I have a problem with my Asus A7V133 board and IBM DTLA-307030 hard drive.
When i connect the hard disk on the Promise Ultra-100 controller, i can't
boot on the floppy disk neither on the CD-Rom drive (i can boot perfectly
when the drive is disconnected). I have tried with a western digital 20 Gb
with no problem at all.
I have tried with 2 different units of the IBM HDD with the latest bios
available (1003)
Any idea ?
Thanks in advance
Guillaume
I have a problem with the IBM DTLA 307045 when I connect it on the Promise
controller.
The computer boots normally but after a few moment it freezes.
So I connect my IBM to the IDE-port and had no
problems anymore.
Wil Kelleners
"Guillaume" <fg...@dfg.se> schreef in bericht news:97dru0$ksd$1...@wanadoo.fr...
Remove your NIC and it´ll work fine ..; )
Cheers
Howi
Rich
"Holger Mansen" <Ho...@pemail.net> wrote in message
news:97eg6g$ebq$1...@kilbeggan.xlink.net...
Trick trick
"Holger Mansen" <Ho...@pemail.net> wrote in message
news:97eg6g$ebq$1...@kilbeggan.xlink.net...
>
What do you mean by NIC ?
Wil Kelleners
"Holger Mansen" <Ho...@pemail.net> schreef in bericht
news:97eg6g$ebq$1...@kilbeggan.xlink.net...
regards
Alex
"Wil kelleners" <w.kel...@home.nl> schrieb im Newsbeitrag
news:wtJm6.112580$z7.8...@dbsch1.home.nl...
I've a NIC installed, but the problem was also before installing the NIC.
I'm an Italian Computer Shop owner, and I've noticed this problem on every
PC with A7V + IBM Hard Drive on ATA-100 controller that I've sold.
What is it !!
Whe're NOT using 1007 bios. Still trying to download it !!
Thanks if anybody answers !
Bye,
Pete.
"Alex" <flyin...@gmx.net> ha scritto nel messaggio
news:97h3no$p265k$1...@ID-52499.news.dfncis.de...