unable to hot sync
Jeff Brock
the cable may be bad.
Andy wrote:
> Try using the port for something else (mouse etc) to see if it functions
> properly. It is probably a config problem, which could be as simple as
> Control Panel, or as fiddly as dip switches in the box.
>
> Good luck !
>
> Eclipse219 <eclip...@aol.com> wrote in message
> news:19990626220508...@ng-cd1.aol.com...
> > I am unable to hot sync with my pc.
> >
> > I am receiving a message that states that my computer is "unable to locate
> com
> > port 1" or any other com port I specify that the hot sync is connected to
> .
> >
> > I have tried my cradle with another computer and am still unable ot hot
> sync.
> >
> > any assistance would be appreciated.
> >
> > please reply to eclip...@aol.com
> >
> > Thank you
> >
Oprea Marius
on My Comp, select Properties, then in the tabbed dialog box,select tab
Device Manager, in the tree below expand branch Ports [COM and LPT])
If there's no COM1, reset the computer, enter BIOS setup (for example hold
down Del key while booting) and set up the desired COM ports (they may not
be enabled on the board). If this is the case, and you succesfully enabled
one or more ports, when Windows loads it will automatically detect and
install your new port, ready for use. Just take care that the settings are
correct and consistent between Windows and the Palm desktop software (check
Hotsync\setup...\local).
Hope that'll work for you.
Eclipse219
Andy
properly. It is probably a config problem, which could be as simple as
Control Panel, or as fiddly as dip switches in the box.
Good luck !
Eclipse219 <eclip...@aol.com> wrote in message
news:19990626220508...@ng-cd1.aol.com...
Roberto Castillo
I came home just in time to see that eclip...@aol.com (Eclipse219)
had written:
>I am unable to hot sync with my pc.
>
>I am receiving a message that states that my computer is "unable to locate com
>port 1" or any other com port I specify that the hot sync is connected to .
>
>I have tried my cradle with another computer and am still unable ot hot sync.
>
>any assistance would be appreciated.
Try a soft reset. It worked for me.
--
"I am First Omet'iklan, and I am dead. As of this moment, we are all
dead. We go into battle to reclaim our lives. This we do gladly, for
we are Jem'Hadar. Remember, victory is life."
-- Omet'iklan
"I am Chief Miles Edward O'Brien. I'm very much alive, and I intend
to *stay* that way."
-- O'Brien
"I'm worried about Bart. Today, he's sucking people's blood,
tommorrow he might be smoking."
-Marge Simpson
Roberto Castillo
cast...@enteract.com
Sam DiSuarre
for me. Thank you.