed packages...

The following 17 items are locked and will not be changed by any action:
Available:
kwalletd5-lang kwallet-devel kwallet-devel-32bit kwalletmanager5
kwalletmanager5-lang kwallet-tools kwallet-tools-lang
libkwalletbackend5-5-32bit libsvn_auth_kwallet-1-0
nvidia-computeG05-32bit nvidia-glG05-32bit pam_kwallet pam_kwallet-32bit
pam_kwallet-common remmina-plugin-kwallet signon-kwallet-extension
x11-video-nvidiaG05-32bit

The following ****77 package updates**** will NOT be installed:
chromium-uget-integrator easytag easytag-lang firefox-uget-integrator
gcab gcab-lang geany geany-lang gnumeric gnumeric-doc
gnumeric-lang goffice-lang gstreamer-plugin-pipewire gtick gtick-lang
gtkpod gtkpod-lang jack_mixer libatomicparsley0
libavutil55-32bit libgbm1 libgcab-1_0-0 libgeany0 libgexiv2-2
libgoffice-0_10-10 libgtkpod1 libheif1 libOSMesa8
libOSMesa-devel libpipewire-0_3-0 libqmmp-plugins libquicktime0
libswresample2-32bit libvdpau_nouveau libvdpau_r300
libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon
libxatracker2 liferea liferea-lang meld meld-lang Mesa
Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-KHR-devel Mesa-libd3d
Mesa-libEGL1 Mesa-libEGL-devel Mesa-libGL1 Mesa-libglapi0
Mesa-libGL-devel Mesa-libva Mesa-vulkan-device-select mpd
opera-uget-integrator pavumeter pipewire pipewire-alsa
pipewire-lang pipewire-modules-0_3 pipewire-spa-plugins-0_2
pipewire-spa-tools pipewire-tools sylpheed transmission-common
transmission-gtk transmission-gtk-lang uget uget-integrator uget-lang
xeyes yt-dlp-bash-completion yt-dlp-zsh-completion
Nothing to do.




With the gnome repo disabled
=============================


# zypper up
Loading repository data...
Reading installed packages...

The following 17 items are locked and will not be changed by any action:
Available:
kwalletd5-lang kwallet-devel kwallet-devel-32bit kwalletmanager5
kwalletmanager5-lang kwallet-tools kwallet-tools-lang
libkwalletbackend5-5-32bit libsvn_auth_kwallet-1-0
nvidia-computeG05-32bit nvidia-glG05-32bit pam_kwallet pam_kwallet-32bit
pam_kwallet-common remmina-plugin-kwallet signon-kwallet-extension
x11-video-nvidiaG05-32bit

The following ****42 package updates**** will NOT be installed:
gstreamer-plugin-pipewire jack_mixer libavutil55-32bit libgbm1
libheif1 libOSMesa8 libOSMesa-devel libpipewire-0_3-0
libqmmp-plugins libquicktime0 libswresample2-32bit libvdpau_nouveau
libvdpau_r300 libvdpau_r600 libvdpau_radeonsi
libvulkan_intel libvulkan_radeon libxatracker2 Mesa Mesa-dri
Mesa-dri-nouveau Mesa-gallium Mesa-KHR-devel Mesa-libd3d
Mesa-libEGL1 Mesa-libEGL-devel Mesa-libGL1 Mesa-libglapi0
Mesa-libGL-devel Mesa-libva Mesa-vulkan-device-select mpd pipewire
pipewire-alsa pipewire-lang pipewire-modules-0_3
pipewire-spa-plugins-0_2 pipewire-spa-tools pipewire-tools xeyes
yt-dlp-bash-completion yt-dlp-zsh-completion
Nothing to do.



Carlos E.R.

unread,
Jul 25, 2023, 1:35:53 PM7/25/23
to
On 2023-07-25 18:55, bad sector wrote:
> On 7/25/23 12:17, bad sector wrote:
>>
>> It hangs infinitely the GUI way
>>
>> Via cLi...
>>
>> # yast2 repositories
>> WARNING: Nokogiri was built against LibXML version 2.9.14, but has
>> dynamically loaded 2.10.3
>>
>> and hangs there infinitely
>
> after disabling the gnome repo I still getthet message but the yast
> software module comes up OK. Same after RE-enabling the gnome repo.
>
> But I'm back to somethinglike the other post about updatye refusal:

That "update refusal" you say doesn't have any importance, it is normal.

Anyway, upload "zypper lr --details" to susepaste, post the link here
(to avoid line wrap). Or post here if you can use loooong lines.

--
Cheers, Carlos.

Carlos E.R.

unread,
Jul 25, 2023, 1:40:54 PM7/25/23
to
On 2023-07-25 18:55, bad sector wrote:
> On 7/25/23 12:17, bad sector wrote:


> # zypper up
> Loading repository data...
> Reading installed packages...
>
> The following 17 items are locked and will not be changed by any action:
>  Available:
>   kwalletd5-lang kwallet-devel kwallet-devel-32bit kwalletmanager5
> kwalletmanager5-lang kwallet-tools kwallet-tools-lang
>   libkwalletbackend5-5-32bit libsvn_auth_kwallet-1-0
> nvidia-computeG05-32bit nvidia-glG05-32bit pam_kwallet pam_kwallet-32bit
>   pam_kwallet-common remmina-plugin-kwallet signon-kwallet-extension
> x11-video-nvidiaG05-32bit

Why do you have nvidia packages locked?

Undo that.

--
Cheers, Carlos.

bad sector

unread,
Jul 25, 2023, 1:55:41 PM7/25/23
to
Mostly I just disable the nvidia repo on account that far too often
their crappy repo is either slower than a dead fucking dog or it just
plain grinds to a halt and if I happen to be using zypper at the time
that's very likely to crash the whole parade! Remind me never to buy
anything that smells of nvidia again.


> Undo that.

OK it was 3 32 bit packages, I returned status to do not install so if
anything needs them as a depend it'll get them



bad sector

unread,
Jul 25, 2023, 1:55:48 PM7/25/23
to
On 7/25/23 13:34, Carlos E.R. wrote:
> "zypper lr --details"

1 week
https://paste.opensuse.org/pastes/770d402e0fa0


Carlos E.R.

unread,
Jul 25, 2023, 6:16:31 PM7/25/23
to
The "name" column is very strange, I've never seen one like that.



What's in leap-extrapacks?

You do not need the "debug" repos, unless you have an specific reason.


You are missing:

repo-openh264
Open H.264 Codec (openSUSE Leap)
http://codecs.opensuse.org/openh264/openSUSE_Leap/

You are also missing the source repos, but they are normally disabled.
And you don't have packman, but that's your choice.


The gnome apps repo I'm not familiar with it, but I guess that I would
assign it a higher priority (lower number).


Run this:

rpm -q -a --queryformat "%{INSTALLTIME}\t%{INSTALLTIME:day} \
%{BUILDTIME:day} %-30{NAME}\t%15{VERSION}-%-7{RELEASE}\t%{arch} \
%25{VENDOR}%25{PACKAGER} == %{DISTRIBUTION} %{DISTTAG}\n" \
| sort | cut --fields="2-" | tee rpmlist \
| egrep -v "openSUSE Leap 15\.5|openSUSE_Leap_15.5|"\
"\-lp153|SUSE Linux Enterprise 15|openSUSE\ Leap\ 15.5" | less -S


Each package that get listed there, you find out why you have it, and
decide if it is correct or not. If it says 15.4, 15.3, 15.2... update it
or get rid of it.




--
Cheers, Carlos.

Carlos E.R.

unread,
Jul 25, 2023, 6:16:31 PM7/25/23
to
On 2023-07-25 19:55, bad sector wrote:
> On 7/25/23 13:36, Carlos E.R. wrote:
>> On 2023-07-25 18:55, bad sector wrote:
>>> On 7/25/23 12:17, bad sector wrote:
>>
>>
>>> # zypper up
>>> Loading repository data...
>>> Reading installed packages...
>>>
>>> The following 17 items are locked and will not be changed by any action:
>>>   Available:
>>>    kwalletd5-lang kwallet-devel kwallet-devel-32bit kwalletmanager5
>>> kwalletmanager5-lang kwallet-tools kwallet-tools-lang
>>>    libkwalletbackend5-5-32bit libsvn_auth_kwallet-1-0
>>> nvidia-computeG05-32bit nvidia-glG05-32bit pam_kwallet pam_kwallet-32bit
>>>    pam_kwallet-common remmina-plugin-kwallet signon-kwallet-extension
>>> x11-video-nvidiaG05-32bit
>>
>> Why do you have nvidia packages locked?
>
> Mostly I just disable the nvidia repo on account that far too often
> their crappy repo is either slower than a dead fucking dog or it just
> plain grinds to a halt and if I happen to be using zypper at the time
> that's very likely to crash the whole parade! Remind me never to buy
> anything that smells of nvidia again.

I agree with not buying nvidia again, but the repository should not
impede your working. And not having updated something there that should,
can harm your system.

>> Undo that.
>
> OK it was 3 32 bit packages, I returned status to do not install so if
> anything needs them as a depend it'll get them

Ok, good.

--
Cheers, Carlos.

bad sector

unread,
Jul 25, 2023, 7:24:36 PM7/25/23
to
On 7/25/23 18:13, Carlos E.R. wrote:
> On 2023-07-25 19:55, bad sector wrote:
>> On 7/25/23 13:34, Carlos E.R. wrote:
>>> "zypper lr --details"
>>
>> 1 week
>> https://paste.opensuse.org/pastes/770d402e0fa0
>>
>>
>
> The "name" column is very strange, I've never seen one like that.
>
>
>
> What's in  leap-extrapacks?

chickenshit, hardly ever used anymore but there was a time when many
packages that I cannot imagine life without were not is the Suse repos.


> You do not need the "debug" repos, unless you have an specific reason.
> You are missing:
> repo-openh264
>    Open H.264 Codec (openSUSE Leap)
>    http://codecs.opensuse.org/openh264/openSUSE_Leap/

done... I thought codecs were all covered by the packman packages


> You are also missing the source repos, but they are normally disabled.
> And you don't have packman, but that's your choice.

I usually do, but the list you saw was from an instance when I had just
added community repos but packman wasn't in the offerings yet for some
reason. It was after I edited the repos manually to 15.5 that I got in
in. When the box thought itself to be 15.4 then trying to add community
repos did not include packman or nvidia for some reason.

> The gnome apps repo I'm not familiar with it, but I guess that I would
> assign it a higher priority (lower number).

gftp for one, there was a time when google-earth had to be there too.



> Run this:
>
> rpm -q -a --queryformat "%{INSTALLTIME}\t%{INSTALLTIME:day} \
>    %{BUILDTIME:day} %-30{NAME}\t%15{VERSION}-%-7{RELEASE}\t%{arch} \
>    %25{VENDOR}%25{PACKAGER} == %{DISTRIBUTION} %{DISTTAG}\n"   \
>   | sort | cut --fields="2-" | tee rpmlist   \
>   | egrep -v "openSUSE Leap 15\.5|openSUSE_Leap_15.5|"\
>     "\-lp153|SUSE Linux Enterprise 15|openSUSE\ Leap\ 15.5" | less -S
>
>
> Each package that get listed there, you find out why you have it, and
> decide if it is correct or not. If it says 15.4, 15.3, 15.2... update it
> or get rid of it.

ends up going in like this

# rpm -q -a --queryformat "%{INSTALLTIME}\t%{INSTALLTIME:day} \
> %{BUILDTIME:day} %-30{NAME}\t%15{VERSION}-%-7{RELEASE}\t%{arch} \
> %25{VENDOR}%25{PACKAGER} == %{DISTRIBUTION} %{DISTTAG}\n" \
> | sort | cut --fields="2-" | tee rpmlist \
> | egrep -v "openSUSE Leap 15\.5|openSUSE_Leap_15.5|"\
> "\-lp153|SUSE Linux Enterprise 15|openSUSE\ Leap\ 15.5" | less -S


and the response is

~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
byte 0/0 (END)






Carlos E.R.

unread,
Jul 26, 2023, 6:33:04 AM7/26/23
to
On 2023-07-26 01:24, bad sector wrote:
> On 7/25/23 18:13, Carlos E.R. wrote:
>> On 2023-07-25 19:55, bad sector wrote:
>>> On 7/25/23 13:34, Carlos E.R. wrote:
>>>> "zypper lr --details"
>>>
>>> 1 week
>>> https://paste.opensuse.org/pastes/770d402e0fa0
>>>
>>>
>>
>> The "name" column is very strange, I've never seen one like that.
>>
>>
>>
>> What's in  leap-extrapacks?
>
> chickenshit, hardly ever used anymore but there was a time when many
> packages that I cannot imagine life without were not is the Suse repos.
>
>
>> You do not need the "debug" repos, unless you have an specific reason.
>> You are missing:
>> repo-openh264
>>     Open H.264 Codec (openSUSE Leap)
>>     http://codecs.opensuse.org/openh264/openSUSE_Leap/
>
> done... I thought codecs were all covered by the packman packages

This one is new. I don't know exactly what for.

And you don't have packman, anyway.
Either there was an error in the quotes or backslashes, or there is no
wrong package at all, which I have never seen.

Try again:


rpm -q -a --queryformat "%{INSTALLTIME}\t%{INSTALLTIME:day} \
%{BUILDTIME:day} %-30{NAME}\t%15{VERSION}-%-7{RELEASE}\t%{arch} \
%25{VENDOR}%25{PACKAGER} == %{DISTRIBUTION} %{DISTTAG}\n" \
| sort | cut --fields="2-" | tee rpmlist \
| egrep -v "openSUSE Leap 15\.5|openSUSE_Leap_15.5|\-lp153|SUSE Linux
Enterprise 15|openSUSE\ Leap\ 15.5" | less -S


The last two lines are a single line that wrapped.


--
Cheers, Carlos.

0 new messages