DRI and ATI Rage Mobility P
Boris Kurktchiev
mind that I have never used anything but nvidia and their drivers which are
really easy to setup and install. So on a slackware-current here is what my
XF86Config looks like:
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "drm"
Load "glx"
Load "xtrap"
Load "type1"
Load "speedo"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Rage Mobility P/M AGP 2x"
ChipSet "ati"
ChipId 0x4c4d
ChipRev 0x64
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1400x1050" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubSection
EndSection
now when I start fluxbox and do glxinfo i get this:
name of display: :0.0
Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0 screen: 0
direct rendering: No
and a bunch more autoput but that part is irrelevant. So now when I run
glxgears i get something like 50 FPS well that is not sufficient to run
anything (chrome, tux racer, diablo). So I went to google and tossed it and
turned it and gooogle did not come up with anything past what I have in my
config file (load dri, load glx, and setting the dri perms). One thing i
noticed is that everyone talks about /dev/dri/card0 and I don't have that.
So i though maybe something is screwed or I am not doing it right so i
compile dthe kernel with devfs support and see if it will create it. No
luck. Also I compiled support for DRM in the kernel(nopt sure if it affects
anything). So now I am really out of ideas .... anyone know of anything
that will get this mofo working?
Billy Watt
Boris Kurktchiev <tech...@gmx.net> rambled:
<Snip info>
What is the output of lsmod ?
Docs indicate that it should show r128 and r128_dri in the list somewhere.
--
Billy
"Pinky, are you pondering what I'm pondering?"
I think so, Brain, but if we have nothing to fear but fear itself, why
does Elanore Roosevelt wear that spooky mask?
Boris Kurktchiev
> In news:bpu5g7$1spg62$1...@ID-163914.news.uni-berlin.de,
> Boris Kurktchiev <tech...@gmx.net> rambled:
>
> <Snip info>
>
> What is the output of lsmod ?
>
> Docs indicate that it should show r128 and r128_dri in the list somewhere.
>
Umm where did you see that? I dug thourhg tboth kernel and X docs and didn't
see anything saying that but at any case here is the output of lsmod:
Module Size Used by Tainted: P
cisco_ipsec 379264 0 (unused)
uhci 25916 0 (unused)
usbcore 63308 1 [uhci]
orinoco_cs 4628 1
orinoco 35604 0 [orinoco_cs]
hermes 5988 0 [orinoco_cs orinoco]
ds 7028 2 [orinoco_cs]
yenta_socket 10848 2
pcmcia_core 43840 0 [orinoco_cs ds yenta_socket]
agpgart 42040 0 (unused)
also here is the output of lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc100000-fdffffff
00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 009e
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 009e
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 1090 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 1060 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev
10)
Subsystem: Dell Computer Corporation: Unknown device 009e
Flags: medium devsel, IRQ 5
I/O ports at 1400 [size=256]
Capabilities: [c0] Power Management version 2
00:10.0 Communication controller: Lucent Microelectronics WinModem 56k (rev
01)
Subsystem: Actiontec Electronics Inc: Unknown device 2100
Flags: medium devsel, IRQ 5
Memory at fc000000 (32-bit, non-prefetchable) [size=256]
I/O ports at 1080 [size=8]
I/O ports at 1800 [size=256]
Capabilities: [f8] Power Management version 2
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M
AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 009e
Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 2000 [size=256]
Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Capabilities: [5c] Power Management version 1
Billy Watt
Boris Kurktchiev <tech...@gmx.net> rambled:
> Billy Watt has annoyed the Slackware gods with:
>
>> In news:bpu5g7$1spg62$1...@ID-163914.news.uni-berlin.de,
>> Boris Kurktchiev <tech...@gmx.net> rambled:
>>
>> <Snip info>
>>
>> What is the output of lsmod ?
>>
>> Docs indicate that it should show r128 and r128_dri in the list
>> somewhere.
>>
> Umm where did you see that?
<snip again, info helpful as well though>
I saw it in the DRI users guide at
http://dri.sourceforge.net/doc/DRIuserguide.html
Glad to see AGPGART there, I forgot about that one.
--
Billy
"Are you pondering what I'm pondering?"
I think so, Larry, and um, Brain, but how can we get seven dwarves to
shave their legs?
Boris Kurktchiev
> In news:bpuar4$1ssefr$1...@ID-163914.news.uni-berlin.de,
> Boris Kurktchiev <tech...@gmx.net> rambled:
>> Billy Watt has annoyed the Slackware gods with:
>>
>>> In news:bpu5g7$1spg62$1...@ID-163914.news.uni-berlin.de,
>>> Boris Kurktchiev <tech...@gmx.net> rambled:
>>>
>>> <Snip info>
>>>
>>> What is the output of lsmod ?
>>>
>>> Docs indicate that it should show r128 and r128_dri in the list
>>> somewhere.
> I saw it in the DRI users guide at
> http://dri.sourceforge.net/doc/DRIuserguide.html
>
well i found r128_dri.a in /usr/X11/lib/modules/dri but you can't really
insert those in the kernel... Oh Yeah one more thing i forgot to add a
sniplet from the X log :) :
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
(II) Loading extension XFree86-DRI
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
Bradley Reed
Hash: SHA1
On Mon, 24 Nov 2003 16:44:51 -0500, Boris wrote:
> Ok I got one of these babies and I am trying to enable dri. Please keep in
> mind that I have never used anything but nvidia and their drivers which are
> really easy to setup and install. So on a slackware-current here is what my
> XF86Config looks like:
>
> now when I start fluxbox and do glxinfo i get this:
> name of display: :0.0
> Xlib: extension "XFree86-DRI" missing on display ":0.0".
> display: :0 screen: 0
> direct rendering: No
>
This is an older card right? lspci shows something like this?
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M AGP 2x (rev64)
If so, it is a mach64 chip. My lsmod shows both agpgart and mach64.
I don't remember exactly what my fps was in glxgears with the stock
Slackware mach64 module but I think it was about 500fps. I boosted it to
1400+ with the unified DRI and XVideo modules from
http://www.retinalburn.net/linux/dri_xv.html
Snippet from XF86Config:
# Device configured by xf86config:
Section "Device"
Identifier "ATI Rage Mobility P/M"
Driver "ati"
VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
Brad
-----BEGIN PGP SIGNATURE-----
iD8DBQE/ws2pkDp4KjYna1ARAtUiAJsHoRqTLLznYvwYycqVD7xAy1nVfwCdE4SD
tkRp9xDlBwXQ1Wa3IQaEEV8=
=lbKb
-----END PGP SIGNATURE-----
Boris Kurktchiev
Hash: SHA1
Bradley Reed has annoyed the Slackware gods with:
> This is an older card right? lspci shows something like this?
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
> P/M AGP 2x (rev64)
>
> If so, it is a mach64 chip. My lsmod shows both agpgart and mach64.
>
> I don't remember exactly what my fps was in glxgears with the stock
> Slackware mach64 module but I think it was about 500fps. I boosted it to
> 1400+ with the unified DRI and XVideo modules from
>
> http://www.retinalburn.net/linux/dri_xv.html
>
> Snippet from XF86Config:
>
> # Device configured by xf86config:
>
> Section "Device"
> Identifier "ATI Rage Mobility P/M"
> Driver "ati"
> VideoRam 16384
> # Insert Clocks lines here if appropriate
> EndSection
>
> Brad
>
Do you have the same card? If so can I see your whole XF86Config file? I
installed the suggested drivers and I still get the same output from
glxinfo: no direct rendering. Thanks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/xBkOAlkzNOAxxOgRAo4vAJ9KEJfrI2cV7nowb3fyfr/AhvHVUQCgoDtR
8aobH7HS2W2rLHAyPlNB7fA=
=FoWA
-----END PGP SIGNATURE-----
Bradley Reed
Hash: SHA1
On Tue, 25 Nov 2003 22:07:56 -0500, Boris wrote:
>
> Bradley Reed has annoyed the Slackware gods with:
>> This is an older card right? lspci shows something like this?
>>
>> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
>> P/M AGP 2x (rev64)
>>
> Do you have the same card? If so can I see your whole XF86Config file? I
> installed the suggested drivers and I still get the same output from
> glxinfo: no direct rendering. Thanks
>
>
Yep, that entry was cut and pasted from my laptop here. I'd be happy to
let you see my whole XF86Config, the main reason I didn't post it before
is because it is full of all kinds of irrelevant stuff, such as
Synaptics Touch Pad module configuration.
After compiling the new mach64 module, did you run depmod? or depmod -A
perhaps that is needed.
in /etc/rc.d/rc.modules is the line /sbin/modprobe agpgart uncommented?
here is my XF86Config, but I don't think the problem is in it. To keep
this posting somewhat shorter, I'll snip some commented lines out.
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
# This loads the Synaptics TouchPad module
Load "synaptics"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse1"
Option "Device" "/dev/psaux"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
Option "MaxTapTime" "20"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
# Option "Repeater" "/dev/ps2mouse"
# Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "LCD Laptop 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 50-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Rage Mobility P/M"
Driver "ati"
VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen 1"
Device "ATI Rage Mobility P/M"
Monitor "LCD Laptop 1024x768"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
-----BEGIN PGP SIGNATURE-----
iD8DBQE/xEEVkDp4KjYna1ARAmjGAJ9uRDrHz3yf1V23RQkgCGCUY3PJVwCgnm4H
KwEIGzHy1xbf/bl7/r6peJw=
=7z1I
-----END PGP SIGNATURE-----
Boris Kurktchiev
Hash: SHA1
Bradley Reed has annoyed the Slackware gods with:
>Try was cut and pasted from my laptop here. I'd be happy to
> let you see my whole XF86Config, the main reason I didn't post it before
> is because it is full of all kinds of irrelevant stuff, such as
> Synaptics Touch Pad module configuration.
>
> After compiling the new mach64 module, did you run depmod? or depmod -A
> perhaps that is needed.
>
> in /etc/rc.d/rc.modules is the line /sbin/modprobe agpgart uncommented?
>
Yes I ran depmon -ae and even rebooted. Also you config file does not look
too different than mine... can you show me the output from glxinfo please?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/xKtiAlkzNOAxxOgRApx6AJ9DSyZMh3MqIuhtnRPD1XiTONM/LQCfTk7u
6aMhMNVxwQ5W1ZeeiFeguak=
=Vi65
-----END PGP SIGNATURE-----
Bradley Reed
Hash: SHA1
On Wed, 26 Nov 2003 08:32:15 -0500, Boris wrote:
>
> Yes I ran depmon -ae and even rebooted. Also you config file does not look
> too different than mine... can you show me the output from glxinfo please?
Here is glxinfo, glxgears, and xvinfo.
breed@ssurfer:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_EXT_import_context, GLX_EXT_visual_info,
GLX_EXT_visual_rating
OpenGL vendor string: Gareth Hughes, Leif Delgass, José Fonseca
OpenGL renderer string: Mesa DRI Mach64 20030211 [Rage Pro] AGP 2x x86/MMX/SSE
OpenGL version string: 1.2 Mesa 5.0.1
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_transpose_matrix,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_convolution, GL_EXT_compiled_vertex_array, GL_EXT_histogram,
GL_EXT_packed_pixels, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_texture3D, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_IBM_rasterpos_clip, GL_MESA_window_pos, GL_NV_texgen_reflection,
GL_SGI_color_matrix, GL_SGI_color_table
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
- ----------------------------------------------------------------------
0x23 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x25 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x26 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x27 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x29 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2a 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2b 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2c 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x2d 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2e 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2f 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x30 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x31 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x32 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
breed@ssurfer:~$ glxgears
1335 frames in 5.0 seconds = 267.000 FPS
1409 frames in 5.0 seconds = 281.800 FPS
1413 frames in 5.0 seconds = 282.600 FPS
1410 frames in 5.0 seconds = 282.000 FPS
1414 frames in 5.0 seconds = 282.800 FPS
1415 frames in 5.0 seconds = 283.000 FPS
1400 frames in 5.0 seconds = 280.000 FPS
Broken pipe
breed@ssurfer:~$ xvinfo
X-Video Extension version 2.2
screen #0
Adaptor #0: "ATI mach64 Video Overlay"
number of ports: 1
port base: 69
operations supported: PutImage
supported visuals:
depth 16, visualID 0x23
depth 16, visualID 0x24
depth 16, visualID 0x25
depth 16, visualID 0x26
depth 16, visualID 0x27
depth 16, visualID 0x28
depth 16, visualID 0x29
depth 16, visualID 0x2a
depth 16, visualID 0x2b
depth 16, visualID 0x2c
depth 16, visualID 0x2d
depth 16, visualID 0x2e
depth 16, visualID 0x2f
depth 16, visualID 0x30
depth 16, visualID 0x31
depth 16, visualID 0x32
number of attributes: 17
"XV_DEVICE_ID" (range 0 to -1)
client gettable attribute (current value is 89)
"XV_LOCATION_ID" (range 0 to -1)
client gettable attribute (current value is 90)
"XV_INSTANCE_ID" (range 0 to -1)
client gettable attribute (current value is 91)
"XV_SET_DEFAULTS" (range 0 to 1)
client settable attribute
"XV_AUTOPAINT_COLORKEY" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_COLORKEY" (range 0 to -1)
client settable attribute
client gettable attribute (current value is 6208)
"XV_DOUBLE_BUFFER" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_ENCODING" (range 0 to 12)
client settable attribute
client gettable attribute (current value is 1)
"XV_FREQ" (range 0 to -1)
client settable attribute
client gettable attribute (current value is 1000)
"XV_TUNER_STATUS" (range -1000 to 1000)
client gettable attribute (current value is 4)
"XV_MUTE" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_VOLUME" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is -1000)
"XV_BRIGHTNESS" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_CONTRAST" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_SATURATION" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 16)
"XV_COLOR" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 16)
"XV_HUE" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
maximum XvImage size: 2048 x 2048
Number of image formats: 4
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
-----BEGIN PGP SIGNATURE-----
iD8DBQE/xLKdkDp4KjYna1ARAox4AJ9SgcU4tPbfVKpbcUdQXHwXj9LQEgCeKHuw
EWLey5hyAAyNyXXYH5d9TKc=
=qN46
-----END PGP SIGNATURE-----
Bradley Reed
Hash: SHA1
On Wed, 26 Nov 2003 08:03:10 -0600, Bradley wrote:
>
> On Wed, 26 Nov 2003 08:32:15 -0500, Boris wrote:
>>
>> Yes I ran depmon -ae and even rebooted. Also you config file does not look
>> too different than mine... can you show me the output from glxinfo please?
Oh, when you restart X, do you get any messages in dmesg?
I get:
[drm] descriptor ring: cpu addr 0xc9ca0000, bus addr: 0x09ca0000
[drm] DMA test succeeded, using asynchronous DMA mode
PCI: Found IRQ 5 for device 01:00.0
PCI: Sharing IRQ 5 with 00:11.0
[drm] descriptor ring: cpu addr 0xc7808000, bus addr: 0x07808000
[drm] DMA test succeeded, using asynchronous DMA mode
PCI: Found IRQ 5 for device 01:00.0
PCI: Sharing IRQ 5 with 00:11.0
HTH,
Brad
-----BEGIN PGP SIGNATURE-----
iD8DBQE/xMNOkDp4KjYna1ARApF8AJwMBd7dnJC/rqUUgm1yr3aRee4XYgCfd8/i
vmEsntgsfSI+uP7qpD1Dpm8=
=ZsJk
-----END PGP SIGNATURE-----
Boris Kurktchiev
Hash: SHA1
Bradley Reed has annoyed the Slackware gods with:
> I get:
>
> [drm] descriptor ring: cpu addr 0xc9ca0000, bus addr: 0x09ca0000
> [drm] DMA test succeeded, using asynchronous DMA mode
> PCI: Found IRQ 5 for device 01:00.0
> PCI: Sharing IRQ 5 with 00:11.0
> [drm] descriptor ring: cpu addr 0xc7808000, bus addr: 0x07808000
> [drm] DMA test succeeded, using asynchronous DMA mode
> PCI: Found IRQ 5 for device 01:00.0
> PCI: Sharing IRQ 5 with 00:11.0
>
> HTH,
> Brad
I don't get anything so I am thkning that might be the problem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/w919AlkzNOAxxOgRAr7XAJwMInBsBvTrhYIn29EXSrAbwKo3owCgrJ7x
juze1eMLVHG4vns00ZWGras=
=TL7a
-----END PGP SIGNATURE-----
Bradley Reed
Hash: SHA1
On Tue, 25 Nov 2003 17:53:46 -0500, Boris wrote:
>
> Bradley Reed has annoyed the Slackware gods with:
>> I get:
>>
>> [drm] descriptor ring: cpu addr 0xc9ca0000, bus addr: 0x09ca0000
>> [drm] DMA test succeeded, using asynchronous DMA mode
>> PCI: Found IRQ 5 for device 01:00.0
>> PCI: Sharing IRQ 5 with 00:11.0
>> [drm] descriptor ring: cpu addr 0xc7808000, bus addr: 0x07808000
>> [drm] DMA test succeeded, using asynchronous DMA mode
>> PCI: Found IRQ 5 for device 01:00.0
>> PCI: Sharing IRQ 5 with 00:11.0
>>
>> HTH,
>> Brad
>
> I don't get anything so I am thkning that might be the problem.
Did you ever get it working?
When you installed the mach64 DRI module, did you compile it from the
source, or download the binary? If you used the binary modules, you may
wish to try the source and vice-versa.
Brad
-----BEGIN PGP SIGNATURE-----
iD8DBQE/yYjKkDp4KjYna1ARAnz4AJ9W38dWTtgL8oD2U8c6Z//r+ttwwwCfaMoB
LelX4aYZ42XnvRL+TpuvqQA=
=Qvri
-----END PGP SIGNATURE-----