Tascam Porta 07-track bouncing

[Bonz]

I recently aquired a Tascam Porta 07 4-track which came without a manual. I
can't seem to figure out how to bounce tracks. I'm probably overlooking the
obvious, so a push in the right direction would be appreciated.

Bonz.

[Brian Shrader]

I don't know specifically for the Porta 07, but most 4tracks I've seen work
like this:

For each track there is a record selector switch that lets you select either
"Record" or one of "Left" or "Right"

Choose the L or R and pan the tracks you want to bounce in that direction,
you can do this either with a prerecorded track, or you can bounce multiple
tracks while recording (sending multiple channels to one track).

Good luck!

Bonz wrote in message <91248156...@executor.comnet.ca>...

[gary stallwood]

Hello Bonz, hope this will help. To bounce ie:- recorded trks 123
onto 4 on your porta 07 follow these steps. Set meter switch on Trk,
monitor switch on Cue and Buss R on 4. Set trk 123 input switch on Tape
and pan Trks 123 all the way to the right, leave trk 4 pan in center,
set input switch for trk 4 on mic/line, turn all tape cue vol's down,
turn master vol to shaded area and trks 123 vol up to desired mix levels
(+ any eq and effects through the effects return/send) monitor through
headphones. Hit play/record and there it is ,1bouncd trk! Hope this
helps,good luck , cheers , Gareth.

[GOYANKEEES]

If you have recorded on the first three tracks set their input switchs to
TAPE.

Turn PAN controls of the first 3 channels to the right.

Set BUSS to track 4

Turn TAPE CUE for channels 1-3 down put MONITER SELECT to cue. You should hear
all of the tracks on channel 4 when you turn up the TRACK 4 CUE.

Mix channels using faders