I have maple kitchen cabinets finished with
WFS (wood finishers supply) stain then coated
with polyurethane.
We want to refinish the cabinets by painting them
and have been told lacquer is better than an oil
paint (dries quicker, harder finish).
I am worried about adhesion of the lacquer to the poly.
Is there a primer that I can put over the poly so that
the lacquer will adhere ?
A local sherwin williams dealer says no way, but a
painting contractor says yes.
Thanks in advance !
https://www.rd.com/offer/fh/issue/index.jsp?wtGroup=SPLASH_SUB&wtID=TFH_SUB_3&lid=20
"Jack Milft" <zestri...@yahoo.com> wrote in message
news:25b08ca.04100...@posting.google.com...
Unless a barrier coat (shellac or other suitable sealer) is applied first
the solvents in a lacquer will eat up the poly creating a horrible mess.
It is true that lacquer dries quicker but unless you have a sprayer and/or
are experienced you will find it difficult to apply. As to "harder", maybe
yes, maybe no...depends on the lacquer. You are far better off using an oil
paint. If you want hard, use a urethane paint rather than alkyd. Either
would require sanding of the cabinets to the point of deglossing to provide
a surface to which the paint will adhere.
Frankly, I rather doubt you are going to be real happy with the results
regardless of what you use. Apparently, you are inexperienced and it is not
an easy task to get a good finish with a brush. Especially with a gloss
product...dust, brush marks, holidays (missed places), runs, overlaps...
--
dadiOH
_____________________________
dadiOH's dandies v3.0...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
____________________________