Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

((LINK)) Windsim 5 0 64 Bit

1 view
Skip to first unread message

Ana Vezina

unread,
Jan 25, 2024, 2:53:14 PM1/25/24
to
<div>WindSim does not endorse, approve, certify or control these external Websites, and is not responsible for the accuracy, timeliness, completeness, efficacy, merchantability, or fitness for any particular purpose or correct sequencing of information located at such websites. Rather, the links on this Website to other Websites are provided solely as a convenience to users of this Website.</div><div></div><div></div><div>So I have now fitted both fans to the Cytron MD10 motor shield, with fixing both fans to the A&B terminals (meant for one motor control). There was no need to cut any traces on the board/power supply link between it and the Arduino Uno, as there is no link! (I think :D) In my view this makes it easier, as the USB cable is plugged into the Arduino Uno and PC at all times, so it has its power supply, and the motor shield has its own as before with the Arduino motor shield. It also means if you want to sell it later, you haven't taken a knife to anything which might reduce people's interest in it. So it was simpler to setup, and can now provide 10amps (15 at peak) to whatever is connected to the A&B motor terminals, although I still only have the 3amp power supply as that's all I currently need. In Simhub when I setup the Arduino, under the SHAKEIT PWM Outputs section, just select 1 (not 2 as with the Arduino motor shield).</div><div></div><div></div><div></div><div></div><div></div><div>((LINK)) Windsim 5 0 64 Bit</div><div></div><div>Download File: https://t.co/LHD0Ipttwu </div><div></div><div></div><div>I've tried connecting some PWM 140mm fans, which work correctly all the way down to 0rpm. I can set any level on the 'Static Wind Effect' sliders and the fans work as they should. I can even use a 4pin pwn fan. The issue with these fans is they are only rated to 1500rpm max, which isn't enough output for the windsim 'Speed with Curving' Effect.</div><div></div><div></div><div>Looking at your frizzy it appears it should work however I know nothing about the fans and their requirements so at this point I will not say you have it connected properly. Posting links to the technical information on the hardware would help us help you.</div><div></div><div></div><div>At WindEnergy Hamburg 2014, you will find us at Exhibition stand A1-206, co-exhibiting with software company WindSim. WindSim pioneered the use of CFD technology to optimize wind turbine placement. The WindSim software is a modern wind farm design tool (WFDT) where you can design more profitable wind farms. More information about WindSim at www.windsim.com.</div><div></div><div></div><div>i see it is a common mistake, this is very very serious on the part of tp-link. I asked Amazon for the replacement, it arrives tomorrow but I really think it is a very serious software error. if anyone from support can give us some link to update or fix this problem.</div><div></div><div></div><div></div><div></div><div></div><div> dd2b598166</div>
0 new messages