info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Configuration Tool Swe330a
7 views
Skip to first unread message
Karly Spalinger
Dec 9, 2023, 11:36:32 PM12/9/23
to
How to Use Configuration Tool SWE330A for Siemens Fire Alarm Systems
If you are looking for a convenient and easy way to program and configure Siemens fire alarm systems, you might want to check out the configuration tool SWE330A. This tool is a software application that allows you to connect to the control and display panels of the FC330A series via a LON-Bus interface. You can use it to set up parameters, assign addresses, test devices, and monitor the system status.
configuration tool swe330a
DOWNLOAD https://vbooc.com/2wJvlr
In this article, we will show you how to install and use the configuration tool SWE330A for Siemens fire alarm systems. We will also explain some of the features and benefits of this tool and how it can help you save time and money.
How to Install Configuration Tool SWE330A
To install the configuration tool SWE330A, you will need a PC with Windows XP or higher, a LON interface card (such as SST PCLTA-21), and a LON cable. You will also need to download the configuration tool SWE330A from the Siemens website or from one of the links below[^1^] [^3^]. Follow these steps to install the tool:
Run the setup.exe file and follow the instructions on the screen.
Select the language and the destination folder for the installation.
Choose whether you want to create a desktop shortcut or not.
Click Finish to complete the installation.
Once you have installed the tool, you can launch it from the Start menu or from the desktop shortcut. You will see a window like this:
This is the main window of the configuration tool SWE330A. Here you can access different functions and menus, such as File, Edit, View, Tools, Help, etc. You can also see the status bar at the bottom, which shows information such as connection status, device count, error messages, etc.
How to Use Configuration Tool SWE330A
To use the configuration tool SWE330A, you will need to connect your PC to the control and display panel of the fire alarm system via the LON-Bus interface. You will also need to set up some parameters in the tool before you can start programming and configuring. Here are some of the basic steps to use the tool:
Connect your PC to the control and display panel using a LON cable. Make sure that both devices are powered on and that there are no other devices connected to the same LON-Bus.
Launch the configuration tool SWE330A and click on Tools > Options. Here you can set up some preferences for the tool, such as language, communication port, baud rate, etc.
Click on File > New Project or File > Open Project to create or open a project file. A project file contains all the settings and data for a specific fire alarm system. You can save, load, edit, or delete project files as needed.
Click on Tools > Connect or press F9 to establish a connection between your PC and the control and display panel. You will see a message saying "Connected" in the status bar if successful.
Click on Tools > Read All Devices or press F10 to scan all the devices connected to the fire alarm system. You will see a list of devices with their addresses, types, names, statuses, etc. in the main window. You can also use filters and sorting options to find specific devices.
Select a device from the list and click on Edit > Device Parameters or double-click on it to open its parameter window. Here you can change various settings for each device, such as address, name, group, sensitivity, etc.
Click on File > Save Project or press Ctrl+S to save your changes to the project file. You can also click on Tools > Write All Devices or press F11 to send your changes to the control and display panel.
Click on Tools > Disconnect or press F12 to terminate the
d8cbe59d7d
If you are looking for a convenient and easy way to program and configure Siemens fire alarm systems, you might want to check out the configuration tool SWE330A. This tool is a software application that allows you to connect to the control and display panels of the FC330A series via a LON-Bus interface. You can use it to set up parameters, assign addresses, test devices, and monitor the system status.
configuration tool swe330a
DOWNLOAD https://vbooc.com/2wJvlr
In this article, we will show you how to install and use the configuration tool SWE330A for Siemens fire alarm systems. We will also explain some of the features and benefits of this tool and how it can help you save time and money.
How to Install Configuration Tool SWE330A
To install the configuration tool SWE330A, you will need a PC with Windows XP or higher, a LON interface card (such as SST PCLTA-21), and a LON cable. You will also need to download the configuration tool SWE330A from the Siemens website or from one of the links below[^1^] [^3^]. Follow these steps to install the tool:
Run the setup.exe file and follow the instructions on the screen.
Select the language and the destination folder for the installation.
Choose whether you want to create a desktop shortcut or not.
Click Finish to complete the installation.
Once you have installed the tool, you can launch it from the Start menu or from the desktop shortcut. You will see a window like this:
This is the main window of the configuration tool SWE330A. Here you can access different functions and menus, such as File, Edit, View, Tools, Help, etc. You can also see the status bar at the bottom, which shows information such as connection status, device count, error messages, etc.
How to Use Configuration Tool SWE330A
To use the configuration tool SWE330A, you will need to connect your PC to the control and display panel of the fire alarm system via the LON-Bus interface. You will also need to set up some parameters in the tool before you can start programming and configuring. Here are some of the basic steps to use the tool:
Connect your PC to the control and display panel using a LON cable. Make sure that both devices are powered on and that there are no other devices connected to the same LON-Bus.
Launch the configuration tool SWE330A and click on Tools > Options. Here you can set up some preferences for the tool, such as language, communication port, baud rate, etc.
Click on File > New Project or File > Open Project to create or open a project file. A project file contains all the settings and data for a specific fire alarm system. You can save, load, edit, or delete project files as needed.
Click on Tools > Connect or press F9 to establish a connection between your PC and the control and display panel. You will see a message saying "Connected" in the status bar if successful.
Click on Tools > Read All Devices or press F10 to scan all the devices connected to the fire alarm system. You will see a list of devices with their addresses, types, names, statuses, etc. in the main window. You can also use filters and sorting options to find specific devices.
Select a device from the list and click on Edit > Device Parameters or double-click on it to open its parameter window. Here you can change various settings for each device, such as address, name, group, sensitivity, etc.
Click on File > Save Project or press Ctrl+S to save your changes to the project file. You can also click on Tools > Write All Devices or press F11 to send your changes to the control and display panel.
Click on Tools > Disconnect or press F12 to terminate the
d8cbe59d7d
0 new messages