Nero Problem?
Trevor Norris
only happened recently and on both burners so I think the problem is
software. My pc is running windows XP sp3. The processor is AMD 2.8ghz and
there is 1gb of ram. I have two burners: a BenQ DVD DD DW1640 (firmware
version BSRB) and a BTW Combo IDE5232CO (firmware version K049). I have
been using Nero 6 for over two years with no problems. I updated Nero as
part of my troubleshooting to 6.6.1.15.
I have tried different media, reinstalling the software, I used the Nero
clean tool to fully remove the uninstalled software before reloading.
What follows is the contents of the Nero log file. I am getting similar log
files for both burners so am only including the most recent.
Can someone tell me whats wrong?
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=16384 bytes, created
02/10/1995 08:50:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <COMBO IDE5232CO> Version: K049 - HA 1 TA 1 -
6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <BENQ DVD DD DW1640 >Version: BSRB - HA 1 TA 0 -
6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : HDS728040PLAT20 atapi Port 0 ID 1
DMA: On
CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 1 ID 0
DMA: On
CdRomPeripheral : COMBO IDE5232CO atapi Port 1 ID 1
DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1640 E: CDRom0
COMBO IDE5232CO F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047728kB)
Free physical memory: 316MB (324108kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.2.2009
CD-ROM (ISO)
00:22:03 #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
00:22:03 #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
00:22:04 #3 Text 0 File Burncd.cpp, Line 3014
COMBO IDE5232CO
Super Link activated
00:22:04 #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
00:22:04 #5 Text 0 File Burncd.cpp, Line 3316
Turn on Track-At-Once, using CD-R/RW media
00:22:04 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 315372 ( 70:06.72)
00:22:04 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
00:22:04 #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: COMBO IDE5232CO;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B
4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3:
00 80 80 (invalid)
00:22:04 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:22:04 #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 315373 (315373) = #315373/70:4.73
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
315371 blocks [COMBO IDE5232CO ]
--------------------------------------------------------------
00:22:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [COMBO IDE5232CO] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
646191104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
315373 | lead-out | 1 | 0x41 | 0x00
00:22:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1081
Removed 2 run-out blocks from end of track 1. Length: 315373 -> 315371.
00:22:04 #13 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
00:22:04 #14 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
00:22:04 #15 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
00:22:04 #16 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
00:22:04 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 52x (7,800 KB/s)
00:22:04 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0
00:22:04 #19 Text 0 File Mmc.cpp, Line 22143
Set BUFE: Super Link -> ON
00:24:03 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 E7 40 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x08001040: Len x10000
0x3A 32 36 37 32 35 37 2E 31 32 31 2F 31 31 31 2F
0x33 39 32 32 31 2F 25 26 22 22 22 1E 25 1B 1D 1D
0x17 1B 17 17 17 17 17 23 26 17 17 14 13 17 15 17
00:24:03 #21 CDR -1135 File Writer.cpp, Line 281
Write error
F: COMBO IDE5232CO
00:24:03 #22 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
F: COMBO IDE5232CO
00:24:03 #23 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack
00:24:04 #24 Text 0 File Mmc.cpp, Line 16939
<COMBO IDE5232CO > start Close Session
00:25:30 #25 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 52x (7,800 KB/s)
00:25:30 #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:25:32 #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
00:25:32 #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
>
> I am having problems burning CD's and DVD's on my burners. This problem has
> only happened recently and on both burners so I think the problem is
> software. My pc is running windows XP sp3. The processor is AMD 2.8ghz and
> there is 1gb of ram. I have two burners: a BenQ DVD DD DW1640 (firmware
> version BSRB) and a BTW Combo IDE5232CO (firmware version K049).
Are the firmwares the latest?
> I have
> been using Nero 6 for over two years with no problems. I updated Nero as
> part of my troubleshooting to 6.6.1.15.
>
> I have tried different media,
What brands?
> reinstalling the software, I used the Nero
> clean tool to fully remove the uninstalled software before reloading.
>
> What follows is the contents of the Nero log file. I am getting similar log
> files for both burners so am only including the most recent.
>
> Can someone tell me whats wrong?
>
> Nero Version: 6.6.1.15
> === Scsi-Device-Map ===
> DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0
> DMA: On
> DiskPeripheral : HDS728040PLAT20 atapi Port 0 ID 1
> DMA: On
> CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 1 ID 0
> DMA: On
> CdRomPeripheral : COMBO IDE5232CO atapi Port 1 ID 1
> DMA: On
DMA is on.
> CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
This is not a quality brand.
>.
> Burn process started at 52x (7,800 KB/s)
Try lower the burn speed to like 24x.
> CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
>
> Sense Key: 0x03 (KEY_MEDIUM_ERROR)
> Sense Code: 0x0C
> Sense Qual: 0x00
According to these the above errors point to DMA, disc and drive in that
order. Since the DMA is on, the most likely suspect is the disc. But
then you said you tried various brands. Have you tried Verbatim or Taiyo
Yuden?
FAQ: How to interpret your burning error code
http://forum.digital-digest.com/showthread.php?t=57052
List of ATAPI Error codes
http://www.cdr-zone.com/articles/atapi_error_codes_page_1.html
>.
> Existing drivers:
Nothing listed here?
>.
Trevor Norris
"smh" <nos...@nospam.org> wrote in message
news:49937FF3...@nospam.org...
>. -------------------------- ------------
> Mike Richter, were you born with
> "Scam Artist" emblazoned on your face?
> --------------------------------------
>
> Trevor Norris wrote:
>>
>> I am having problems burning CD's and DVD's on my burners. This problem
>> has
>> only happened recently and on both burners so I think the problem is
>> software. My pc is running windows XP sp3. The processor is AMD 2.8ghz
>> and
>> there is 1gb of ram. I have two burners: a BenQ DVD DD DW1640 (firmware
>> version BSRB) and a BTW Combo IDE5232CO (firmware version K049).
>
> Are the firmwares the latest?
Yes Latest firmware
>
>> I have
>> been using Nero 6 for over two years with no problems. I updated Nero as
>> part of my troubleshooting to 6.6.1.15.
>>
>> I have tried different media,
>
> What brands?
Verbatim, Packard Bell, Intenso, PC Line, I tried a variety
>
>> reinstalling the software, I used the Nero
>> clean tool to fully remove the uninstalled software before reloading.
>>
>> What follows is the contents of the Nero log file. I am getting similar
>> log
>> files for both burners so am only including the most recent.
>>
>> Can someone tell me whats wrong?
>>
>
>> Nero Version: 6.6.1.15
>
>> === Scsi-Device-Map ===
>> DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0
>> DMA: On
>> DiskPeripheral : HDS728040PLAT20 atapi Port 0 ID 1
>> DMA: On
>> CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 1 ID 0
>> DMA: On
>> CdRomPeripheral : COMBO IDE5232CO atapi Port 1 ID 1
>> DMA: On
>
> DMA is on.
>
>> CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
>
> This is not a quality brand.
>
>>.
>> Burn process started at 52x (7,800 KB/s)
>
> Try lower the burn speed to like 24x.
Tried lowering the burn speed to no avail.
>
>> CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
>>
>> Sense Key: 0x03 (KEY_MEDIUM_ERROR)
>> Sense Code: 0x0C
>> Sense Qual: 0x00
>
> According to these the above errors point to DMA, disc and drive in that
> order. Since the DMA is on, the most likely suspect is the disc. But
> then you said you tried various brands. Have you tried Verbatim or Taiyo
> Yuden?
>
> FAQ: How to interpret your burning error code
> http://forum.digital-digest.com/showthread.php?t=57052
>
> List of ATAPI Error codes
> http://www.cdr-zone.com/articles/atapi_error_codes_page_1.html
>
>>.
>> Existing drivers:
>
> Nothing listed here?
cdrom.sys, imapi.sys, redbook.sys & storprop.dll for both drives
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
Your reply indicates everything should be ok.
> >>.
> >> Existing drivers:
>
> cdrom.sys, imapi.sys, redbook.sys & storprop.dll for both drives
cdrom.sys and redbook.sys shouldn't be listed. Run Nero InfoTool,
Drivers tab and post back what it says about the two files. Are they
Microsoft? (Check also ASPI tab and see if aspi is installed properly.)
And don't know why STORPROP.DLL is listed. Does InfoTool list it?
Disable IMAPI:
Control Panel, Administrative Tools, Services, and double-click "IMAPI
CD Burning", click Stop, then set "Startup type" as "Disabled".
What drivers did you install after you update to SP3?
Trevor Norris
Cdrom SCSI Cdrom Driver version 5.1.2600.5512(xpsp.080413-2108)
redbook Redbook Audio Filter Driver version
5.1.2600.5512(xpsp.080413-2108)
When I click on ASPI I see two sections: ASPI Installation shows System
ASPI. The File listed in the bottom section is wnaspi32.dll and I have a
yellow warning at the bottom of the screen saying ASPI files are missing. I
can select Nero Aspi from the top menu and this warning goes green saying
Aspi is installed and working properly. If i go out of InfoTool and come
back in the file shown is the original with the warning. I cannot get the
Nero ASPI to default.
> And don't know why STORPROP.DLL is listed. Does InfoTool list it?
No its not listed in InfoTool
>
> Disable IMAPI:
> Control Panel, Administrative Tools, Services, and double-click "IMAPI
> CD Burning", click Stop, then set "Startup type" as "Disabled".
Done - IMAPI is now disabled.
>
> What drivers did you install after you update to SP3?
I didn't install any drivers after SP3. So I guess microsoft.
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
> "smh" wrote:
> > Trevor Norris wrote:
> >> >>
> >> >> I have
> >> >> been using Nero 6 for over two years with no problems. I updated Nero
> >> >> as
> >> >> part of my troubleshooting to 6.6.1.15.
> >>
> >> >>.
> >> >> Existing drivers:
> >>
> >> cdrom.sys, imapi.sys, redbook.sys & storprop.dll for both drives
> >
> > cdrom.sys and redbook.sys shouldn't be listed. Run Nero InfoTool,
> > Drivers tab and post back what it says about the two files. Are they
> > Microsoft? (Check also ASPI tab and see if aspi is installed properly.)
> >
> Cdrom.sys and redbook.sys are microsoft.
>
> Cdrom SCSI Cdrom Driver version 5.1.2600.5512(xpsp.080413-2108)
> redbook Redbook Audio Filter Driver version
> 5.1.2600.5512(xpsp.080413-2108)
Those are sp3 files. Beginning to think that Nero 6.6.1.15 may not be
compatible with sp3.
>
> When I click on ASPI I see two sections: ASPI Installation shows System
> ASPI. The File listed in the bottom section is wnaspi32.dll and I have a
> yellow warning at the bottom of the screen saying ASPI files are missing.
> I can select Nero Aspi from the top menu and this warning goes green saying
> Aspi is installed and working properly. If i go out of InfoTool and come
> back in the file shown is the original with the warning. I cannot get the
> Nero ASPI to default.
System aspi error means you cannot use other burn softwares that depends
on aspi. Nero uses its own aspi, the Nero aspi. No need to be concerned
about. Wanted to know if you have some oddball aspi installed.
>
> > And don't know why STORPROP.DLL is listed. Does InfoTool list it?
>
> No its not listed in InfoTool
It's also not listed on mine. But why listed in the Existing drivers
section?!
> > Disable IMAPI:
> > Control Panel, Administrative Tools, Services, and double-click "IMAPI
> > CD Burning", click Stop, then set "Startup type" as "Disabled".
>
> Done - IMAPI is now disabled.
> >
> > What drivers did you install after you update to SP3?
>
> I didn't install any drivers after SP3. So I guess microsoft.
At this point the only thing I can (lamely) suggest is
uninstall/reinstall Nero using clean tool and see if disabling imapi has
any effect. If you still get the error with cdrom.sys and redbook.sys
listed in the Existing drivers section - the drivers Nero supposedly
don't like or conflict. I can only conclude that Nero 6.6.1.15 is not
compatible with sp3.
Or, if you are willing to go through the trouble, try the latest Nero
trial version - which should be sp3 compatible - and see if the problem
disappears.
(I did not update to sp3 because I read some problems. Going to track
down what the problems are and see if any software compatibility is one
of them.)
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
>
Try these:
1. Uninstall ALL burn softwares and reboot.
2. Start > Run > type in Regedt32 and Enter.
3. Go to the following registry locations and delete the key values for
UPPERFILTERS and LOWERFILTERS
(Right click the individual keys and select Delete)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
4. Exit Regedt32 and reboot.
5. Install Nero 6.
Trevor Norris
mode and they burned successfully. So at last perhaps some progress. I was
able to close out the discs with no problems. Not sure what caused it to
work. They are still failing on large amouts of data. I did have one
failure on a small data file, but because of the multi session (I think) I
was able to delete the failure and continue with the disk.
I'm still not happy.
I will try the advice on the latest post dated 13/02/09 at 23:15 and report
back.
Thanks for the help.
"smh" <nos...@nospam.org> wrote in message
news:4994C99D...@nospam.org...
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
>
> I have tried burning small amounts of data to both burners in multisession
> mode and they burned successfully.
Wonder if DMA is truly on. Uninstall the drives in [Control Panel,
Device Manager] by right-click the drive and choose Uninstall. Reboot to
let Windows reinstall the drives. Check the DMA status by [Device
Manager, IDE ATA/ATAPI controllers]. Double-click the channel - most
likely the second Primary IDE Channel - and click Advanced Settings tab.
Current Transfer Mode should be DMA.
>
> So at last perhaps some progress. I was
> able to close out the discs with no problems. Not sure what caused it to
> work. They are still failing on large amouts of data. I did have one
> failure on a small data file, but because of the multi session (I think) I
> was able to delete the failure and continue with the disk.
>
> I'm still not happy.
>
> I will try the advice on the latest post dated 13/02/09 at 23:15 and report
> back.
>
> Thanks for the help.
>
>
Trevor Norris
Done the uninstall, run the nero cleaner tool.
Opened regedit. could not find the entries above under the key mentioned.
But I did find them elsewhere - see below.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\CdRomBENQ_DVD_DD_DW1640______________________BSLB____\4a39354231553035334633353739323731355050]
"DeviceDesc"="CD-ROM Drive"
"LocationInformation"="0"
"Capabilities"=dword:00000010
"UINumber"=dword:00000000
"HardwareID"=hex(7):49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,42,\
00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,5f,00,44,00,\
57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,42,00,53,00,4c,00,42,00,5f,00,5f,00,5f,00,5f,00,00,00,49,00,44,\
00,45,00,5c,00,42,00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,\
44,00,5f,00,44,00,57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,42,00,53,00,4c,00,42,00,5f,00,5f,00,5f,00,5f,\
00,00,00,49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,42,00,45,00,\
4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,5f,00,44,00,57,00,31,\
00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,00,00,42,00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,\
5f,00,44,00,57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,42,00,53,00,4c,00,42,00,5f,00,5f,00,5f,00,5f,00,00,\
00,47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,00,00
"CompatibleIDs"=hex(7):47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,\
00,00
"Service"="cdrom"
"ConfigFlags"=dword:00000000
"ClassGUID"="{4D36E965-E325-11CE-BFC1-08002BE10318}"
"Class"="CDROM"
"Driver"="{4D36E965-E325-11CE-BFC1-08002BE10318}\\0000"
"Mfg"="(Standard CD-ROM drives)"
"UpperFilters"=hex(7):72,00,65,00,64,00,62,00,6f,00,6f,00,6b,00,00,00,00,00
"LowerFilters"=hex(7):69,00,6d,00,61,00,70,00,69,00,00,00,00,00
"FriendlyName"="BENQ DVD DD DW1640"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\CdRomBENQ_DVD_DD_DW1640______________________BSRB____\4a39354231553035334633353739323731355050]
"DeviceDesc"="CD-ROM Drive"
"LocationInformation"="0"
"Capabilities"=dword:00000010
"UINumber"=dword:00000000
"HardwareID"=hex(7):49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,42,\
00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,5f,00,44,00,\
57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,42,00,53,00,52,00,42,00,5f,00,5f,00,5f,00,5f,00,00,00,49,00,44,\
00,45,00,5c,00,42,00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,\
44,00,5f,00,44,00,57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,42,00,53,00,52,00,42,00,5f,00,5f,00,5f,00,5f,\
00,00,00,49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,42,00,45,00,\
4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,5f,00,44,00,57,00,31,\
00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,00,00,42,00,45,00,4e,00,51,00,5f,00,44,00,56,00,44,00,5f,00,44,00,44,00,\
5f,00,44,00,57,00,31,00,36,00,34,00,30,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,42,00,53,00,52,00,42,00,5f,00,5f,00,5f,00,5f,00,00,\
00,47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,00,00
"CompatibleIDs"=hex(7):47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,\
00,00
"ClassGUID"="{4D36E965-E325-11CE-BFC1-08002BE10318}"
"Service"="cdrom"
"ConfigFlags"=dword:00000000
"Driver"="{4D36E965-E325-11CE-BFC1-08002BE10318}\\0003"
"Class"="CDROM"
"Mfg"="(Standard CD-ROM drives)"
"UpperFilters"=hex(7):72,00,65,00,64,00,62,00,6f,00,6f,00,6b,00,00,00,00,00
"LowerFilters"=hex(7):69,00,6d,00,61,00,70,00,69,00,00,00,00,00
"FriendlyName"="BENQ DVD DD DW1640"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\CdRomCOMBO_IDE5232CO_________________________K036____\5&6a6be80&0&0.1.0]
"DeviceDesc"="CD-ROM Drive"
"LocationInformation"="1"
"Capabilities"=dword:00000000
"UINumber"=dword:00000001
"HardwareID"=hex(7):49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,43,\
00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,33,00,32,00,\
43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,4b,00,30,00,33,00,36,00,5f,00,5f,00,5f,00,5f,00,00,00,49,00,44,\
00,45,00,5c,00,43,00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,\
32,00,33,00,32,00,43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,4b,00,30,00,33,00,36,00,5f,00,5f,00,5f,00,5f,\
00,00,00,49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,43,00,4f,00,\
4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,33,00,32,00,43,00,4f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,00,00,43,00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,\
33,00,32,00,43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,4b,00,30,00,33,00,36,00,5f,00,5f,00,5f,00,5f,00,00,\
00,47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,00,00
"CompatibleIDs"=hex(7):47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,\
00,00
"Service"="cdrom"
"ConfigFlags"=dword:00000000
"ClassGUID"="{4D36E965-E325-11CE-BFC1-08002BE10318}"
"Class"="CDROM"
"Driver"="{4D36E965-E325-11CE-BFC1-08002BE10318}\\0001"
"Mfg"="(Standard CD-ROM drives)"
"UpperFilters"=hex(7):72,00,65,00,64,00,62,00,6f,00,6f,00,6b,00,00,00,00,00
"LowerFilters"=hex(7):69,00,6d,00,61,00,70,00,69,00,00,00,00,00
"FriendlyName"="COMBO IDE5232CO"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\CdRomCOMBO_IDE5232CO_________________________K049____\5&6a6be80&0&0.1.0]
"DeviceDesc"="CD-ROM Drive"
"LocationInformation"="1"
"Capabilities"=dword:00000000
"UINumber"=dword:00000001
"HardwareID"=hex(7):49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,43,\
00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,33,00,32,00,\
43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,4b,00,30,00,34,00,39,00,5f,00,5f,00,5f,00,5f,00,00,00,49,00,44,\
00,45,00,5c,00,43,00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,\
32,00,33,00,32,00,43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,4b,00,30,00,34,00,39,00,5f,00,5f,00,5f,00,5f,\
00,00,00,49,00,44,00,45,00,5c,00,43,00,64,00,52,00,6f,00,6d,00,43,00,4f,00,\
4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,33,00,32,00,43,00,4f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,00,00,43,00,4f,00,4d,00,42,00,4f,00,5f,00,49,00,44,00,45,00,35,00,32,00,\
33,00,32,00,43,00,4f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,\
00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,5f,00,\
5f,00,5f,00,5f,00,5f,00,4b,00,30,00,34,00,39,00,5f,00,5f,00,5f,00,5f,00,00,\
00,47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,00,00
"CompatibleIDs"=hex(7):47,00,65,00,6e,00,43,00,64,00,52,00,6f,00,6d,00,00,00,\
00,00
"ClassGUID"="{4D36E965-E325-11CE-BFC1-08002BE10318}"
"Service"="cdrom"
"ConfigFlags"=dword:00000000
"Driver"="{4D36E965-E325-11CE-BFC1-08002BE10318}\\0002"
"Class"="CDROM"
"Mfg"="(Standard CD-ROM drives)"
"UpperFilters"=hex(7):72,00,65,00,64,00,62,00,6f,00,6f,00,6b,00,00,00,00,00
"LowerFilters"=hex(7):69,00,6d,00,61,00,70,00,69,00,00,00,00,00
"FriendlyName"="COMBO IDE5232CO"
Should I delete the entries here ?
I will not reinstall anything until I get a reply back.
Thanks for your help
Trevor Norris
>. --------------------------------------
> Mike Richter, were you born with
> "Scam Artist" emblazoned on your face?
> --------------------------------------
>
> Trevor Norris wrote:
>>
>> I have tried burning small amounts of data to both burners in
>> multisession
>> mode and they burned successfully.
>
> Wonder if DMA is truly on. Uninstall the drives in [Control Panel,
> Device Manager] by right-click the drive and choose Uninstall. Reboot to
> let Windows reinstall the drives. Check the DMA status by [Device
> Manager, IDE ATA/ATAPI controllers]. Double-click the channel - most
> likely the second Primary IDE Channel - and click Advanced Settings tab.
> Current Transfer Mode should be DMA.
>
Uninstalled both drives, rebooted, Current transfer mode drive 0 = Ultra DMA
Mode 2
Current transfer mode
drive 1 = Ultra DMA Mode 4
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
> "smh" wrote:
> > Trevor Norris wrote:
> >>
> >> I have tried burning small amounts of data to both burners in
> >> multisession
> >> mode and they burned successfully.
> >
> > Wonder if DMA is truly on. Uninstall the drives in [Control Panel,
> > Device Manager] by right-click the drive and choose Uninstall. Reboot to
> > let Windows reinstall the drives. Check the DMA status by [Device
> > Manager, IDE ATA/ATAPI controllers]. Double-click the channel - most
> > likely the second Primary IDE Channel - and click Advanced Settings tab.
> > Current Transfer Mode should be DMA.
> >
>
> Uninstalled both drives, rebooted, Current transfer mode drive 0 = Ultra DMA
> Mode 2
> Current transfer mode
> drive 1 = Ultra DMA Mode 4
DMA is indeed on. Wondered since you could burn small files, but not
large files.
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
> "smh" wrote:
> >
> > Try these:
> >
> > 1. Uninstall ALL burn softwares and reboot.
> > 2. Start > Run > type in Regedt32 and Enter.
> >
> > 3. Go to the following registry locations and delete the key values for
> > UPPERFILTERS and LOWERFILTERS
> > (Right click the individual keys and select Delete)
> >
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
> >
> > 4. Exit Regedt32 and reboot.
> > 5. Install Nero 6.
>
> Done the uninstall, run the nero cleaner tool.
>
> Opened regedit. could not find the entries above under the key mentioned.
That's as it should be as you don't have any burn softwares installed
yet. The idea is to clean out the entries.
>
> But I did find them elsewhere - see below.
> Should I delete the entries here ?
No.
> I will not reinstall anything until I get a reply back.
Go ahead and install Nero. Then go back to the upper/lower filters and
post back what's listed there.
>
> Thanks for your help
You are welcome.
>----------------
Trevor Norris
upper/lower filters in the key. See below
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}]
"Class"="CDROM"
@="DVD/CD-ROM drives"
"EnumPropPages32"="MmSys.Cpl,MediaPropPageProvider"
"Installer32"="storprop.dll,DvdClassInstaller"
"SilentInstall"="1"
"NoInstallClass"="1"
"TroubleShooter-0"="hcp://help/tshoot/tsdrive.htm"
"Icon"="-51"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0000]
"EnumPropPages32"="storprop.dll,DvdPropPageProvider"
"InfPath"="cdrom.inf"
"InfSection"="cdrom_install"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2535.0"
"MatchingDeviceId"="gencdrom"
"DriverDesc"="CD-ROM Drive"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0000\DigitalAudio]
"RegistryVersion"=dword:00000001
"NumberOfBuffers"=dword:00000008
"SectorsPerRead"=dword:00000010
"SectorsPerReadMask"=dword:ffffffff
"CDDASupported"=dword:00000001
"CDDAAccurate"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0001]
"EnumPropPages32"="storprop.dll,DvdPropPageProvider"
"InfPath"="cdrom.inf"
"InfSection"="cdrom_install"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2535.0"
"MatchingDeviceId"="gencdrom"
"DriverDesc"="CD-ROM Drive"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0001\DigitalAudio]
"RegistryVersion"=dword:00000001
"NumberOfBuffers"=dword:00000008
"SectorsPerRead"=dword:00000010
"SectorsPerReadMask"=dword:ffffffff
"CDDASupported"=dword:00000001
"CDDAAccurate"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0002]
"EnumPropPages32"="storprop.dll,DvdPropPageProvider"
"InfPath"="cdrom.inf"
"InfSection"="cdrom_install"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2535.0"
"MatchingDeviceId"="gencdrom"
"DriverDesc"="CD-ROM Drive"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0002\DigitalAudio]
"RegistryVersion"=dword:00000001
"NumberOfBuffers"=dword:00000008
"SectorsPerRead"=dword:00000010
"SectorsPerReadMask"=dword:ffffffff
"CDDASupported"=dword:00000001
"CDDAAccurate"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0003]
"EnumPropPages32"="storprop.dll,DvdPropPageProvider"
"InfPath"="cdrom.inf"
"InfSection"="cdrom_install"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2535.0"
"MatchingDeviceId"="gencdrom"
"DriverDesc"="CD-ROM Drive"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\0003\DigitalAudio]
"RegistryVersion"=dword:00000001
"NumberOfBuffers"=dword:00000008
"SectorsPerRead"=dword:00000010
"SectorsPerReadMask"=dword:ffffffff
"CDDASupported"=dword:00000001
"CDDAAccurate"=dword:00000001
smh
Was thinking that cdrom.sys and redbook.sys might be somehow listed for
LowerFilters.
Burn some large files to get errors and see if error log still lists
cdrom.sys and redbook.sys under "Existing drivers".
If so, uninstall Nero and try CDBurnerXP:
http://www.cdburnerxp.se/en/download
(The interface is similar to Nero and you shouldn't have much problems.)
>---------------------------------
Trevor Norris
I have been able to get my back-ups completed. If I try a small file in
multisession mode and let it fail. I can then send a large file to the
CD/DVD and it works. I am begining to think that the media is faulty but
only at the beginning of the disc.
I will download the software you suggest to see if this helps. I will also
buy some new discs.
Thanks again for your help
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
> "smh" wrote:
> >
> > Burn some large files to get errors and see if error log still lists
> > cdrom.sys and redbook.sys under "Existing drivers".
> >
> > If so, uninstall Nero and try CDBurnerXP:
> > http://www.cdburnerxp.se/en/download
> >
>
> I have been able to get my back-ups completed. If I try a small file in
> multisession mode and let it fail. I can then send a large file to the
> CD/DVD and it works. I am begining to think that the media is faulty but
> only at the beginning of the disc.
For the hell of it, if you have canned air, squirt some air to dislodge
loose dirt. And put in an audio cd and move the laser assembly back and
forth from track 1 to the last track. Hopefully this might help to
lubricate the beginning of track if the stickiness is the cause of the
trouble at the beginning of the disc.
>
> I will download the software you suggest to see if this helps.
At least that will eliminate either Nero or software as the cause.
> I will also buy some new discs.
Sounds like you won't be lacking xmas tree decorations. <g>
>
> Thanks again for your help
You are welcome. Let's hope you are going in the right direction to fix
the problem.
smh
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
Trevor Norris wrote:
>
> I have been able to get my back-ups completed. If I try a small file in
> multisession mode and let it fail. I can then send a large file to the
> CD/DVD and it works. I am begining to think that the media is faulty but
> only at the beginning of the disc.
>
> I will download the software you suggest to see if this helps. I will also
> buy some new discs.
>
> Thanks again for your help
If you are not making a headway, perhaps you might consider rebuilding
winxp.
XP's No-Reformat, Nondestructive Total-Rebuild Option
http://www.informationweek.com/windows/showArticle.jhtml?articleID=189400897
How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm