Juergen Kah
unread,Feb 25, 2015, 3:31:46 PM2/25/15You do not have permission to delete messages in this group
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to
Hi,
I am still using Palm Centro.
Bought two new batteries via Amazon, not the original Palm ones.
Problem = both batteries cannot be recharged.
When battery plug into Palm, Centro says:
"Battery is VERY low".
Even after 4 hrs of recharging, battery symbol at the top is empty.
I even got replacements, same problems (used original Palm power supply)
Now tried to check the voltage and was very astonished.
Centro-battery has 3 contacts, I was measuring with description on top
and viewing at the contacts...
1. original battery from my Centro is 3,7 VDC / 1150 mAh
contacts (plus/minus) here named re to my voltmeter, so I found
Plus is always the left contact.
+ - x
|__|
3,38 V
+ x -
|_____|
3,88 V
2. batteries via Amazon= For Palm Centro Li-Ion Battery 3,7V 1200 mAh
after 4 hrs recharge time... Plus is always contact in the middle !!!
- + x
|__|
1,53 V
x + -
|__|
1,53 V (plus)
In internet I haven't found any hint about which is which for the contact.
Is there someone who knows still a bit about batteries for Palm?
Perhaps next generation Palms by HP has different contacts but still
identical size?
Or is there someone with HP-Palm able to check polarity of the battery?
Or is it possible, that Li-Ion-batteries change polarity themselves?
Juergen