Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
GA-6BA Freq Ratio Setting for PIII 1.0GHz
0 views
Skip to first unread message
johnf
Oct 23, 2002, 8:46:12 PM10/23/02
to
Have a GA-6BA Ver 3.0, F1 Bios, and need the Freq Ratio ( X ?) setting for
Intel Pentium III 1.0GHz , 256KB, 100MHz FSB. Have the settings for up to
PIII 600MHz but the version 3.0 board can take a 1.0Ghz processor? Thanks
in advance for your help.
Intel Pentium III 1.0GHz , 256KB, 100MHz FSB. Have the settings for up to
PIII 600MHz but the version 3.0 board can take a 1.0Ghz processor? Thanks
in advance for your help.
Josey
Oct 24, 2002, 3:38:14 AM10/24/02
to
"johnf" <jnfe...@comcast.net> wrote in message
news:kOucnYav3eF...@comcast.com...
The 1Ghz processor will work as long as its coppermine cored.
There is no need to set dipswitches for frequency as I recall, as the
process has fixed frequency.
When I took my 550 slot 1 out of a 6ba I just plugged my 1ghz in and it
worked without changing anything else (apart from going to latest bios 1st).
Jc.
abenn
Oct 24, 2002, 4:51:10 AM10/24/02
to
My GA-6BA manual only shows DIP switch settings up to 950MHz (1,2,3&4 all
set to OFF). JP8 should be set for 1,2&3 OFF (no jumper connected) for
100MHz FSB.
abenn
Alien Zord
Oct 24, 2002, 5:22:34 AM10/24/02
to
setting. But, if you want perfection then the new switch table is here (the
first item on the green list):
http://www.giga-byte.com/support/support.htm
0 new messages