Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Water Cooling - Advice re positioning the radiator...

5 views
Skip to first unread message

Ian R

unread,
Aug 7, 2011, 5:57:35 PM8/7/11
to
Hi,

I'm planning to get the new Corsair Hydro H100.

I'd appreciate some advice about the placement of the radiator.

I will be fitting it inside a Coolermaster stacker STC-01 case.

There is a grilled aperture in the base of the tower which is just the right
size and it would be easy and very convenient to mount the rad on the
grille. See image here http://www.tweakguides.com/images/Hardcon_10.jpg

I'm just not sure how effective it would be to have the radiator exhaust
fans venting downwards to the floor. There are wheels on the tower so its
approx 30mm off the floor.

Does anyone have an idea how well this might work?

Thanks for your time.

Ian I^)

Paul

unread,
Aug 7, 2011, 7:42:55 PM8/7/11
to

The empirical approach would be, to listen to the fan speed of the two 120mm
fans, as the case gets closer and closer to the floor. If you hear the fan
speed change, then that means the 30mm gap is giving back-pressure or resistance
etc.

When there are multiple fans involved, you also have to ensure you've got
sufficient vent space on the case, so the fans aren't "starved". On one of
my cases, it meant removing some plastic trim pieces, so there would be a
larger intake vent. My big cooling fan "sounded like a vacuum cleaner",
until I opened up more vents.

You could always build a "stylish framework", to elevate the computer case,
and take the place of the function of the wheels. If the stand isn't too
wobbly, the case should be OK.

Even a "custom computer table", with a hole in the table that matches where
the lower vent is located, would work. (The advantage there, is minimal changes
to the case itself, leave the wheels on.) It all depends on your empirical testing,
as to whether that is necessary or not.

Paul

Ian R

unread,
Aug 8, 2011, 5:11:40 AM8/8/11
to

Hi Paul

Thanks very much for your detailed reply.

I really appreciate your suggestions and helpful advice. Great ideas!

If I find I get too much back pressure with the tower on the floor then I
can easily create a small plinth with an opening at the top.

I've got a good supply of fresh air being drawn in to the case from two
120mm fans at the front which draws air through the drive bays + a crossflow
fan specifically for the Stacker case. This draws in air from the right side
of the case and blows a nice stream of air across the full width of the
motherboard. See an example here:
http://www2.hardwarezone.com.my/img/data/articles/2004/1120/installed_air-direction.jpg

Thanks again.

Cheers

Ian I^)


0 new messages