Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Minolta Dimage F-3000 (a.k.a. Scan Multi) Film Masks
9 views
Skip to first unread message
Hauke Fath
Nov 27, 2015, 5:40:41 AM11/27/15
to
Hi,
a while back, I pulled a Minolta Scan Multi F 3000 from ?bay, with an
eye towards MF scanning. The scanner came with the MH-M1 film holder,
but not with the masks for it; and while you can just put in film
anyway, there is flare.
Does anyone out there have this scanner model (or the F 3200, which is
supposed to be mechanically identical), and could provide me with
measurements and / or a scan of the film masks? I could then make my own
from cardboard or plastic foil.
Thanks,
Hauke
--
Now without signature.
a while back, I pulled a Minolta Scan Multi F 3000 from ?bay, with an
eye towards MF scanning. The scanner came with the MH-M1 film holder,
but not with the masks for it; and while you can just put in film
anyway, there is flare.
Does anyone out there have this scanner model (or the F 3200, which is
supposed to be mechanically identical), and could provide me with
measurements and / or a scan of the film masks? I could then make my own
from cardboard or plastic foil.
Thanks,
Hauke
--
Now without signature.
Stephen
Nov 27, 2015, 3:21:10 PM11/27/15
to
On Fri, 27 Nov 2015 11:40:41 +0100, dont.spa...@googlemail.com
(Hauke Fath) had a flock of green cheek conures squawk out:
Here's a scan of the masks I have:
https://www.dropbox.com/s/8ty88fhf6dse8hm/ScanMultiMasks.pdf?dl=0
The APS & 16mm have guide rails for the film.
--
Stephen
A truly happy person is one who can enjoy the scenery on a detour.
(Hauke Fath) had a flock of green cheek conures squawk out:
https://www.dropbox.com/s/8ty88fhf6dse8hm/ScanMultiMasks.pdf?dl=0
The APS & 16mm have guide rails for the film.
--
Stephen
A truly happy person is one who can enjoy the scenery on a detour.
Hauke Fath
Nov 28, 2015, 9:17:06 AM11/28/15
to
Stephen <y...@its.invalid> wrote:
> >Does anyone out there have this scanner model (or the F 3200, which is
> >supposed to be mechanically identical), and could provide me with
> >measurements and / or a scan of the film masks? I could then make my own
> >from cardboard or plastic foil.
>
> >Does anyone out there have this scanner model (or the F 3200, which is
> >supposed to be mechanically identical), and could provide me with
> >measurements and / or a scan of the film masks? I could then make my own
> >from cardboard or plastic foil.
>
> Here's a scan of the masks I have:
> https://www.dropbox.com/s/8ty88fhf6dse8hm/ScanMultiMasks.pdf?dl=0
>
> The APS & 16mm have guide rails for the film.
Thanks, that's great!
> https://www.dropbox.com/s/8ty88fhf6dse8hm/ScanMultiMasks.pdf?dl=0
>
> The APS & 16mm have guide rails for the film.
Would it be possible for you to provide me with the measurements for the
6x6 mask - outside, inside, frame width, distance of the mask holes? I
think I could derive the other masks' sizes from that.
Thanks again,
hauke
--
Now without signature.
Stephen
Nov 28, 2015, 3:13:20 PM11/28/15
to
If you print the pdf as actual size, it should be the same as below.
For the 6x6 mask:
---------------------------------------------------
93.4mm x 71.3mm - outside
65.5mm x 65.5mm - inside
3.6 mm x 3.2mm - oblong hole (side with one short diagonal cut)
21.5mm - center of oblong hole to side with short diagonal cut
3.2mm - round hole (side with 2 diagonal cuts)
65.8mm - center to center of holes
2.7mm distance of the slot for the film guide rail.
4.1mm to center of hole that's under the film rail guide slot.
2.7mm - film rail guide slot height
67.1 - film rail guide slot length
The bottom notch between the holes clear is to clear the latch.
On Sat, 28 Nov 2015 15:17:05 +0100, dont.spa...@googlemail.com
For the 6x6 mask:
---------------------------------------------------
93.4mm x 71.3mm - outside
65.5mm x 65.5mm - inside
3.6 mm x 3.2mm - oblong hole (side with one short diagonal cut)
21.5mm - center of oblong hole to side with short diagonal cut
3.2mm - round hole (side with 2 diagonal cuts)
65.8mm - center to center of holes
2.7mm distance of the slot for the film guide rail.
4.1mm to center of hole that's under the film rail guide slot.
2.7mm - film rail guide slot height
67.1 - film rail guide slot length
The bottom notch between the holes clear is to clear the latch.
On Sat, 28 Nov 2015 15:17:05 +0100, dont.spa...@googlemail.com
(Hauke Fath) had a flock of green cheek conures squawk out:
0 new messages