Manufacturing Job Openings
Kevin Salisbury
acceptable to post job openings here - if not, please accept my
apologies. Thank you for your time. -Kevin Salisbury
Looking for a change and a challenge? Due to tremendous sales growth in
aviation MRO markets, Twin Manufacturing, a leading Turbine Engine
Component Repair Station, has several immediate and permanent,
openings.
- Process Development Engineer: Primary job duties will be analysis of
inspection reports to produce work orders and process routing sheets
for component repair. Also responsible for process planning, process
creation, operation sheet preparation, and cost estimation. KeyCreator,
CADKey, SolidWorks, SurfCAM and MasterCAM experience is a plus. Also
experience with OEM Engine Maintenance Manuals and repair development a
plus (Especially for IAE, GE and CFM components). Possible growth to
Senior Engineer position. (Current Senior Process Engineers looking for
a change are also encouraged to apply).
- CNC Milling Programmer/Operator:. Primary job duties will be to
program and operate a CNC Milling Machining Center (FANUC and OKUMA
controllers). Four and Five Axis experience is a plus.
- CNC Grinder Programmer/Operator: Primary job duties will be to
program and operate CNC Grinder using FANUC controls. Macro programming
experience is a plus.
- Manual VTL Operator: Primary job duties will be to perform machining
operations on a wide variety of gas turbine engine components.
- Tig Welder: Primary job duties will be to perform aircraft welding
operations and minor blending to a wide variety of gas turbine engine
components.
- Burr Bench/Assembly: Primary job duties will be to perform assembly,
deburring, blending, painting, and other operations to a wide variety
of gas turbine engine components. We are willing to train the right
candidate.
- QC Inspector: Primary job duties will be to produce both tear down
and final inspection reports for a wide variety of gas turbine engine
components. Possible growth to QC CMM Operator so experience with CMM
programming is a plus, but is not required. We are willing to train the
right candidate.
At Twin, the average employee has been employed here for over seven
years. Twin is a fast paced, "team" environment in a climate
controlled, modern manufacturing facility. Pay and benefits are
competitive and are based on candidate experience. All positions
require technical experience and to own your own tools as applicable.
We are FAA, EASA/JAA, and CAAC licensed and approved with ISO9001:2000,
AS9100 and Nadcap accreditations. Some safety sensitive positions may
require random drug and alcohol testing per FAA Regulations. We are an
Equal Opportunity Employer.
Please forward your resume for immediate consideration or apply
in-person.
Telephone: 1 860.289.6041
Fax: 1 860.289.0561
Email: h...@twinman.com
Mailing Address:
Twin Manufacturing Co. Inc.
273 Chapel Road
South Windsor, CT 06074 USA