After much web searching I have obtained a replacement oven bottom element
assembly for our Bosch (HBN6450GB/02).
This comes with no instructions of course, so to be doubly sure I had the
connections right, I checked the voltages of the leads before doing the
final hooking it up.
There are two rings of the element assembly, marked with different voltages:
250V for the outer, and 75V for the inner. But when I check the leads
themselves (very carefully!) I only find 250V available.
Anyone have more info to explain this before I hook it all back up finally?
Ideally, can anyone point me at a circuit diagram.
(Typical how one can find any number of service manuals with complex circuit
diags for cars: but, apparently, b' all for a basic thing like the kitchen
cooker!)
Many thanks,
S