trackball question

[NaTaS]

one question concerning i-pac/j-pac/optipac, not sure which one.. but the
one that works with spinners and trackballs..

will it work with wico trackballs or will it only work with happ trackballs.
one that i saw had a molex connector, do you just cut that off to wire to
the *-pac or can you buy a connector to go to the *.pac. if so who sells
this connector

thanx for any information you can share with me in advance.

[Slor]

Despite all prevention efforts, "NaTaS" <jam...@charter.net> wrote in
news:vc5gmn2...@corp.supernews.com:

It's the Opti-Pac, and yes it works just fine with the Wico. I have that
setup, and I just yanked the metal leads out of the plastic connector
housing and plugged them into the Pac. Works great!

--
Slor

[NaTaS]

thanx for the information. with the optipac, will it recognize as a mouse?
so you can use it for the main interface for windows? and does it have a
place for buttons to connect to? once again thanx for the information.

"Slor" <sl...@comcast.net> wrote in message
news:Xns937BC48EBFB9...@130.133.1.4...

[Slor]

Despite all prevention efforts, "NaTaS" <jam...@charter.net> wrote in

news:vc5rp31...@corp.supernews.com:

> thanx for the information. with the optipac, will it recognize as a
> mouse? so you can use it for the main interface for windows? and does
> it have a place for buttons to connect to? once again thanx for the
> information.
>
>

Sure will, and sure does. I use the trackball to navigate around, and I
have two buttons on the control panel connected to the mouse button inputs.

--
Slor

[Greg]

> thanx for the information. with the optipac, will it recognize as a
mouse?

Yes

> so you can use it for the main interface for windows?

Yes

> and does it have a
> place for buttons to connect to?

Yes

Here's the Ultimarc site for more information:
http://www.ultimarc.com/optipac1.html

Greg