My question is: is there such a correspondence guide out there?
Mihran
-> I bought in Germany a multi-norm TV with a cable tuner with the C and S
-> channels. I brought it to the US when I returned from Germany which I
-> now use. The TV has a programmable channel layout and fine-tuning
-> capability, so I can tune in to the US cable channels here and store
-> them. But since the US cable channel frequencies do not correspond to
-> the European standard channels, everytime I have to add a new channel,
-> it is a time consuming task to search and fine-tune. The searching is
-> what takes most of the time and energy. It would be great if there was
-> some sort of guide which indicated what US cable channel corresponded to
-> the vicinity of what european C- or S-channel. Then I could simply go
-> there and fine-tune.
->
-> My question is: is there such a correspondence guide out there?
Not to my knowledge, although the frequency details of both the EU and
US channels are available separately (sorry, I don't have them).
However, I do not think that there is any way to avoid your problem; TV
channels in the US are 6MHz apart, whereas EU channels are 8 MHz apart,
thus fine-tuning will always be necessary.
You do not give the make of the TV; if there is a US version of the set,
it may be possible to convert it so it works correctly with the US
channels.
rgds
LAurence
Fine tuning is no problem. I just want to avoid a lot of search. Well,
anyway, by now I pretty much have most of the channels programmed
anyway. It only becomes a problem when the cable company adds a new
channel or when I move to a new place. I guess I won't worry about it
anytime soon.
>
> You do not give the make of the TV; if there is a US version of the set,
> it may be possible to convert it so it works correctly with the US
> channels.
My TV is Grundig. And it is multi-norm. It's surprising that for a TV
claiming to be multi-norm, it only has the European cable frequencies
and not the US ones. There must have been a SW switch to set the correct
norm. I can switch between norms very easily.
In any case, I wouldn't want to convert the TV to the US norm, because I
sometimes get video tapes recorded in Europe in PAL norm and I would
want to be able to watch them.
Thanks for the reply, though.
Mihran
>
> rgds
> LAurence
--
Mihran Tuceryan Phone: (317) 274-9736
Dept of Comp & Info Science, IUPUI Fax: (317) 274-9742
723 W. Michigan St, SL 280K mailto:tuce...@acm.org
Indianapolis, IN 46202-5132 http://www.cs.iupui.edu/~tuceryan
-> My TV is Grundig. And it is multi-norm. It's surprising that for a TV
-> claiming to be multi-norm, it only has the European cable frequencies
-> and not the US ones. There must have been a SW switch to set the correct
-> norm. I can switch between norms very easily.
This is usually the case; the makers assume that the set will be used in
its own country, and any "foreign" programming will come from videotape
or satellite.
-> In any case, I wouldn't want to convert the TV to the US norm, because I
-> sometimes get video tapes recorded in Europe in PAL norm and I would
-> want to be able to watch them.
Probably the US version of the set would also be multi-system, the
difference would be in the tuning section only. This might involve
something as simple as replacing one microchip. It might not, of course!
A call to Grundig might be useful, although they normally only deal with
their own account holders.
-> Thanks for the reply, though.
No problem.
rgds
LAurence