Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Metal Cutting chainsaw blades
68 views
Skip to first unread message
smile...@what-where.how.dot.com.no
Jan 25, 2017, 7:06:04 AM1/25/17
to
I've heard they make chainsaw blades (chains) which are made to cut thru
metal, such as nails, electrical cables, light duty pipes, and so on.
They are made for demolition, and patricularly used by Fire Departments
for fast cutting holes in roofs, walls, and other stuff. Supposedly they
hold up well and stay sharp for most cutting. I doubt they would cut
thru a 2" steel pipe. but can cut copper pipes, wiring, and nails.
I have asked the workers at several building supply stores, and was told
that sort of thing does not exist. Well, I have seen firemen cutting
thru shingled roofs with a chainsaw, and besides all the shingle grit
damaging a blade, I know they are hitting nails at the least.
Anyone know anything about these blades and what to look for as far as
brands or labeling?
metal, such as nails, electrical cables, light duty pipes, and so on.
They are made for demolition, and patricularly used by Fire Departments
for fast cutting holes in roofs, walls, and other stuff. Supposedly they
hold up well and stay sharp for most cutting. I doubt they would cut
thru a 2" steel pipe. but can cut copper pipes, wiring, and nails.
I have asked the workers at several building supply stores, and was told
that sort of thing does not exist. Well, I have seen firemen cutting
thru shingled roofs with a chainsaw, and besides all the shingle grit
damaging a blade, I know they are hitting nails at the least.
Anyone know anything about these blades and what to look for as far as
brands or labeling?
burfordTjustice
Jan 25, 2017, 7:33:31 AM1/25/17
to
On Wed, 25 Jan 2017 06:04:37 -0600
smile...@what-where.how.dot.com.no wrote:
> Metal Cutting chainsaw blades
http://www.cuttersedge.com/products
https://www.google.com/search?q=Metal+Cutting+chainsaw+blades&sourceid=ie7&rls=com.microsoft:en-US:IE-Address&ie=&oe=&gws_rd=ssl
smile...@what-where.how.dot.com.no wrote:
> Metal Cutting chainsaw blades
http://www.cuttersedge.com/products
https://www.google.com/search?q=Metal+Cutting+chainsaw+blades&sourceid=ie7&rls=com.microsoft:en-US:IE-Address&ie=&oe=&gws_rd=ssl
Phuck Phuck & Phuck Attn at Law
Jan 25, 2017, 8:23:57 AM1/25/17
to
Ralph Mowery
Jan 25, 2017, 10:21:27 AM1/25/17
to
In article <hk4h8ct8716rkikra...@4ax.com>,
smile...@what-where.how.dot.com.no says...
At 10 to 20 times or more than the normal chain saw chains it is
doubtful that many places would have them. Then when it is neede to get
the job done in a hurry, the fire fighters don't care that much about
the equipment. Even if they ruined a chain to put out each fire, it
would be worth it.
smile...@what-where.how.dot.com.no says...
doubtful that many places would have them. Then when it is neede to get
the job done in a hurry, the fire fighters don't care that much about
the equipment. Even if they ruined a chain to put out each fire, it
would be worth it.
Fred McKenzie
Jan 25, 2017, 12:11:07 PM1/25/17
to
In article <MPG.32f28c85d...@news.east.earthlink.net>,
That is a good point. But I found a chain that is apparently marketed
to firefighters. There may be others, but this is the first I found.
See <http://www.carbidechain.com/cobracarbidechain.php>.
Fred
to firefighters. There may be others, but this is the first I found.
See <http://www.carbidechain.com/cobracarbidechain.php>.
Fred
0 new messages