Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
New CO , Mitel SX200 ground start problems
0 views
Skip to first unread message
BOB
Feb 20, 2008, 9:05:09 PM2/20/08
to
Recently our local CO installed a new switch. Now we are having
problems with our Mitel SX-200
ground start lines. Seems the SX-200 doesnt hold the ground start long
enough for the new CO to
recognize a call for dial tone. The SX-200 will pull a dial tone
about 30 percent of the time. I dont
see that the ground start timing is variable on the Mitel SX-200. I
hope the CO can make some
sort of accomodation. Anybody run into this kind of a problem on some
of the newer CO switches
they are installing around the country Id appreciate hearing what you
were able to do about it.
Bry
problems with our Mitel SX-200
ground start lines. Seems the SX-200 doesnt hold the ground start long
enough for the new CO to
recognize a call for dial tone. The SX-200 will pull a dial tone
about 30 percent of the time. I dont
see that the ground start timing is variable on the Mitel SX-200. I
hope the CO can make some
sort of accomodation. Anybody run into this kind of a problem on some
of the newer CO switches
they are installing around the country Id appreciate hearing what you
were able to do about it.
Bry
0 new messages