Driver for Microtek Scanmaker 3600
pg
The original CD that comes with it is missing, so I went to Microtek's
ftp site - ftp://ftp.microtek.com/microtek/pcfiles/ - looking for one.
I remember that the driver for Scanmaker 3600 has the name of
drv_sw5** (stand for Scan Wizard 5) so I was elated to find
drv_sw5_v5_991_ad.exe among the files available.
However, under the same directory I also notice the "Scan Wizard Pro"
are there as well.
Question: Can the "Scan Wizard Pro" software be used for my Microtek
Scanmaker 3600 scanner?
BTW, the latest version of Scan Wizard Pro is version 7.04 ---
drv_swpro_v7_04_ad.exe
Old Gringo
Keyboard And Pecked Out The Following::
recommended for your scanner and OS This is on XP http://xrl.in/1k57
--
Old Gringo
Just West Of Nowhere
Enjoy Life And Live It To Its Fullest
http://www.NuBoy-Industries.comm
CSM1
Start Here and follow the prompts for the correct driver.
http://support.microtek.com/downloads/index.phtml
--
CSM1
http://www.carlmcmillan.com
--
"Old Gringo" <NoE...@ThisOldHouse.Con> wrote in message
news:9Oqkl.4139$PE4....@nlpi061.nbdc.sbc.com...
Lil' Dave
news:280db096-0b69-493d...@40g2000prx.googlegroups.com...
Scanwizard was provided with both my Microtek flatbed scanners in the past.
Other than installing that, I've never had to install any other software for
either for operation. Both worked in XP and Millenium. Last version I
downloaded was 6.01 Pro version from the microtek website 2 years ago.
Better look here for latest Pro version and supported scanners:
http://www.download.com/Microtek-ScanWizard-Pro/3000-2118_4-38388.html
Dave
pg
I have downloaded the Scan Wizard 5 version 6.32, dated Oct, 05, 2007
and have installed it on my PC.
Then something really weird happened.
I hooked up everything, and "Scanner Finder" could found the scanner
without any problem, with the "Scanmaker 3600: STI, ID 0" message.
However, when I call up the "Microtek Scanner Configuration", I got
the error message:
"The scanner is not ready! Please check the scanner connection."
When I launch the SW5 software, I got the following message:
"Can't find scanners.
Use scanner probe to find a scanner."
And when I click on the "Yes" button, I got a "Scanner list", with the
ID "0" for Scanmaker 3600, Ver. 1.0
As far as the scanner goes, yes, IT IS THERE !!
I even checked it in the device manager, and yes, IT IS THERE !!
What I do not understand is this ---
How come neither of the "scanner configuration" nor the "Scan Wizard
5" able to find the scanner?
Did I do anything wrong??
Please help !!
Thank you all again for your help !!!
On Feb 10, 9:00 pm, "Lil' Dave" <spamyours...@virus.net> wrote:
> "pg" <pen...@catholic.org> wrote in message
>
> news:280db096-0b69-493d...@40g2000prx.googlegroups.com...
>
>
>
> >I am looking for driver for Microtek Scanmaker 3600.
>
> > The original CD that comes with it is missing, so I went to Microtek's
> > ftp site -ftp://ftp.microtek.com/microtek/pcfiles/- looking for one.
pg
> On Tue, 10 Feb 2009 22:39:28 -0800 (PST), pg wrote:
> > "The scanner is not ready! Please check the scanner connection."
>
>
> I don't know which is the right order, but the scanner has to be plugged
> in properly before/after installing the software (I'd guess after).
> Otherwise it might be ignored.
>
> Mine can't be used via an USB hub.
>
> - Martin
I have plugged and unplugged the scanner, rebooted the PC several
times, and even un-installed and re-installed the software, and still
I got the error !!!
I checked the scanner as well, no problem.
Oh well ... This is getting very very weird !!
Lil' Dave
----------
Forgot to mention both my previous MicroTek scanners were scsi connected
using scsi ID 6 with active termination. I started out early with flatbed
scanners using the old printer port connection. Scsi seems to work best
both for connection, and, actual throughput without worry of interruption.
--
Dave
Ian Jackson
<spamyo...@virus.net> writes
just stopped working. [XP Home, BTW.] However, it's still OK on a laptop
using XP Professional.
I've uninstalled and reinstalled the original software, and also used
the latest TWAIN driver, run a registry repair, re-done the un- and re-
installations etc, but I always get a report saying that there is no
TWAIN driver.
Yes, the computer knows the scanner is there, and says it's working -
but unless it can recognise the TWAIN driver, it isn't going to work.
Fortunately, it WILL work (although with far fewer options) with two of
my little-used imaging programs - Photshop 7 and Microsoft Paint. These
can use the WIA driver, and that hasn't been affected.
http://www.scanhelp.com/ScanEdu/wiascanners.html#List
http://en.wikipedia.org/wiki/Windows_Image_Acquisition
I've done a bit of digging in the newsgroup and forum archives, and it
seems that this sudden failure of various scanners to work may be linked
to one of the Windows updates. There are countless helpful suggestions
but, unfortunately, I've only found one person who positively said "I
did this, and it fixed it". I think that alt.comp.periphs.scanner (which
I have just found) might provide the best leads, but I have only started
to peruse the old posts. I think this was one of them.
<http://thedailyreviewer.com/xphelp/view/xp-twain-drivers-102500249#10189
7202>
I'm in two minds as whether to accept the fact that I still can use the
scanner (but not like I used to) and get on with my life, or to pursue a
fix, and possibly screw up my PC in the process!
--
Ian
--- Posted via news://freenews.netfront.net/ - Complaints to ne...@netfront.net ---