"Grommet" for granite counter top hole
Mike C
electrical plug for a tv permanently left on the island. I know how
to do that, but I want one of those stainless steel (preferably
brushed) rings to finish out the top nicely. It looks like a grommet
basically and you shove it in the hole and it sits almost flush with
the counter top and looks better than a plain hole. The problem is I
don't know what you would call that and searching hasn't turned up
anything.
dadiOH
Wire grommet
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
Mike C
> Mike C wrote:
> > I want to drill a hole in my granite island counter to fit a
> > electrical plug for a tv permanently left on the island. I know how
> > to do that, but I want one of those stainless steel (preferably
> > brushed) rings to finish out the top nicely. It looks like a grommet
> > basically and you shove it in the hole and it sits almost flush with
> > the counter top and looks better than a plain hole. The problem is I
> > don't know what you would call that and searching hasn't turned up
> > anything.
>
> Wire grommet
>
>
> --
>
> dadiOH
> ____________________________
>
> dadiOH's dandies v3.06...
> ...a help file of info about MP3s, recording from
> LP/cassette and tips & tricks on this and that.
> Get it athttp://mysite.verizon.net/xico
Thanks. That looks like what I need. Most are plastic, so I will need
to search around a bit.
One big thing I forgot to mention is I wanted to silicon it to the
counter so that when something is spilled, the liquid won't go into
the hole in the counter, so it isn't only cosmetic.
mike
> I want to drill a hole in my granite island counter to fit a
> electrical plug for a tv permanently left on the island.
I think you may one day come to regret drilling a hole in a granite
counter for a TV cord.
They make lightweight TVs that could could mount on just about any
wall or even hang from the ceiling if you must have a TV in the
kitchen.
Joe
>snip<
> I think you may one day come to regret drilling a hole in a granite
> counter for a TV cord.
>snip<
Probably not important. The OP is working on a 'island', another
current fashion that will be dated in a few years. Sooner or later,
SWMBO will get tired of walking around the obstruction and issue an
ultimatum to 'get rid of that ugly thing' and the newest fad will make
it moot. So go ahead and cut it up any way you want, OP.
Joe
hr(bob) hofmann@att.net
Do you mean you want to install an outlet to power the tv, or make a
hole to pass the power cord thru to an outlet below the counterr-top???
Metspitzer
You are kidding, right? Those islands are very nice.
cl...@snyder.on.ca
Pretty hard to make a countertop receptacle meet code.
hr(bob) hofmann@att.net
> On Thu, 27 May 2010 19:36:49 -0700 (PDT), "hr(bob) hofm...@att.net"
That's why I asked the question, the OP didn't specify any particular
size hole, AC plugs on the ends of power cords come in a number of
sizes.
Smitty Two
Metspitzer <kilo...@charter.net> wrote:
Yeah, I'm guessing this anti-island sentiment that's cropped up recently
is due to some people putting islands in kitchens that were too small
for them. An island is a terrific feature in a large kitchen.
Smitty Two
<cbae6724-a00d-4fa5...@c7g2000vbc.googlegroups.com>,
Mike C <micha...@hotmail.com> wrote:
Generically I call them trim rings. In plumbing they're called
escutcheons. You could add "brushed stainless" to one of those terms for
google.
willshak
I would look for a better place to put a permanent outlet, rather than a
granite top, like on the side of the island. Spills might get into the
top outlet, especially a catastrophic spill, like dropping a pot of
water or tomato sauce.
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @
keith
If you're foolish enough to put an island in an already too small
kitchen, in the working triangle, maybe. Other than that, they're a
great place to prepare food and with a granite top _the_ place to
prepare baked goods.
cl...@snyder.on.ca
"standard" gtommet size for countertops and desks is something like
2.25 to 2.5 inch.
Nonny
"willshak" <will...@00hvc.rr.com> wrote in message
news:z6WdnZoyCPyVV2LW...@supernews.com...
> Mike C wrote the following:
>> I want to drill a hole in my granite island counter to fit a
>> electrical plug for a tv permanently left on the island. I
>> know how
>> to do that, but I want one of those stainless steel (preferably
>> brushed) rings to finish out the top nicely. It looks like a
>> grommet
>> basically and you shove it in the hole and it sits almost flush
>> with
>> the counter top and looks better than a plain hole. The problem
>> is I
>> don't know what you would call that and searching hasn't turned
>> up
>> anything.
>>
>
> I would look for a better place to put a permanent outlet,
> rather than a granite top, like on the side of the island.
> Spills might get into the top outlet, especially a catastrophic
> spill, like dropping a pot of water or tomato sauce.
My guess is that the OP wants to run the power cord from the TV
through the hole, making the electrical connection below- such to
a power strip.
Nonny
>
> --
>
> Bill
> In Hamptonburgh, NY
> In the original Orange County. Est. 1683
> To email, remove the double zeroes after @
--
On most days,
it's just not worth
the effort of chewing
through the restraints..
Nonny
computer, cell phone charger, USB expander, telephone answering
machine, a Dustbuster wall wart etc. The trim rings for the holes
were bought at Office Depot or OfficeMax and are quite common. I
don't know if they are offered in metal: ours are black ABS-type
plastic.
FWIW, this is a good way to control cords, wall warts and plugs.
The counter top in question is for a drop-down secretary desk in
the kitchen. Below the top are two drawers. When we had the
granite tops installed in our kitchen, I put a duplex recepticle
BELOW the granite top, along with a Cat5 and telephone jack. Most
drawers are shorter than the depth of the counter top and if they
aren't they can be cut down. The goal is to have them about 5" or
so shorter than the depth of the cabinet.
Then, a 6-plug power strip behind each drawer gives you plenty of
plugs and space to install the "office" type of stuff, leaving a
much cleaner looking counter or desk top above, where it's
visible.
Nonny
--
On most days,
it�s just not worth
Mike C
> > electrical plug for a tv permanently left on the island. I know how
> > to do that, but I want one of those stainless steel (preferably
> > brushed) rings to finish out the top nicely. It looks like agrommet
> > basically and you shove it in the hole and it sits almost flush with
> > don't know what you would call that and searching hasn't turned up
> > anything.
>
> top outlet, especially a catastrophic spill, like dropping a pot of
> water or tomato sauce.
>
> --
>
> Bill
> In the original Orange County. Est. 1683
> To email, remove the double zeroes after @
The hole is for electrical/video cords for a computer monitor. It
will be used as a TV also, but as a computer with a wireless keyboard/
mouse. The island is 7x4 so plenty of room and doubt a 1.5" whole will
be a big regret. The outlet is already in the cabinet as there is a
microwave in the cabinet already.
There is a 11" overhang on 3 sides and drawers at the top of the 4th
side, so draping a cord is ugly and not practical.