On Wed, 27 Aug 2014 08:30:32 -0700 (PDT), trader_4
<
tra...@optonline.net> wrote:
>> Might take four or five complete turns (counter
>>
>> clockwise) to release the air.
>>
>>
>>
>> --
>
>There isn't much to them. Just a hose/pipe connected to a tank with a valve and pressure gauge. One thing, is he sure he's really filling it? If you had
>a gauge before a closed valve, it would read whatever pressure it's connected
>up to, but no air would go in the tank. If it's really filling, he should see the pressure slowly climb. And if air goes in, it can't be clogged.
>
>Also don't know what me means by tried it with the hose, but no nozzle.
>The typical air disconnects, if there is no attachement, the hose connector
>stays shut, no air will come out.
I'll try to be more speific. The tank has a gauge on it which read
80PSI before I successfullly added air to a 120PSI. I accomplished
that through a air fitting in the valve assembly on the top of the
tank which allowed the air to be added after I rotated a small knob a
bit. When I then closed that knob i could not add any more air. That
was simple.
Now then, I have a 20' air hose to take air from the tank. I added a
'blow gun' to the hose similar to that at:
http://www.northerntool.com/shop/tools/product_42497_42497
to a coupler similar to :
http://www.airhoseshop.com/site/932654/product/IP4F-S
I get no air out of the gun, nor out of the coupler when I remove the
gun. The latter I expected.
The valve assembly on the top of the tank has a second knob under the
gauge on the outlet hose side of the assembly, which I expect controls
air going out. I have rotated that knob counter clockwise, first a
little bit, then a lot, to see if air would then come out. It does
not.
Is the hose clogged? I thknk not. I have a second large compressor,
and tried the hose on it. Works fine.
Obviously I have missed something trivial here.
John