info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Driver Motherboard Ms7616 Ver 1
5 views
Skip to first unread message
Саня Ершов
Dec 3, 2023, 10:05:47 PM12/3/23
to
If you could not find the exact driver for your hardware device or you aren't sure which driver is right one, we have a program that will detect your hardware specifications and identify the correct driver for your needs. Please click here to download.
Driver Motherboard Ms7616 Ver 1
DOWNLOAD https://urluss.com/2wHWPm
remove any hard drives ata cables at motherboard, reboot and F2 (usually on laptops) or del on other computers, some are F10 or Escchange uefi boot to cms startup and remove secure boot after this you an even change boot sequence
Once you buy your TPM module, install it on the motherboard. You need to enable the TPM module from the UEFI firmware menu. Most of the TPM modules, if compatible, work right out of the box without any installation. They do need a system restart though.
In virtualization, guest operating systems can use hardware that is not specifically made for virtualization. Higher performance hardware such as graphics cards use DMA to access memory directly; in a virtual environment, all memory addresses are re-mapped by the virtual machine software, which causes DMA devices to fail. The IOMMU handles this re-mapping, allowing the native device drivers to be used in a guest operating system.
In plain language, it helps in using hardware resources in VM, as good as it had direct hardware full access., thus you use the original driver and code in VM too and are able to get the best performance.
Thank you for your quick reply, and again thank you for your devotion to customers. what I did is as follows: I connected a usb keyboard only- no mouse- and a floppy disk drive. in addition to the cpu, RAM, and VGA adapter and power supply. I had the bios ROM and the bios update utility on the Floppy disk, and added a command line to the autoexec.bat file to run the update utility and load the bios ROM automatically- as the screen is completely black. and switched on the poer. it took approx. 2 minutes utill finished. then, there was a reboot, and guess what?!! There is a bios post screen on the monitor! the motherboard was bios-flashed successfully!!!! and everything went fine after that. thanks again and again.
I have an i7 2600k CPU and it was purchased brand new and the motherboard that I first tried installing it on was a MSI P67A-GD55 (B3) and I had all the DIMM slots full with DDR3 1600 memory. When I started the system for the first time all it did was come on and go off a second or so later then it came back on again. It did that continually so I started pulling memory sticks out so that it only had a single stick. It came up to the post screen right away. I added a second stick so it would run in dual channel mode, turned on the computer and it started right up. Then I added a third stick and tried it that way and as expected it wasn't runing in dual channel mode any longer. I then installed the final stick and turned it on, it went right back to the on, off looping issue. I pulled every stick except for the last one I put in. I turned the system back on and it went to looping, I tried every stick of RAM in that DIMM slot and all of them went right to the looping deal again. I figured that it was just a bad DIMM slot so I RMA'd the board. The company wouldn't accept it when it got to them say that several pins in the cpu socket were bent and twisted beyond repair so they sent it back to me. I looked at and couldn't see anything wrong with it. So I figured I was just going to at the cost of that board. I ordered another board this time a MSI Z68A-GD80 and was extremly careful installing the CPU on the board. I installed all of the memory and it fired right up to the post screen and it was running at the default settings so I made a few changes in the BIOS and it continued to work just fine so I went ahead and installed Windows 7 Ultimate 64 bit version. That went off without a hitch. I shut it down for the night as it was pretty late to do anything more with it.
I had gotten pretty well ticked off with the MSI boards and went and bought an ASUS MAXIMUS IV EXTREME-Z board and an i5 2500k to run on it if the i7 2600k on the ASUS board went and flaked out like the two MSI boards did. I got to thinking do I really want to chance messing up a very expensive motherboard by even trying the i7 2600k on it.
I've tried running the memory at the default settings which had it running at 1333 (no operating system installed) instead of 1600 and the voltage was running at 1.5 in fact it is the recomended voltage for m particular RAM which is Corsair Vengeance Blue 16 GB PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit for Intel and AMD Platforms CMZ16GX3M4A1600C9B. I would surmise that it's a problem with the MSI motherboard and that installing it on the ASUS board shouldn't be an issue? Both of the MSI boards had the problem right out of the box being that this was a new build and everything at first start up were all default settings. When I have just the two sticks running I can turn on the XMP profile without any issues, in fact I'm using the Z68 based system right now to write this. No one on the MSI site had a clue to what the problem might be which is why I came here.
Look at the rated Voltage of the RAM and the rated VOLTAGE and Speed of the Motherobard. Some motherboards do not support RAM with a voltage higher than 1.5v. I looked at some of the specs on a few processors and some Motherboards may support RAM at 1600 at 1.65v.
RAM is dependent on the specific motherboard model. What is your model? Sometimes the the specific number and size of Chips and whether RAM is doublesided or not is also very specific for the Motherboard Model Number.
I am having the same issue described by the original poster. I have repeated this error on multiple motherboards with multiple batches of ram, not all from the same manufacturer. I've chatted with the Intel guys and at first told me that my memory was not running at the spec'd frequency for the i7 920. I had been running 12Gb of 1600Mhz memory for about 2.5yrs with no issues. Recently I went to upgrade this to the max supported for my motherboard which is 24Gb. This is where I started getting the boot looping. Up to 12gb of memory the pc boots up fine, any more than that and its all boot loop. After replacing the 1600Mhz memory with 1066Mhz memory (spec'd by intel) it resulted in the same issue. Intel is now sending me a new processor to see if this corrects the issue. To my knowledge I have a first generation i7 so hopefully this is just an issue with the memory controller on the first generations. I'll update after the new chip is installed. I should also add that the memory than I now have (1066Mhz) has been verified as compliant by the motherboard manufacturer as well.
edit 2.
I looked at the Medion driver downloads
I entered my medion # Art-NR 100113596
It came up on the top of the list with this:
Bios Update MS 7502
Bios UpdateVersion:1.0R System:Release date:12.07.2011
Previous downloads:5348 (1.28 MBytes, ca. 3 min / ISDN)
This option requires basic OS understanding.
Select Your Operating System, download zipped files, and then proceed to
manually install them.
Recommended if Medion Ms 7616 is the only driver on your PC you wish to update.
eebf2c3492
Driver Motherboard Ms7616 Ver 1
DOWNLOAD https://urluss.com/2wHWPm
remove any hard drives ata cables at motherboard, reboot and F2 (usually on laptops) or del on other computers, some are F10 or Escchange uefi boot to cms startup and remove secure boot after this you an even change boot sequence
Once you buy your TPM module, install it on the motherboard. You need to enable the TPM module from the UEFI firmware menu. Most of the TPM modules, if compatible, work right out of the box without any installation. They do need a system restart though.
In virtualization, guest operating systems can use hardware that is not specifically made for virtualization. Higher performance hardware such as graphics cards use DMA to access memory directly; in a virtual environment, all memory addresses are re-mapped by the virtual machine software, which causes DMA devices to fail. The IOMMU handles this re-mapping, allowing the native device drivers to be used in a guest operating system.
In plain language, it helps in using hardware resources in VM, as good as it had direct hardware full access., thus you use the original driver and code in VM too and are able to get the best performance.
Thank you for your quick reply, and again thank you for your devotion to customers. what I did is as follows: I connected a usb keyboard only- no mouse- and a floppy disk drive. in addition to the cpu, RAM, and VGA adapter and power supply. I had the bios ROM and the bios update utility on the Floppy disk, and added a command line to the autoexec.bat file to run the update utility and load the bios ROM automatically- as the screen is completely black. and switched on the poer. it took approx. 2 minutes utill finished. then, there was a reboot, and guess what?!! There is a bios post screen on the monitor! the motherboard was bios-flashed successfully!!!! and everything went fine after that. thanks again and again.
I have an i7 2600k CPU and it was purchased brand new and the motherboard that I first tried installing it on was a MSI P67A-GD55 (B3) and I had all the DIMM slots full with DDR3 1600 memory. When I started the system for the first time all it did was come on and go off a second or so later then it came back on again. It did that continually so I started pulling memory sticks out so that it only had a single stick. It came up to the post screen right away. I added a second stick so it would run in dual channel mode, turned on the computer and it started right up. Then I added a third stick and tried it that way and as expected it wasn't runing in dual channel mode any longer. I then installed the final stick and turned it on, it went right back to the on, off looping issue. I pulled every stick except for the last one I put in. I turned the system back on and it went to looping, I tried every stick of RAM in that DIMM slot and all of them went right to the looping deal again. I figured that it was just a bad DIMM slot so I RMA'd the board. The company wouldn't accept it when it got to them say that several pins in the cpu socket were bent and twisted beyond repair so they sent it back to me. I looked at and couldn't see anything wrong with it. So I figured I was just going to at the cost of that board. I ordered another board this time a MSI Z68A-GD80 and was extremly careful installing the CPU on the board. I installed all of the memory and it fired right up to the post screen and it was running at the default settings so I made a few changes in the BIOS and it continued to work just fine so I went ahead and installed Windows 7 Ultimate 64 bit version. That went off without a hitch. I shut it down for the night as it was pretty late to do anything more with it.
I had gotten pretty well ticked off with the MSI boards and went and bought an ASUS MAXIMUS IV EXTREME-Z board and an i5 2500k to run on it if the i7 2600k on the ASUS board went and flaked out like the two MSI boards did. I got to thinking do I really want to chance messing up a very expensive motherboard by even trying the i7 2600k on it.
I've tried running the memory at the default settings which had it running at 1333 (no operating system installed) instead of 1600 and the voltage was running at 1.5 in fact it is the recomended voltage for m particular RAM which is Corsair Vengeance Blue 16 GB PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit for Intel and AMD Platforms CMZ16GX3M4A1600C9B. I would surmise that it's a problem with the MSI motherboard and that installing it on the ASUS board shouldn't be an issue? Both of the MSI boards had the problem right out of the box being that this was a new build and everything at first start up were all default settings. When I have just the two sticks running I can turn on the XMP profile without any issues, in fact I'm using the Z68 based system right now to write this. No one on the MSI site had a clue to what the problem might be which is why I came here.
Look at the rated Voltage of the RAM and the rated VOLTAGE and Speed of the Motherobard. Some motherboards do not support RAM with a voltage higher than 1.5v. I looked at some of the specs on a few processors and some Motherboards may support RAM at 1600 at 1.65v.
RAM is dependent on the specific motherboard model. What is your model? Sometimes the the specific number and size of Chips and whether RAM is doublesided or not is also very specific for the Motherboard Model Number.
I am having the same issue described by the original poster. I have repeated this error on multiple motherboards with multiple batches of ram, not all from the same manufacturer. I've chatted with the Intel guys and at first told me that my memory was not running at the spec'd frequency for the i7 920. I had been running 12Gb of 1600Mhz memory for about 2.5yrs with no issues. Recently I went to upgrade this to the max supported for my motherboard which is 24Gb. This is where I started getting the boot looping. Up to 12gb of memory the pc boots up fine, any more than that and its all boot loop. After replacing the 1600Mhz memory with 1066Mhz memory (spec'd by intel) it resulted in the same issue. Intel is now sending me a new processor to see if this corrects the issue. To my knowledge I have a first generation i7 so hopefully this is just an issue with the memory controller on the first generations. I'll update after the new chip is installed. I should also add that the memory than I now have (1066Mhz) has been verified as compliant by the motherboard manufacturer as well.
edit 2.
I looked at the Medion driver downloads
I entered my medion # Art-NR 100113596
It came up on the top of the list with this:
Bios Update MS 7502
Bios UpdateVersion:1.0R System:Release date:12.07.2011
Previous downloads:5348 (1.28 MBytes, ca. 3 min / ISDN)
This option requires basic OS understanding.
Select Your Operating System, download zipped files, and then proceed to
manually install them.
Recommended if Medion Ms 7616 is the only driver on your PC you wish to update.
eebf2c3492
0 new messages