Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Craftsman (Ryobi) router disassembly
19 views
Skip to first unread message
D & G
Sep 17, 2009, 2:18:15 AM9/17/09
to
I have a Craftsman plunge router model 315.248700, I understand it's a Ryobi
RE600. How do I get it apart to replace bearings? I took out the 4 screws on
the metal casting end ( the working end of the router) but it only moves a
little bit. Removing the plastic end cover at the other end of the router
doesn't reveal any other fasteners. I took off the handles and put a 2 jaw
bearing puller on the output shaft to try to pull the casting up off the
shaft but I'm afraid of breaking the casting.
RE600. How do I get it apart to replace bearings? I took out the 4 screws on
the metal casting end ( the working end of the router) but it only moves a
little bit. Removing the plastic end cover at the other end of the router
doesn't reveal any other fasteners. I took off the handles and put a 2 jaw
bearing puller on the output shaft to try to pull the casting up off the
shaft but I'm afraid of breaking the casting.
Any help appreciated.
Don
0 new messages