Unconfirmed method to use Balrog, Juni & Juli
Kao Megura
Hey all,
I was cruising some Japanese sites for new info. on SFZ3 and they were all
talking about this. I can't take credit for any info. on this page--it
all goes to (tokuyama.ac.jp/home/~msnakamo/index.html) and to "Ura no Ura"
(www2.airnet.ne.jp/~tac/) Remember, my translating skills suck, so sorry
if this doesn't work.
Move the cursor to Karin and wait there for three seconds,(?) then:
For Balrog, go to any of the random select squares, hold START and press
any button.
For Juni or Juli, go to any of the random select squares. There are four
of them in the upper right, left, and lower right, left corners or the
diamond. If you're on the 2P side, you can access the lower-left or
upper-right ones; I assume it's the opposite for 1P.
Then, press in the corresponding direction and press a button while doing
so. For instance, if you were in the upper left corner, you'd press up +
button for Juli, or left + button for Juni. If you were in the lower
right corner, you'd press down + button for Juli, or right + button for
Juni, and so on.
Well, hope it works, have fun, and I'll stop posting unconfirmed info. now :)
- Kao Megura -
e-me at : kmegura (at) yahoo (dot) com
stop by : http://i.am/kao (or) http://kao.home.ml.org
get this : I once saw a guy mash the buttons during a Super Taunt.
my hell : I watched "Regis & Kathie Lee" just to see the Pumpkins
play, and then they perform my favorite song at the very
end of the stupid show and it's cut off by commercials.
David Spence
Kao Megura (kme...@yahoo.com) writes:
> Hey all,
>
> I was cruising some Japanese sites for new info. on SFZ3 and they were all
> talking about this. I can't take credit for any info. on this page--it
> all goes to (tokuyama.ac.jp/home/~msnakamo/index.html) and to "Ura no Ura"
> (www2.airnet.ne.jp/~tac/) Remember, my translating skills suck, so sorry
> if this doesn't work.
>
> Move the cursor to Karin and wait there for three seconds,(?) then:
>
> For Balrog, go to any of the random select squares, hold START and press
> any button.
>
> For Juni or Juli, go to any of the random select squares. There are four
> of them in the upper right, left, and lower right, left corners or the
> diamond. If you're on the 2P side, you can access the lower-left or
> upper-right ones; I assume it's the opposite for 1P.
>
> Then, press in the corresponding direction and press a button while doing
> so. For instance, if you were in the upper left corner, you'd press up +
> button for Juli, or left + button for Juni. If you were in the lower
> right corner, you'd press down + button for Juli, or right + button for
> Juni, and so on.
>
> Well, hope it works, have fun, and I'll stop posting unconfirmed info. now :)
>
well.....we tried here at gametime, and couldn't get it to work. still
having fun playing guyz we don't usually use though. andyone get this to work?
--
^^^d.spence ==>dub...@freenet.carleton.ca<== d.sp...@utoronto.ca
<<ex astris, scientia>> spe...@medlib.georgetown.edu
SF2&3 code: Dh+ N El :P !ARK v 2+ @B2/ECC2 t m+ tm-:- r- n+@ AC- cf o+(!SFA)
<<..."free advice is seldom cheap"...>>
Zany Wizard
David Spence wrote:
Kao Megura (kme...@yahoo.com) writes:
> Hey all,
>
> I was cruising some Japanese sites for new info. on SFZ3 and they were all
> talking about this. I can't take credit for any info. on this page--it
> all goes to (tokuyama.ac.jp/home/~msnakamo/index.html) and to "Ura no Ura"
> (www2.airnet.ne.jp/~tac/) Remember, my translating skills suck, so sorry
> if this doesn't work.
>
> Move the cursor to Karin and wait there for three seconds,(?) then:
>
> For Balrog, go to any of the random select squares, hold START and press
> any button.
>
> For Juni or Juli, go to any of the random select squares. There are four
> of them in the upper right, left, and lower right, left corners or the
> diamond. If you're on the 2P side, you can access the lower-left or
> upper-right ones; I assume it's the opposite for 1P.
>
> Then, press in the corresponding direction and press a button while doing
> so. For instance, if you were in the upper left corner, you'd press up +
> button for Juli, or left + button for Juni. If you were in the lower
> right corner, you'd press down + button for Juli, or right + button for
> Juni, and so on.
>
> Well, hope it works, have fun, and I'll stop posting unconfirmed info. now :)
>
> well.....we tried here at gametime, and couldn't get it to work. still
> having fun playing guyz we don't usually use though. andyone get this to work?
> --
>
I have gotten all 3 codes to work. I'm in Ontario, and the arcade I work in
(Wizard's Castle) has a Final version of SFA3. I read the original post last night,
so I went over and tried them today. They work (YES! :) )
and it's so simple. To confirm the codes:
Go to Karin and wait 3-5 seconds. Then ---
--For balrog: go to a random square and press start+any button at the same time.
--For Juni : go to a random square and press UP+any button if you're on a top
random spot, DOWN+any button if you're on a bottom random spot.
--For Juli : go to a random square and press LEFT+any button if you're on a
left side random spot, RIGHT+any button if you're on a right side random spot.
Your character appears, and Bison's storyline appears to run. On the VS screen you
see Bison's pic with a clear silluette of the fighter you picked.
Ah balrog, how did I ever live without you?? :)
Zany Wizard
teh...@crl.com
Do you have to wait EXCATLY 3 seconds?? Does it matter if you just let it
wait for a few seconds more??
And do you HOLD Start when you're waiting?
DOes it matter WHICH random square you go to or how fast you go to it for
Balrog? Do you have to keep holding down start and any button until Balrog
appears?
I'm sorry if I'm an idiot but I just can't seem to get this simple code to
work...
In article <35CC82FD...@rogerswave.ca>,
-----== Posted via Deja News, The Leader in Internet Discussion ==-----
http://www.dejanews.com/rg_mkgrp.xp Create Your Own Free Member Forum
Lucifer Sam
appropriate code fairly quickly once you hit the random select box, or
you'll end up picking up another character.
--
lucifer sam:
"To contact me, kindly prefix my email address with 'lu'."
Banshee
Zany Wizard <zany...@rogerswave.ca> a écrit dans l'article
<35CC82FD...@rogerswave.ca>...
> I have gotten all 3 codes to work. I'm in Ontario, and the arcade I work
in
> (Wizard's Castle) has a Final version of SFA3. I read the original post
last night,
> so I went over and tried them today. They work (YES! :) )
Hmm... where is that arcade exactly? and does anyone know if A3's anywhere
else in Ontario?
I'm in Montreal, and it seems all the arcades here seem not to ant to get
it...
Banshee
teh...@crl.com
I am thinking... could it be because Balrog has never even "appeared"
on these machines I'm testing the code on... I mean .. for this code to work,
does someone have to have fought the computer Balrog first? The SFA3
machines here are pretty new, and have been constantly played by people...
so I doubt that anyone has actually even seen Balrog appear yet...
> I have gotten all 3 codes to work. I'm in Ontario, and the arcade I work in
> (Wizard's Castle) has a Final version of SFA3. I read the original post last
night,
> so I went over and tried them today. They work (YES! :) )
>
D.A. Konjek
the greatest, but at least the game is there (it's .50/??). The coolest
part is, we also got Time Crisis 2 ($1/game) AND Daytona 2 ($2/game).
Don't know how long they'll been there, but it's about time we got some
new games up here.
Does anyone else think Rose's Scarf Move (QCF+K) is useless outside of a
combo? It seems like everytime I tired the move outside of a combo they
would do a cr. jab and stop me cold. Is there anything else that they
weakened on Rose that I should be aware of?
In article <01bdc35a$2a624c40$aecf60cf@default>,
Banshee <bans...@hotmail.com> wrote:
>
>Zany Wizard <zany...@rogerswave.ca> a écrit dans l'article
><35CC82FD...@rogerswave.ca>...
>
>> I have gotten all 3 codes to work. I'm in Ontario, and the arcade I work
>in
>> (Wizard's Castle) has a Final version of SFA3. I read the original post
>last night,
>> so I went over and tried them today. They work (YES! :) )
>
Shadowryu
Banshee wrote:
> Zany Wizard <zany...@rogerswave.ca> a écrit dans l'article
> <35CC82FD...@rogerswave.ca>...
>
> > I have gotten all 3 codes to work. I'm in Ontario, and the arcade I work
> in
> > (Wizard's Castle) has a Final version of SFA3. I read the original post
> last night,
> > so I went over and tried them today. They work (YES! :) )
>
> Hmm... where is that arcade exactly? and does anyone know if A3's anywhere
> else in Ontario?
>
SFA3 is at Lime Ridge Mall in Hamilton, Ontario, although to be honest I'd
like to know where Wizard's Castle is too, cause Lime Ridge's joysticks are
awful.
> I'm in Montreal, and it seems all the arcades here seem not to ant to get
> it...
>
> Banshee
Bummer...to be honest, I was not expecting Hamilton to get an SFA3 so quickly
so I count myself lucky. Hope one shows up in your area soon.
Shadowryu^_^
Banshee
D.A. Konjek <konj...@muss.cis.McMaster.CA> a écrit dans l'article
<6ql10o$f...@muss.CIS.McMaster.CA>...
> There's a SFA3 in Hamilton, Ontario at Limeridge Mall. Joysticks aren't
> the greatest, but at least the game is there (it's .50/??). The coolest
> part is, we also got Time Crisis 2 ($1/game) AND Daytona 2 ($2/game).
> Don't know how long they'll been there, but it's about time we got some
> new games up here.
>
Yikes! Over here, TC2 is .50, and Daytona 2 is .75 (the Big F***ing Moving
machine ^_^) A3 is supposed to be here "soon", and it should be a quarter
(.25/.25)
We should make tourneys up here. American players would have MUCH more than
their money's worth ^_^
Todd, how about moving the SFECC up here? :)
Banshee
Yander
weeks before you can do these codes. Most likely you've done them right a
few times, but the machine hasn't been around long enough. If it doesn't
work, try it again in another week or so.
~~ Yander
Jason Watson
>Hmm, I haven't been able to get any version of this "code" to work.
>I am thinking... could it be because Balrog has never even "appeared"
>on these machines I'm testing the code on... I mean .. for this code to work,
>does someone have to have fought the computer Balrog first? The SFA3
>machines here are pretty new, and have been constantly played by people...
>so I doubt that anyone has actually even seen Balrog appear yet...
For the code to work, Balrog, juni, & juli's name must appear on highscore
table first.
WhoaMoses
>
>For the code to work, Balrog, juni, & juli's name must appear on highscore
>table first.
uh, how can they appear on the high score table if you can't pick them???????
it's impossible
Ultima
No it's not. They're reported to be time-released. Wait until they show
up on the rankings screen (how long it takes,I don't know), and then
you'll be able to input the codes for them.
U-Man
Tony "Chun" Lim
WhoaMoses wrote:
>
>
> uh, how can they appear on the high score table if you can't pick them???????
> it's impossible
If you take notice of the high scores ranking chart, the characters name
apear in the places were where other have yet to acheive those scores. For
instance, when you turn on the machine in the morning and no one has had the
chance to play yet, the high score screen reads as all the available
characters. Before Balrog, Juni and Juli are available, their names are ommited
and the lowest rank is 25. After they are time released, the lowest rank is
then 28 and their name appear as the lowest ranking players. So no, its not
impossible.
Tony "Chun" Lim
WhoaMoses
well now i feel stupid
damn capcom time release shit
i want balrog now dammit! i've waited for years and now i gotta wait 3 more
weeks???
Kenta20
characters? I heard from a reliabe source that the characters will be input in
like the one for Marvel Vs. Capcom... and not like a EX2 PSX board. <which is
Time released.>
Solid Snake
been, any new tournies?