Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Framon #2 For Sale, $1000 OBO, Just the machine and cutter, no codebooks or sofrtare, no spacers.
482 views
Skip to first unread message
merlini...@gmail.com
Jul 5, 2013, 3:30:09 PM7/5/13
to
Howdy All,
Used to be on here many years ago but got out of locksmithing.
Before I closed up shop, I sent my extra Framon #2 machine back to Framon for minor repairs (leadscrew was damaged, they replaced it and did an overall work-over of the machine). Works perfectly but will likely need a new cutter in the future if you do high volume work. Framon said they would replace the cutter at a fee but that it was still within specs at the time they looked at it; I am cheap and didn't pay to replace it. This worked out well because I put the machine directly into storage when I got it back from Framon and never used it again. Machine is in perfect working order but what you are buying is just the machine with the cutter installed. No spacer blocks, no code books or code software and no manual are included. Just the machine. $1000 OBO plus $25 for shipping. Located in New Orleans and will ship via US Postal Service fully insured with tracking. Thanks for your time. If you have any further questions please ask. -MerlinInAlaska (no longer in Alaska but I kept the email...)
Used to be on here many years ago but got out of locksmithing.
Before I closed up shop, I sent my extra Framon #2 machine back to Framon for minor repairs (leadscrew was damaged, they replaced it and did an overall work-over of the machine). Works perfectly but will likely need a new cutter in the future if you do high volume work. Framon said they would replace the cutter at a fee but that it was still within specs at the time they looked at it; I am cheap and didn't pay to replace it. This worked out well because I put the machine directly into storage when I got it back from Framon and never used it again. Machine is in perfect working order but what you are buying is just the machine with the cutter installed. No spacer blocks, no code books or code software and no manual are included. Just the machine. $1000 OBO plus $25 for shipping. Located in New Orleans and will ship via US Postal Service fully insured with tracking. Thanks for your time. If you have any further questions please ask. -MerlinInAlaska (no longer in Alaska but I kept the email...)
Stormin Mormon
Jul 5, 2013, 7:25:25 PM7/5/13
to
Best wishes, hope you find a buyer. Should I forward your message to some folks I know?
.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
.
<merlini...@gmail.com> wrote in message news:4148a235-736f-483d...@googlegroups.com...
.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
.
<merlini...@gmail.com> wrote in message news:4148a235-736f-483d...@googlegroups.com...
merlini...@gmail.com
Jul 5, 2013, 7:43:39 PM7/5/13
to
Stormin Mormon,
If you would forward it I would greatly appreciate it.
Tried ebay but they consider it lockpicking equipment and my ALOA membership hasn't been renewed in ages so other secure forums are not accessible to me any longer. And thank you for doing this.
-Merlin
If you would forward it I would greatly appreciate it.
Tried ebay but they consider it lockpicking equipment and my ALOA membership hasn't been renewed in ages so other secure forums are not accessible to me any longer. And thank you for doing this.
-Merlin
Stormin Mormon
Jul 6, 2013, 7:54:30 AM7/6/13
to
Will do. I can't promise a lot of results. Only a dozen or so guys on the list with me.
<merlini...@gmail.com> wrote in message news:8a5d7bb9-5c76-46b5...@googlegroups.com...
<merlini...@gmail.com> wrote in message news:8a5d7bb9-5c76-46b5...@googlegroups.com...
merlini...@gmail.com
Jul 6, 2013, 10:01:52 AM7/6/13
to
Anything helps my friend. So thank you again. :)
merlini...@gmail.com
Jul 27, 2013, 11:33:48 AM7/27/13
to
Still available for those that may be interested.
:)
:)
Stormin Mormon
Jul 28, 2013, 8:17:49 AM7/28/13
to
Due to the Obama economic depression, high unemployment, and general
state of the nation, it may be available for a while longer.
Anyone old enough to remember the Reagan years? I had lots of work,
hired help, bought equipment, and life was good.
state of the nation, it may be available for a while longer.
Anyone old enough to remember the Reagan years? I had lots of work,
hired help, bought equipment, and life was good.
Ignoramus11209
Aug 12, 2013, 6:17:33 PM8/12/13
to
On 2013-07-28, Stormin Mormon <cayo...@hotmail.com> wrote:
> Due to the Obama economic depression, high unemployment, and general
> state of the nation, it may be available for a while longer.
>
> Anyone old enough to remember the Reagan years? I had lots of work,
> hired help, bought equipment, and life was good.
I have more work than I can handle, hired help, etc
> Due to the Obama economic depression, high unemployment, and general
> state of the nation, it may be available for a while longer.
>
> Anyone old enough to remember the Reagan years? I had lots of work,
> hired help, bought equipment, and life was good.
irfan...@gmail.com
Aug 18, 2015, 12:10:55 AM8/18/15
to
servings...@gmail.com
Apr 5, 2017, 9:57:12 PM4/5/17
to
Do you by chance still have the Framon2?
courte...@gmail.com
Jun 1, 2018, 7:10:48 PM6/1/18
to
courte...@gmail.com
Jun 1, 2018, 7:11:41 PM6/1/18
to
Hello,
I know this post is almost 5 years old but are you still selling your Framon 2?
I know this post is almost 5 years old but are you still selling your Framon 2?
0 new messages